[U-Boot] [PATCH][v3] armv8: lx2160a: Add LX2160A SoC Support
Priyanka Jain
priyanka.jain at nxp.com
Mon Oct 29 09:17:09 UTC 2018
LX2160A Soc is based on Layerscape Chassis Generation 3.2 Architecture.
Features:
16 ARM v8 Cortex-A72 cores in 8 cluster, CCN508, SEC,
two 64-bit DDR4 memory controller, RGMII, 8 I2C controllers,
3 serdes modules, USB 3.0, SATA, 4 PL011 SBSA UARTs,
4 TZASC instances, etc.
SoC personalites:
LX2120A is SoC with Twelve 64-bit ARM v8 Cortex-A72 CPUs
LX2080A is SoC with Eight 64-bit ARM v8 Cortex-A72 CPUs
Signed-off-by: Bao Xiaowei <xiaowei.bao at nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma at nxp.com>
Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
---
Changes for v3:
Add CONFIG_SYS_FSL_RST_ADDR define
Changes for v2:
Add CCN508 define
Rebased on TF-A Boot support for NXP Chassis 2 platforms
Removed eSDHC nodes from dts, will be send in separate patch.
Add reset related changes
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 52 +++++++-
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 6 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 15 ++-
arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 57 +++++++++
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 36 ++++++
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c | 132 +++++++++++++++++++++
arch/arm/dts/fsl-lx2160a.dtsi | 118 ++++++++++++++++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 56 +++++++++
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 28 +++++
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 26 ++++
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 6 +
.../asm/arch-fsl-layerscape/stream_id_lsch3.h | 9 +-
drivers/ddr/fsl/Kconfig | 1 +
drivers/net/ldpaa_eth/Makefile | 3 +-
drivers/net/ldpaa_eth/lx2160a.c | 107 +++++++++++++++++
16 files changed, 644 insertions(+), 10 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c
create mode 100644 arch/arm/dts/fsl-lx2160a.dtsi
create mode 100644 drivers/net/ldpaa_eth/lx2160a.c
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 650ac94..2b086da 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -170,6 +170,42 @@ config ARCH_LS2080A
imply DISTRO_DEFAULTS
imply PANIC_HANG
+config ARCH_LX2160A
+ bool
+ select ARMV8_SET_SMPEN
+ select FSL_LSCH3
+ select NXP_LSCH3_2
+ select SYS_HAS_SERDES
+ select SYS_FSL_SRDS_1
+ select SYS_FSL_SRDS_2
+ select SYS_NXP_SRDS_3
+ select SYS_FSL_DDR
+ select SYS_FSL_DDR_LE
+ select SYS_FSL_DDR_VER_50
+ select SYS_FSL_EC1
+ select SYS_FSL_EC2
+ select SYS_FSL_HAS_RGMII
+ select SYS_FSL_HAS_SEC
+ select SYS_FSL_HAS_CCN508
+ select SYS_FSL_HAS_DDR4
+ select SYS_FSL_SEC_COMPAT_5
+ select SYS_FSL_SEC_LE
+ select ARCH_EARLY_INIT_R
+ select BOARD_EARLY_INIT_F
+ select SYS_I2C_MXC
+ select SYS_I2C_MXC_I2C1
+ select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C3
+ select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC_I2C5
+ select SYS_I2C_MXC_I2C6
+ select SYS_I2C_MXC_I2C7
+ select SYS_I2C_MXC_I2C8
+ imply DISTRO_DEFAULTS
+ imply PANIC_HANG
+ imply SCSI
+ imply SCSI_AHCI
+
config FSL_LSCH2
bool
select SYS_FSL_HAS_CCI400
@@ -185,7 +221,7 @@ config NXP_LSCH3_2
config FSL_MC_ENET
bool "Management Complex network"
- depends on ARCH_LS2080A || ARCH_LS1088A
+ depends on ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A
default y
select RESV_RAM
help
@@ -202,6 +238,7 @@ config FSL_PCIE_COMPAT
default "fsl,ls1046a-pcie" if ARCH_LS1046A
default "fsl,ls2080a-pcie" if ARCH_LS2080A
default "fsl,ls1088a-pcie" if ARCH_LS1088A
+ default "fsl,lx2160a-pcie" if ARCH_LX2160A
help
This compatible is used to find pci controller node in Kernel DT
to complete fixup.
@@ -300,6 +337,7 @@ config MAX_CPUS
default 4 if ARCH_LS1046A
default 16 if ARCH_LS2080A
default 8 if ARCH_LS1088A
+ default 16 if ARCH_LX2160A
default 1
help
Set this number to the maximum number of possible CPUs in the SoC.
@@ -342,6 +380,9 @@ config SYS_FSL_HAS_CCI400
config SYS_FSL_HAS_CCN504
bool
+config SYS_FSL_HAS_CCN508
+ bool
+
config SYS_FSL_HAS_DP_DDR
bool
@@ -404,6 +445,7 @@ config SYS_FSL_DSPI_CLK_DIV
config SYS_FSL_DUART_CLK_DIV
int "DUART clock divider"
default 1 if ARCH_LS1043A
+ default 4 if ARCH_LX2160A
default 2
help
This is the divider that is used to derive DUART clock from Platform
@@ -464,13 +506,15 @@ config RESV_RAM
config SYS_FSL_EC1
bool
help
- Ethernet controller 1, this is connected to MAC3.
+ Ethernet controller 1, this is connected to
+ MAC17 for LX2160A or to MAC3 for other SoCs
Provides DPAA2 capabilities
config SYS_FSL_EC2
bool
help
- Ethernet controller 2, this is connected to MAC4.
+ Ethernet controller 2, this is connected to
+ MAC18 for LX2160A or to MAC4 for other SoCs
Provides DPAA2 capabilities
config SYS_FSL_ERRATUM_A008336
@@ -506,7 +550,7 @@ config SYS_FSL_HAS_RGMII
config SYS_MC_RSV_MEM_ALIGN
hex "Management Complex reserved memory alignment"
depends on RESV_RAM
- default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A
+ default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A
help
Reserved memory needs to be aligned for MC to use. Default value
is 512MB.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 91fdbad..e9bc987 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0+
-#
+# Copyright 2016-2018 NXP
# Copyright 2014-2015, Freescale Semiconductor
obj-y += cpu.o
@@ -22,6 +22,10 @@ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o
endif
endif
+ifneq ($(CONFIG_ARCH_LX2160A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += lx2160a_serdes.o
+endif
+
ifneq ($(CONFIG_ARCH_LS2080A),)
obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 60b0575..a35958a 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -60,6 +60,9 @@ static struct cpu_type cpu_type_list[] = {
CPU_TYPE_ENTRY(LS1084A, LS1084A, 8),
CPU_TYPE_ENTRY(LS1048A, LS1048A, 4),
CPU_TYPE_ENTRY(LS1044A, LS1044A, 4),
+ CPU_TYPE_ENTRY(LX2160A, LX2160A, 16),
+ CPU_TYPE_ENTRY(LX2120A, LX2120A, 12),
+ CPU_TYPE_ENTRY(LX2080A, LX2080A, 8),
};
#define EARLY_PGTABLE_SIZE 0x5000
@@ -246,7 +249,7 @@ static struct mm_region final_map[] = {
PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
},
-#ifdef CONFIG_ARCH_LS2080A
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A)
{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
CONFIG_SYS_PCIE4_PHYS_SIZE,
PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
@@ -366,6 +369,10 @@ void cpu_name(char *name)
for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) {
strcpy(name, cpu_type_list[i].name);
+#ifdef CONFIG_ARCH_LX2160A
+ if (IS_C_PROCESSOR(svr))
+ strcat(name, "C");
+#endif
if (IS_E_PROCESSOR(svr))
strcat(name, "E");
@@ -1165,10 +1172,16 @@ void __efi_runtime reset_cpu(ulong addr)
{
u32 val;
+#ifdef CONFIG_ARCH_LX2160A
+ val = in_le32(rstcr);
+ val |= 0x01;
+ out_le32(rstcr, val);
+#else
/* Raise RESET_REQ_B */
val = scfg_in32(rstcr);
val |= 0x02;
scfg_out32(rstcr, val);
+#endif
}
#ifdef CONFIG_EFI_LOADER
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
index 276ab90..a0e2621 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
@@ -7,6 +7,7 @@ SoC overview
5. LS1046A
6. LS2088A
7. LS2081A
+ 8. LX2160A
LS1043A
---------
@@ -271,3 +272,59 @@ Refer to LS2084A(LS2088A) section above for details.
It has one more similar SoC personality
1)LS2041A, few difference w.r.t. LS2081A:
a) Four 64-bit ARM v8 Cortex-A72 CPUs
+
+LX2160A
+--------
+The QorIQ LX2160A processor is built in the 16FFC process on
+the Layerscape architecture combining sixteen ARM A72 processor
+cores with advanced, high-performance datapath acceleration and
+network, peripheral interfaces required for networking, wireless
+infrastructure, storage, and general-purpose embedded applications.
+
+LX2160A is compliant with the Layerscape Chassis Generation 3.2.
+
+The LX2160A SoC includes the following function and features:
+ Sixteen 32-bit / 64-bit ARM v8 A72 CPUs
+ Cache Coherent Interconnect Fabric (CCN508 aka “Eliot”)
+ Two 64-bit 3.2GT/s DDR4 SDRAM memory controllers with ECC.
+ Data path acceleration architecture (DPAA2)
+ 24 Serdes lanes at up to 25 GHz
+ Ethernet interfaces
+ Single WRIOP tile supporting 130Gbps using 18 MACs
+ Support for 10G-SXGMII (aka USXGMII).
+ Support for SGMII (and 1000Base-KX)
+ Support for XFI (and 10GBase-KR)
+ Support for CAUI4 (100G); CAUI2 (50G) and 25G-AUI(25G).
+ Support for XLAUI (and 40GBase-KR4) for 40G.
+ Support for two RGMII parallel interfaces.
+ Energy efficient Ethernet support (802.3az)
+ IEEE 1588 support.
+ High-speed peripheral interfaces
+ Two PCIe Gen 4.0 8-lane controllers supporting SR-IOV,
+ Four PCIe Gen 4.0 4-lane controllers.
+ Four serial ATA (SATA 3.0) controllers.
+ Two USB 3.0 controllers with integrated PHY
+ Two Enhanced secure digital host controllers
+ Two Controller Area Network (CAN) modules
+ Flexible Serial peripheral interface (FlexSPI) controller.
+ Three Serial peripheral interface (SPI) controllers.
+ Eight I2C Controllers.
+ Four PL011 UARTs supporting two 4-pin UART ports or four 2-pin UART ports.
+ General Purpose IO (GPIO)
+ Support for hardware virtualization and partitioning (ARM MMU-500)
+ Support for GIC (ARM GIC-500)
+ QorIQ platform Trust Architecture 3.0
+ One Secure WatchDog timer and one Non-Secure Watchdog timer.
+ ARM Generic Timer
+ Two Flextimers
+ Debug supporting run control, data acquisition, high-speed trace,
+ performance/event monitoring
+ Thermal Monitor Unit (TMU) with +/- 2C accuracy
+ Support for Voltage ID (VID) for yield improvement
+
+LX2160A SoC has 2 more similar SoC personalities
+1)LX2120A, few difference w.r.t. LX2160A:
+ a) Twelve 64-bit ARM v8 Cortex-A72 CPUs
+
+2)LX2080A, few difference w.r.t. LX2160A:
+ a) Eight 64-bit ARM v8 Cortex-A72 CPUs
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index bb50e3d..ab1be3f 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -22,9 +22,18 @@ static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT];
#endif
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+#ifdef CONFIG_ARCH_LX2160A
+int xfi_dpmac[XFI14 + 1];
+int sgmii_dpmac[SGMII18 + 1];
+int a25gaui_dpmac[_25GE10 + 1];
+int xlaui_dpmac[_40GE2 + 1];
+int caui2_dpmac[_50GE2 + 1];
+int caui4_dpmac[_100GE2 + 1];
+#else
int xfi_dpmac[XFI8 + 1];
int sgmii_dpmac[SGMII16 + 1];
#endif
+#endif
__weak void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl)
{
@@ -146,6 +155,32 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
else {
serdes_prtcl_map[lane_prtcl] = 1;
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+#ifdef CONFIG_ARCH_LX2160A
+ if (lane_prtcl >= XFI1 && lane_prtcl <= XFI14)
+ wriop_init_dpmac(sd, xfi_dpmac[lane_prtcl],
+ (int)lane_prtcl);
+
+ if (lane_prtcl >= SGMII1 && lane_prtcl <= SGMII18)
+ wriop_init_dpmac(sd, sgmii_dpmac[lane_prtcl],
+ (int)lane_prtcl);
+
+ if (lane_prtcl >= _25GE1 && lane_prtcl <= _25GE10)
+ wriop_init_dpmac(sd, a25gaui_dpmac[lane_prtcl],
+ (int)lane_prtcl);
+
+ if (lane_prtcl >= _40GE1 && lane_prtcl <= _40GE2)
+ wriop_init_dpmac(sd, xlaui_dpmac[lane_prtcl],
+ (int)lane_prtcl);
+
+ if (lane_prtcl >= _50GE1 && lane_prtcl <= _50GE2)
+ wriop_init_dpmac(sd, caui2_dpmac[lane_prtcl],
+ (int)lane_prtcl);
+
+ if (lane_prtcl >= _100GE1 && lane_prtcl <= _100GE2)
+ wriop_init_dpmac(sd, caui4_dpmac[lane_prtcl],
+ (int)lane_prtcl);
+
+#else
switch (lane_prtcl) {
case QSGMII_A:
case QSGMII_B:
@@ -167,6 +202,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
break;
}
#endif
+#endif
}
}
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
index cbc9112..6721a57 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S
@@ -354,7 +354,7 @@ get_svr:
ret
#endif
-#ifdef CONFIG_SYS_FSL_HAS_CCN504
+#if defined(CONFIG_SYS_FSL_HAS_CCN504) || defined(CONFIG_SYS_FSL_HAS_CCN508)
hnf_pstate_poll:
/* x0 has the desired status, return 0 for success, 1 for timeout
* clobber x1, x2, x3, x4, x6, x7
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c
new file mode 100644
index 0000000..a04a370
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/lx2160a_serdes.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+
+struct serdes_config {
+ u8 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {0x01, {PCIE2, PCIE2, PCIE2, PCIE2, PCIE1, PCIE1, PCIE1, PCIE1 } },
+ {0x02, {PCIE2, PCIE2, PCIE2, PCIE2, SGMII6, SGMII5, SGMII4, SGMII3 } },
+ {0x03, {PCIE2, PCIE2, PCIE2, PCIE2, XFI6, XFI5, XFI4,
+ XFI3 } },
+ {0x04, {SGMII10, SGMII9, SGMII8, SGMII7, SGMII6, SGMII5, SGMII4,
+ SGMII3 } },
+ {0x05, {XFI10, XFI9, XFI8, XFI7, PCIE1, PCIE1, PCIE1,
+ PCIE1 } },
+ {0x06, {SGMII10, SGMII9, SGMII8, SGMII7, SGMII6, SGMII5, XFI4,
+ XFI3 } },
+ {0x07, {SGMII10, SGMII9, SGMII8, SGMII7, XFI6, XFI5, XFI4,
+ XFI3 } },
+ {0x08, {XFI10, XFI9, XFI8, XFI7, XFI6, XFI5, XFI4, XFI3 } },
+ {0x09, {SGMII10, SGMII9, SGMII8, PCIE2, SGMII6, SGMII5, SGMII4,
+ PCIE1 } },
+ {0x0A, {XFI10, XFI9, XFI8, PCIE2, XFI6, XFI5, XFI4, PCIE1 } },
+ {0x0B, {SGMII10, SGMII9, PCIE2, PCIE2, SGMII6, SGMII5, PCIE1, PCIE1 } },
+ {0x0C, {SGMII10, SGMII9, PCIE2, PCIE2, PCIE1, PCIE1, PCIE1, PCIE1 } },
+ {0x0D, {_100GE2, _100GE2, _100GE2, _100GE2, _100GE1, _100GE1, _100GE1,
+ _100GE1 } },
+ {0x0E, {PCIE2, PCIE2, PCIE2, PCIE2, _100GE1, _100GE1, _100GE1,
+ _100GE1 } },
+ {0x0F, {PCIE2, PCIE2, PCIE2, PCIE2, _50GE2, _50GE2, _50GE1, _50GE1 } },
+ {0x10, {PCIE2, PCIE2, PCIE2, PCIE2, _25GE6, _25GE5, _50GE1, _50GE1 } },
+ {0x11, {PCIE2, PCIE2, PCIE2, PCIE2, _25GE6, _25GE5, _25GE4, _25GE3 } },
+ {0x12, {XFI10, XFI9, XFI8, XFI7, _25GE6, _25GE5, XFI4,
+ XFI3 } },
+ {0x13, {_40GE2, _40GE2, _40GE2, _40GE2, _25GE6, _25GE5, XFI4, XFI3 } },
+ {0x14, {_40GE2, _40GE2, _40GE2, _40GE2, _40GE1, _40GE1, _40GE1,
+ _40GE1 } },
+ {0x15, {_25GE10, _25GE9, PCIE2, PCIE2, _25GE6, _25GE5, _25GE4,
+ _25GE3 } },
+ {0x16, {XFI10, XFI9, PCIE2, PCIE2, XFI6, XFI5, XFI4, XFI3 } },
+ {}
+};
+
+static struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {0x01, {PCIE3, PCIE3, SATA1, SATA2, PCIE4, PCIE4, PCIE4, PCIE4 } },
+ {0x02, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3 } },
+ {0x03, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4 } },
+ {0x04, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2 } },
+ {0x05, {PCIE3, PCIE3, PCIE3, PCIE3, SATA3, SATA4, SATA1, SATA2 } },
+ {0x06, {PCIE3, PCIE3, PCIE3, PCIE3, SGMII15, SGMII16, XFI13,
+ XFI14 } },
+ {0x07, {PCIE3, SGMII12, SGMII17, SGMII18, PCIE4, SGMII16, XFI13,
+ XFI14 } },
+ {0x08, {NONE, NONE, SATA1, SATA2, SATA3, SATA4, XFI13, XFI14 } },
+ {0x09, {SGMII11, SGMII12, SGMII17, SGMII18, SGMII15, SGMII16, SGMII13,
+ SGMII14} },
+ {0x0A, {SGMII11, SGMII12, SGMII17, SGMII18, PCIE4, PCIE4, PCIE4,
+ PCIE4 } },
+ {0x0B, {PCIE3, SGMII12, SGMII17, SGMII18, PCIE4, SGMII16, SGMII13,
+ SGMII14 } },
+ {0x0C, {SGMII11, SGMII12, SGMII17, SGMII18, PCIE4, PCIE4, SATA1,
+ SATA2 } },
+ {0x0D, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SGMII13, SGMII14 } },
+ {0x0E, {PCIE3, PCIE3, SGMII17, SGMII18, PCIE4, PCIE4, SGMII13,
+ SGMII14 } },
+ {}
+};
+
+static struct serdes_config serdes3_cfg_tbl[] = {
+ /* SerDes 3 */
+ {0x02, {PCIE5, PCIE5, PCIE5, PCIE5, PCIE5, PCIE5, PCIE5, PCIE5 } },
+ {0x03, {PCIE5, PCIE5, PCIE5, PCIE5, PCIE6, PCIE6, PCIE6, PCIE6 } },
+ {}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+ serdes2_cfg_tbl,
+ serdes3_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
new file mode 100644
index 0000000..b407dc6
--- /dev/null
+++ b/arch/arm/dts/fsl-lx2160a.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP lx2160a SOC common device tree source
+ *
+ * Copyright 2018 NXP
+ *
+ */
+
+/ {
+ compatible = "fsl,lx2160a";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>;
+ /* DRAM space - 1, size : 2 GB DRAM */
+ };
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "sysclk";
+ };
+
+ clockgen: clocking at 1300000 {
+ compatible = "fsl,ls2080a-clockgen";
+ reg = <0 0x1300000 0 0xa0000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
+
+ gic: interrupt-controller at 6000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ <0x0 0x06200000 0 0x100000>; /* GICR */
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <1 9 0x4>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+ <1 14 0x8>, /* Physical NS PPI, active-low */
+ <1 11 0x8>, /* Virtual PPI, active-low */
+ <1 10 0x8>; /* Hypervisor PPI, active-low */
+ };
+
+ uart0: serial at 21c0000 {
+ compatible = "arm,pl011";
+ reg = <0x0 0x21c0000 0x0 0x1000>;
+ clocks = <&clockgen 4 0>;
+ };
+
+ uart1: serial at 21d0000 {
+ compatible = "arm,pl011";
+ reg = <0x0 0x21d0000 0x0 0x1000>;
+ clocks = <&clockgen 4 0>;
+ };
+
+ uart2: serial at 21e0000 {
+ compatible = "arm,pl011";
+ reg = <0x0 0x21e0000 0x0 0x1000>;
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
+ uart3: serial at 21f0000 {
+ compatible = "arm,pl011";
+ reg = <0x0 0x21f0000 0x0 0x1000>;
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
+
+ dspi0: dspi at 2100000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <0 26 0x4>; /* Level high type */
+ num-cs = <6>;
+ };
+
+ dspi1: dspi at 2110000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2110000 0x0 0x10000>;
+ interrupts = <0 240 0x4>; /* Level high type */
+ num-cs = <6>;
+ };
+
+ dspi2: dspi at 2120000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2120000 0x0 0x10000>;
+ interrupts = <0 241 0x4>; /* Level high type */
+ num-cs = <6>;
+ };
+
+ usb0: usb3 at 3100000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>; /* Level high type */
+ dr_mode = "host";
+ };
+
+ usb1: usb3 at 3110000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>; /* Level high type */
+ dr_mode = "host";
+ };
+};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index bd4ca88..d4f80a2 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -1,5 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
+ * Copyright 2016-2018 NXP
* Copyright 2015, Freescale Semiconductor
*/
@@ -176,6 +177,61 @@
#define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M space */
#define CONFIG_SYS_FSL_OCRAM_SIZE 0x00020000 /* Real size 128K */
+/* LX2160A Soc Support */
+#elif defined(CONFIG_ARCH_LX2160A)
+#define TZPC_BASE 0x02200000
+#define TZPCDECPROT_0_SET_BASE (TZPC_BASE + 0x804)
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_EARLY_INIT
+#define SRDS_MAX_LANES 8
+#ifndef L1_CACHE_BYTES
+#define L1_CACHE_SHIFT 6
+#define L1_CACHE_BYTES BIT(L1_CACHE_SHIFT)
+#endif
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1, 4, 4, 4, 4 }
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
+
+#define CONFIG_SYS_PAGE_SIZE 0x10000
+
+#define CONFIG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */
+#define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M space */
+#define CONFIG_SYS_FSL_OCRAM_SIZE 0x00040000 /* Real size 256K */
+
+/* DDR */
+#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+#define CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define CONFIG_SYS_FSL_ESDHC_LE
+#define CONFIG_SYS_FSL_PEX_LUT_LE
+
+#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE 0x06000000
+#define GICR_BASE 0x06200000
+
+/* SMMU Definitions */
+#define SMMU_BASE 0x05000000 /* GR0 Base */
+
+/* SFP */
+#define CONFIG_SYS_FSL_SFP_VER_3_4
+#define CONFIG_SYS_FSL_SFP_LE
+#define CONFIG_SYS_FSL_SRK_LE
+
+/* Security Monitor */
+#define CONFIG_SYS_FSL_SEC_MON_LE
+
+/* Secure Boot */
+#define CONFIG_ESBC_HDR_LS
+
+/* DCFG - GUR */
+#define CONFIG_SYS_FSL_CCSR_GUR_LE
+
+#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1
+
#elif defined(CONFIG_FSL_LSCH2)
#define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */
#define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M space */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index c041a31..68354ff 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -20,8 +20,12 @@ enum srds_prtcl {
PCIE2,
PCIE3,
PCIE4,
+ PCIE5,
+ PCIE6,
SATA1,
SATA2,
+ SATA3,
+ SATA4,
XAUI1,
XAUI2,
XFI1,
@@ -32,6 +36,12 @@ enum srds_prtcl {
XFI6,
XFI7,
XFI8,
+ XFI9,
+ XFI10,
+ XFI11,
+ XFI12,
+ XFI13,
+ XFI14,
SGMII1,
SGMII2,
SGMII3,
@@ -48,10 +58,28 @@ enum srds_prtcl {
SGMII14,
SGMII15,
SGMII16,
+ SGMII17,
+ SGMII18,
QSGMII_A,
QSGMII_B,
QSGMII_C,
QSGMII_D,
+ _25GE1,
+ _25GE2,
+ _25GE3,
+ _25GE4,
+ _25GE5,
+ _25GE6,
+ _25GE7,
+ _25GE8,
+ _25GE9,
+ _25GE10,
+ _40GE1,
+ _40GE2,
+ _50GE1,
+ _50GE2,
+ _100GE1,
+ _100GE2,
SERDES_PRCTL_COUNT
};
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 4e01781..2ed6b99 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -15,7 +15,11 @@
#define CONFIG_SYS_FSL_DDR3_ADDR 0x08210000
#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00E00000)
#define CONFIG_SYS_FSL_PMU_ADDR (CONFIG_SYS_IMMR + 0x00E30000)
+#ifdef CONFIG_ARCH_LX2160A
+#define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR + 0x00e88180)
+#else
#define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR + 0x00E60000)
+#endif
#define CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR (CONFIG_SYS_IMMR + 0x00300000)
#define CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR (CONFIG_SYS_IMMR + 0x00310000)
#define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR (CONFIG_SYS_IMMR + 0x00370000)
@@ -324,6 +328,28 @@ struct ccsr_gur {
#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT
#define FSL_CHASSIS3_SRDS1_REGSR 29
#define FSL_CHASSIS3_SRDS2_REGSR 29
+#elif defined(CONFIG_ARCH_LX2160A)
+#define FSL_CHASSIS3_EC1_REGSR 27
+#define FSL_CHASSIS3_EC2_REGSR 27
+#define FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK 0x00000003
+#define FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT 0
+#define FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK 0x00000007
+#define FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT 2
+#define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK 0x001F0000
+#define FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT 16
+#define FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK 0x03E00000
+#define FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT 21
+#define FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_MASK 0x7C000000
+#define FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_SHIFT 26
+#define FSL_CHASSIS3_SRDS1_PRTCL_MASK FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS2_PRTCL_MASK FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS3_PRTCL_MASK FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_MASK
+#define FSL_CHASSIS3_SRDS3_PRTCL_SHIFT FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_SHIFT
+#define FSL_CHASSIS3_SRDS1_REGSR 29
+#define FSL_CHASSIS3_SRDS2_REGSR 29
+#define FSL_CHASSIS3_SRDS3_REGSR 29
#elif defined(CONFIG_ARCH_LS1088A)
#define FSL_CHASSIS3_EC1_REGSR 26
#define FSL_CHASSIS3_EC2_REGSR 26
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index daa1c70..f5bef6d 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -96,12 +96,18 @@ enum boot_src get_boot_src(void);
#define SVR_LS2044A 0x870930
#define SVR_LS2081A 0x870918
#define SVR_LS2041A 0x870914
+#define SVR_LX2160A 0x873601
+#define SVR_LX2120A 0x873621
+#define SVR_LX2080A 0x873603
#define SVR_MAJ(svr) (((svr) >> 4) & 0xf)
#define SVR_MIN(svr) (((svr) >> 0) & 0xf)
#define SVR_REV(svr) (((svr) >> 0) & 0xff)
#define SVR_SOC_VER(svr) (((svr) >> 8) & SVR_WO_E)
#define IS_E_PROCESSOR(svr) (!((svr >> 8) & 0x1))
+#ifdef CONFIG_ARCH_LX2160A
+#define IS_C_PROCESSOR(svr) (!((svr >> 12) & 0x1))
+#endif
#define IS_SVR_REV(svr, maj, min) \
((SVR_MAJ(svr) == (maj)) && (SVR_MIN(svr) == (min)))
#define SVR_DEV(svr) ((svr) >> 8)
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index 8d002da..e017d8b 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -1,5 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
+ * Copyright 2015-2018 NXP
* Copyright 2014 Freescale Semiconductor, Inc.
*
*/
@@ -69,11 +70,11 @@
#define FSL_SDMMC_STREAM_ID 3
#define FSL_SATA1_STREAM_ID 4
-#if defined(CONFIG_ARCH_LS2080A)
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A)
#define FSL_SATA2_STREAM_ID 5
#endif
-#if defined(CONFIG_ARCH_LS2080A)
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A)
#define FSL_DMA_STREAM_ID 6
#elif defined(CONFIG_ARCH_LS1088A)
#define FSL_DMA_STREAM_ID 5
@@ -82,6 +83,10 @@
/* PCI - programmed in PEXn_LUT */
#define FSL_PEX_STREAM_ID_START 7
+#ifdef CONFIG_ARCH_LX2160A
+#define FSL_PEX_STREAM_ID_NUM (0x100)
+#endif
+
#if defined(CONFIG_ARCH_LS2080A)
#define FSL_PEX_STREAM_ID_END 22
#elif defined(CONFIG_ARCH_LS1088A)
diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig
index a3d2bd5..c5bd8a8 100644
--- a/drivers/ddr/fsl/Kconfig
+++ b/drivers/ddr/fsl/Kconfig
@@ -34,6 +34,7 @@ config SYS_NUM_DDR_CTLRS
ARCH_P4080 || \
ARCH_P5020 || \
ARCH_P5040 || \
+ ARCH_LX2160A || \
ARCH_T4160
default 1
diff --git a/drivers/net/ldpaa_eth/Makefile b/drivers/net/ldpaa_eth/Makefile
index 477ee4f..1d85b2c 100644
--- a/drivers/net/ldpaa_eth/Makefile
+++ b/drivers/net/ldpaa_eth/Makefile
@@ -1,8 +1,9 @@
# SPDX-License-Identifier: GPL-2.0+
-#
+# Copyright 2015-2018 NXP
# Copyright 2014 Freescale Semiconductor, Inc.
obj-y += ldpaa_wriop.o
obj-y += ldpaa_eth.o
obj-$(CONFIG_ARCH_LS2080A) += ls2080a.o
obj-$(CONFIG_ARCH_LS1088A) += ls1088a.o
+obj-$(CONFIG_ARCH_LX2160A) += lx2160a.o
diff --git a/drivers/net/ldpaa_eth/lx2160a.c b/drivers/net/ldpaa_eth/lx2160a.c
new file mode 100644
index 0000000..7dd46c0
--- /dev/null
+++ b/drivers/net/ldpaa_eth/lx2160a.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+#include <common.h>
+#include <phy.h>
+#include <fsl-mc/ldpaa_wriop.h>
+#include <asm/io.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
+
+u32 dpmac_to_devdisr[] = {
+ [WRIOP1_DPMAC1] = FSL_CHASSIS3_DEVDISR2_DPMAC1,
+ [WRIOP1_DPMAC2] = FSL_CHASSIS3_DEVDISR2_DPMAC2,
+ [WRIOP1_DPMAC3] = FSL_CHASSIS3_DEVDISR2_DPMAC3,
+ [WRIOP1_DPMAC4] = FSL_CHASSIS3_DEVDISR2_DPMAC4,
+ [WRIOP1_DPMAC5] = FSL_CHASSIS3_DEVDISR2_DPMAC5,
+ [WRIOP1_DPMAC6] = FSL_CHASSIS3_DEVDISR2_DPMAC6,
+ [WRIOP1_DPMAC7] = FSL_CHASSIS3_DEVDISR2_DPMAC7,
+ [WRIOP1_DPMAC8] = FSL_CHASSIS3_DEVDISR2_DPMAC8,
+ [WRIOP1_DPMAC9] = FSL_CHASSIS3_DEVDISR2_DPMAC9,
+ [WRIOP1_DPMAC10] = FSL_CHASSIS3_DEVDISR2_DPMAC10,
+ [WRIOP1_DPMAC11] = FSL_CHASSIS3_DEVDISR2_DPMAC11,
+ [WRIOP1_DPMAC12] = FSL_CHASSIS3_DEVDISR2_DPMAC12,
+ [WRIOP1_DPMAC13] = FSL_CHASSIS3_DEVDISR2_DPMAC13,
+ [WRIOP1_DPMAC14] = FSL_CHASSIS3_DEVDISR2_DPMAC14,
+ [WRIOP1_DPMAC15] = FSL_CHASSIS3_DEVDISR2_DPMAC15,
+ [WRIOP1_DPMAC16] = FSL_CHASSIS3_DEVDISR2_DPMAC16,
+ [WRIOP1_DPMAC17] = FSL_CHASSIS3_DEVDISR2_DPMAC17,
+ [WRIOP1_DPMAC18] = FSL_CHASSIS3_DEVDISR2_DPMAC18,
+};
+
+static int is_device_disabled(int dpmac_id)
+{
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+ u32 devdisr2 = in_le32(&gur->devdisr2);
+
+ return dpmac_to_devdisr[dpmac_id] & devdisr2;
+}
+
+void wriop_dpmac_disable(int dpmac_id)
+{
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+ setbits_le32(&gur->devdisr2, dpmac_to_devdisr[dpmac_id]);
+}
+
+void wriop_dpmac_enable(int dpmac_id)
+{
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+ clrbits_le32(&gur->devdisr2, dpmac_to_devdisr[dpmac_id]);
+}
+
+phy_interface_t wriop_dpmac_enet_if(int dpmac_id, int lane_prtcl)
+{
+ enum srds_prtcl;
+
+ if (is_device_disabled(dpmac_id + 1))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if (lane_prtcl >= SGMII1 && lane_prtcl <= SGMII18)
+ return PHY_INTERFACE_MODE_SGMII;
+
+ if (lane_prtcl >= XFI1 && lane_prtcl <= XFI14)
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if (lane_prtcl >= _25GE1 && lane_prtcl <= _25GE10)
+ return PHY_INTERFACE_MODE_25G_AUI;
+
+ if (lane_prtcl >= _40GE1 && lane_prtcl <= _40GE2)
+ return PHY_INTERFACE_MODE_XLAUI;
+
+ if (lane_prtcl >= _50GE1 && lane_prtcl <= _50GE2)
+ return PHY_INTERFACE_MODE_CAUI2;
+
+ if (lane_prtcl >= _100GE1 && lane_prtcl <= _100GE2)
+ return PHY_INTERFACE_MODE_CAUI4;
+
+ return PHY_INTERFACE_MODE_NONE;
+}
+
+#ifdef CONFIG_SYS_FSL_HAS_RGMII
+void fsl_rgmii_init(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 ec;
+
+#ifdef CONFIG_SYS_FSL_EC1
+ ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC1_REGSR - 1])
+ & FSL_CHASSIS3_EC1_REGSR_PRTCL_MASK;
+ ec >>= FSL_CHASSIS3_EC1_REGSR_PRTCL_SHIFT;
+
+ if (!ec)
+ wriop_init_dpmac_enet_if(17, PHY_INTERFACE_MODE_RGMII_ID);
+#endif
+
+#ifdef CONFIG_SYS_FSL_EC2
+ ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC2_REGSR - 1])
+ & FSL_CHASSIS3_EC2_REGSR_PRTCL_MASK;
+ ec >>= FSL_CHASSIS3_EC2_REGSR_PRTCL_SHIFT;
+
+ if (!ec)
+ wriop_init_dpmac_enet_if(18, PHY_INTERFACE_MODE_RGMII_ID);
+#endif
+}
+#endif
--
2.7.4
More information about the U-Boot
mailing list