[U-Boot] [PATCH v1 19/19] dra7: Allow selecting a new dtb after board detection.

Jean-Jacques Hiblot jjhiblot at ti.com
Thu Oct 4 13:47:44 UTC 2018


The DRA7 platforms requires that the dtb used in the SPL really matches the
platform  to have the best MMC performances.
To detect the board type/version an I2C EEPROM is read. This requires that
DM is initialized before the detection. As a consequence we must reset the
DM after the board detection is a new dtb would better match the platform.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>

---

 arch/arm/mach-omap2/hwinit-common.c | 20 ++++++++++++++++++++
 configs/dra7xx_evm_defconfig        |  2 ++
 2 files changed, 22 insertions(+)

diff --git a/arch/arm/mach-omap2/hwinit-common.c b/arch/arm/mach-omap2/hwinit-common.c
index d0781d7..772b4c4 100644
--- a/arch/arm/mach-omap2/hwinit-common.c
+++ b/arch/arm/mach-omap2/hwinit-common.c
@@ -12,6 +12,7 @@
  */
 #include <common.h>
 #include <debug_uart.h>
+#include <fdtdec.h>
 #include <spl.h>
 #include <asm/arch/sys_proto.h>
 #include <linux/sizes.h>
@@ -19,6 +20,7 @@
 #include <asm/omap_common.h>
 #include <linux/compiler.h>
 #include <asm/system.h>
+#include <dm/root.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -171,6 +173,10 @@ void __weak init_package_revision(void)
  */
 void early_system_init(void)
 {
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT)
+	int ret;
+	int rescan;
+#endif
 	init_omap_revision();
 	hw_data_init();
 	init_package_revision();
@@ -186,6 +192,7 @@ void early_system_init(void)
 	do_io_settings();
 #endif
 	setup_early_clocks();
+
 #ifdef CONFIG_SPL_BUILD
 	/*
 	 * Save the boot parameters passed from romcode.
@@ -197,6 +204,19 @@ void early_system_init(void)
 #endif
 	do_board_detect();
 
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_MULTI_DTB_FIT)
+	/*
+	 * Board detection has been done.
+	 * Let us see if another dtb wouldn't be a better match
+	 * for our board
+	 */
+	ret = fdtdec_resetup(&rescan);
+	if (!ret && rescan) {
+		dm_uninit();
+		dm_init_and_scan(true);
+	}
+#endif
+
 	vcores_init();
 #ifdef CONFIG_DEBUG_UART_OMAP
 	debug_uart_init();
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 9546b5e..b4825a5 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -34,11 +34,13 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
 CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm dra76-evm"
 CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT_UNCOMPRESS_SZ=0x9000
 CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
+CONFIG_SPL_DM_DEVICE_REMOVE=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y
-- 
2.7.4



More information about the U-Boot mailing list