[U-Boot] [PATCH v3 09/19] omap: detect the board after DM is available

[Jean-Jacques Hiblot]

In order to use DM_I2C, we need to move the board detection after the
early SPL initialization.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---

Changes in v3: None
Changes in v2: None

 arch/arm/mach-omap2/am33xx/board.c  | 9 ++++++---
 arch/arm/mach-omap2/hwinit-common.c | 5 ++---
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index c121f27..2fc364d 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -472,12 +472,15 @@ void early_system_init(void)
 #ifdef CONFIG_DEBUG_UART_OMAP
 	debug_uart_init();
 #endif
-#ifdef CONFIG_TI_I2C_BOARD_DETECT
-	do_board_detect();
-#endif
+
 #ifdef CONFIG_SPL_BUILD
 	spl_early_init();
 #endif
+
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
+	do_board_detect();
+#endif
+
 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
 	/* Enable RTC32K clock */
 	rtc32k_enable();
diff --git a/arch/arm/mach-omap2/hwinit-common.c b/arch/arm/mach-omap2/hwinit-common.c
index 1a24acb..d0781d7 100644
--- a/arch/arm/mach-omap2/hwinit-common.c
+++ b/arch/arm/mach-omap2/hwinit-common.c
@@ -193,11 +193,10 @@ void early_system_init(void)
 	 * to prevent overwrites.
 	 */
 	save_omap_boot_params();
-#endif
-	do_board_detect();
-#ifdef CONFIG_SPL_BUILD
 	spl_early_init();
 #endif
+	do_board_detect();
+
 	vcores_init();
 #ifdef CONFIG_DEBUG_UART_OMAP
 	debug_uart_init();
-- 
2.7.4