[U-Boot] [PATCH] xilinx: Sync defconfigs with current Kconfig

[Michal Simek]

There are some inconsistencies which should be fixed.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 configs/avnet_ultra96_rev1_defconfig        | 2 +-
 configs/microblaze-generic_defconfig        | 2 +-
 configs/xilinx_zynqmp_zcu100_revC_defconfig | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/configs/avnet_ultra96_rev1_defconfig b/configs/avnet_ultra96_rev1_defconfig
index a86719bc29ef..7c325dd6649c 100644
--- a/configs/avnet_ultra96_rev1_defconfig
+++ b/configs/avnet_ultra96_rev1_defconfig
@@ -20,7 +20,6 @@ CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_CMD_BOOTMENU=y
-CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
@@ -30,6 +29,7 @@ CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index 7cd5e6da3162..ae61c2580f34 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -44,9 +44,9 @@ CONFIG_DM_GPIO=y
 CONFIG_XILINX_GPIO=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
+CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_MTD_DEVICE=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_PHY_ATHEROS=y
 CONFIG_PHY_BROADCOM=y
 CONFIG_PHY_DAVICOM=y
diff --git a/configs/xilinx_zynqmp_zcu100_revC_defconfig b/configs/xilinx_zynqmp_zcu100_revC_defconfig
index 48508b59e3d6..ad8c8f7d89e8 100644
--- a/configs/xilinx_zynqmp_zcu100_revC_defconfig
+++ b/configs/xilinx_zynqmp_zcu100_revC_defconfig
@@ -20,7 +20,6 @@ CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_ATF=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_CMD_BOOTMENU=y
-CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
@@ -30,6 +29,7 @@ CONFIG_CMD_FPGA_LOADP=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-- 
1.9.1