[U-Boot] [PATCH 10/13] mmc: tmio: sdhi: Clear HS400 settings when reseting SCC

Marek Vasut marek.vasut at gmail.com
Wed Oct 31 17:16:03 UTC 2018


Make sure to clear HS400 configuration when reseting the SCC block.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Masahiro Yamada <yamada.masahiro at socionext.com>
---
 drivers/mmc/renesas-sdhi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c
index 6b5871a0ae..2949c517cb 100644
--- a/drivers/mmc/renesas-sdhi.c
+++ b/drivers/mmc/renesas-sdhi.c
@@ -34,6 +34,8 @@
 #define   RENESAS_SDHI_SCC_RVSREQ_RVSERR		BIT(2)
 #define RENESAS_SDHI_SCC_SMPCMP			0x818
 #define RENESAS_SDHI_SCC_TMPPORT2			0x81c
+#define   RENESAS_SDHI_SCC_TMPPORT2_HS400EN		BIT(31)
+#define   RENESAS_SDHI_SCC_TMPPORT2_HS400OSEL		BIT(4)
 
 #define RENESAS_SDHI_MAX_TAP 3
 
@@ -90,6 +92,11 @@ static void renesas_sdhi_reset_tuning(struct tmio_sd_priv *priv)
 	reg &= ~RENESAS_SDHI_SCC_CKSEL_DTSEL;
 	tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_CKSEL);
 
+	reg = tmio_sd_readl(priv, RENESAS_SDHI_SCC_TMPPORT2);
+	reg &= ~(RENESAS_SDHI_SCC_TMPPORT2_HS400EN |
+		 RENESAS_SDHI_SCC_TMPPORT2_HS400OSEL);
+	tmio_sd_writel(priv, reg, RENESAS_SDHI_SCC_TMPPORT2);
+
 	reg = tmio_sd_readl(priv, TMIO_SD_CLKCTL);
 	reg |= TMIO_SD_CLKCTL_SCLKEN;
 	tmio_sd_writel(priv, reg, TMIO_SD_CLKCTL);
-- 
2.18.0



More information about the U-Boot mailing list