[U-Boot] [PATCH] ARM: dts: rmobile: Enable SDR104 on Salvator-X and ULCB

[Marek Vasut]

Enable SDR104 modes on M3W and H3 boards. With the SDHI fixes
in place, it is now possible to use SDR104.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
 arch/arm/dts/salvator-common.dtsi | 10 ++++++++++
 arch/arm/dts/ulcb.dtsi            |  5 +++++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi
index 826a02c333..d2d667bb01 100644
--- a/arch/arm/dts/salvator-common.dtsi
+++ b/arch/arm/dts/salvator-common.dtsi
@@ -623,8 +623,13 @@
 	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
 	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
+
+	max-frequency = <208000000>;
 };
 
 &sdhi2 {
@@ -640,6 +645,7 @@
 	non-removable;
 	fixed-emmc-driver-type = <1>;
 	status = "okay";
+	max-frequency = <200000000>;
 };
 
 &sdhi3 {
@@ -652,8 +658,12 @@
 	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
 	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
+	max-frequency = <208000000>;
 };
 
 &ssi1 {
diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
index b61e2656d5..44dd84179f 100644
--- a/arch/arm/dts/ulcb.dtsi
+++ b/arch/arm/dts/ulcb.dtsi
@@ -401,8 +401,12 @@
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
 	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	status = "okay";
+	max-frequency = <208000000>;
 };
 
 &sdhi2 {
@@ -417,6 +421,7 @@
 	mmc-hs200-1_8v;
 	non-removable;
 	status = "okay";
+	max-frequency = <200000000>;
 };
 
 &ssi1 {
-- 
2.18.0