[U-Boot] [linux-sunxi] [PATCH v4] sunxi: add support for Banana Pi M2 Zero board

[Jagan Teki]

On Tue, Oct 30, 2018 at 11:57 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> On Sat, Oct 27, 2018 at 10:41 AM Icenowy Zheng <icenowy at aosc.io> wrote:
> >
> > From: Jun Nie <jun.nie at linaro.org>
> >
> > Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit
> > 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one
> > powering-only) and a miniHDMI port.
> >
> > Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> > Signed-off-by: Jun Nie <jun.nie at linaro.org>
> > ---
> > Changes in v4:
> > - Fixed MMC card detect on product batch boards.
> > - Synced the device tree from the same commit with other H3/H2+ DTs.
> >
> >  arch/arm/dts/Makefile                         |   1 +
> >  .../dts/sun8i-h2-plus-bananapi-m2-zero.dts    | 121 ++++++++++++++++++
> >  board/sunxi/MAINTAINERS                       |   5 +
> >  configs/bananapi_m2_zero_defconfig            |  13 ++
> >  4 files changed, 140 insertions(+)
> >  create mode 100644 arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> >  create mode 100644 configs/bananapi_m2_zero_defconfig
> >
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index 0de6234eec..c2de60e031 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -365,6 +365,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
> >         sun8i-a83t-cubietruck-plus.dtb \
> >         sun8i-a83t-tbs-a711.dts
> >  dtb-$(CONFIG_MACH_SUN8I_H3) += \
> > +       sun8i-h2-plus-bananapi-m2-zero.dtb \
> >         sun8i-h2-plus-libretech-all-h3-cc.dtb \
> >         sun8i-h2-plus-orangepi-r1.dtb \
> >         sun8i-h2-plus-orangepi-zero.dtb \
>
> [snip]
>
> >
> > +SINOVOIP BPI M2 ZERO BOARD
>
> Can be "BANANAPI M2 ZERO"
>
> > +M:     Icenowy Zheng <icenowy at aosc.io>
> > +S:     Maintained
> > +F:     configs/Sinovoip_BPI_M2_Zero_defconfig
>
> configs/bananapi_m2_zero_defconfig

If agree? will do above changes while applying?