[U-Boot] [PATCH v1 07/19] configs: MediaTek: add MT7623 Bananapi R2 board support

[Ryder Lee]

From: Weijie Gao <weijie.gao at mediatek.com>

This patch adds defconfig for the MT7623 Bananapi R2 board.

Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee at mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg at gmail.com>
---
 configs/mt7623n_bpir2_defconfig | 53 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 configs/mt7623n_bpir2_defconfig

diff --git a/configs/mt7623n_bpir2_defconfig b/configs/mt7623n_bpir2_defconfig
new file mode 100644
index 0000000..a896d6a
--- /dev/null
+++ b/configs/mt7623n_bpir2_defconfig
@@ -0,0 +1,53 @@
+CONFIG_ARM=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_SYS_TEXT_BASE=0x81e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_TARGET_MT7623=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+CONFIG_DEFAULT_FDT_FILE="mt7623n-bananapi-bpi-r2"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_READ=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PING=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_EMBED=y
+CONFIG_DEFAULT_DEVICE_TREE="mt7623n-bananapi-bpi-r2"
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_MMC=y
+# CONFIG_MMC_QUIRKS is not set
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_MTK=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7623=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_TIMER=y
+CONFIG_MTK_TIMER=y
+CONFIG_WDT_MTK=y
+CONFIG_LZMA=y
+# CONFIG_EFI_LOADER is not set
-- 
1.9.1