[U-Boot] [PATCH] cmd: mtdparts: Probe MTD devices in mtdparts_init()

[Boris Brezillon]

On Tue, 30 Oct 2018 11:13:37 +0100
Stefan Roese <sr at denx.de> wrote:

> Hi Boris,
> 
> On 30.10.18 11:03, Boris Brezillon wrote:
> > On Tue, 30 Oct 2018 10:51:51 +0100
> > Stefan Roese <sr at denx.de> wrote:
> >   
> >> Calling "mtdparts" currently fails when its called before any other mtd
> >> command (or ubi command) has been called. The MTD devices are not
> >> probed at this point and therefore it fails e.g. with this message:
> >>  
> >> => mtdparts  
> >> Device spi-nand0 not found!  
> > 
> > IIRC, we decided that mtdparts should not call mtd_probe_devices() to
> > encourage people to stop using it.  
> 
> I see. But I don't quite get how this missing call (and reslting
> error message) would encourage people to stop using it.

You're right, this message does not encourage people to stop using
mtdparts on existing setups (mtdparts should work just fine on any MTD
devices except SPI NANDs) but it does discourage them from using it on
spi-nand devices since it returns an error.

> >>
> >> This patch adds a call to mtd_probe_devices() to mtdparts_init() to
> >> solve this issue. This also fixes a problem when calling "ubi part"
> >> as first flash storage related command.  
> > 
> > Hm, this one is unexpected. Miquel, any idea why this happens. Do we
> > need to enable a specific option if we want mtd_probe_devices() to be
> > called in the ubi part path?  
> 
> Please note that "ubi part part-foo" does still work. It only
> prints this error message before attaching the MTD partition.
> The error is printed because of this call-chain:
> 
> ubi_part()
> ->  ubi_detach()
>      -> mtdparts_init()  
> 
> So again, mtdparts_init() is called without the MTD devices
> being probed.

I guess we forgot to remove this mtdparts_init() call from the detach
path. I think it's no longer needed since we now call
mtd_probe_devices() in ubi_part(), and mtd_probe_devices() will take
care of creating MTD partitions based on the mtdparts= and mtdids=
variables.