[U-Boot] [PATCH v2 15/31] virtio: Add block driver support
Bin Meng
bmeng.cn at gmail.com
Sun Oct 14 13:06:39 UTC 2018
From: Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
This adds virtio block device driver support.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Correct desc->vendor for PCI transport
drivers/virtio/Kconfig | 7 +++
drivers/virtio/Makefile | 1 +
drivers/virtio/virtio_blk.c | 137 ++++++++++++++++++++++++++++++++++++++++++++
drivers/virtio/virtio_blk.h | 129 +++++++++++++++++++++++++++++++++++++++++
4 files changed, 274 insertions(+)
create mode 100644 drivers/virtio/virtio_blk.c
create mode 100644 drivers/virtio/virtio_blk.h
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index e20dd69..b72477a 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -36,4 +36,11 @@ config VIRTIO_NET
This is the virtual net driver for virtio. It can be used with
QEMU based targets.
+config VIRTIO_BLK
+ bool "virtio block driver"
+ depends on VIRTIO
+ help
+ This is the virtual block driver for virtio. It can be used with
+ QEMU based targets.
+
endmenu
diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
index b7764f1..5fe7428 100644
--- a/drivers/virtio/Makefile
+++ b/drivers/virtio/Makefile
@@ -6,3 +6,4 @@
obj-y += virtio-uclass.o virtio_ring.o
obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
+obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o
diff --git a/drivers/virtio/virtio_blk.c b/drivers/virtio/virtio_blk.c
new file mode 100644
index 0000000..e793e34
--- /dev/null
+++ b/drivers/virtio/virtio_blk.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
+ * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+ */
+
+#include <common.h>
+#include <blk.h>
+#include <dm.h>
+#include <virtio_types.h>
+#include <virtio.h>
+#include <virtio_ring.h>
+#include "virtio_blk.h"
+
+struct virtio_blk_priv {
+ struct virtqueue *vq;
+};
+
+static ulong virtio_blk_do_req(struct udevice *dev, u64 sector,
+ lbaint_t blkcnt, void *buffer, u32 type)
+{
+ struct virtio_blk_priv *priv = dev_get_priv(dev);
+ unsigned int num_out = 0, num_in = 0;
+ struct virtio_sg *sgs[3];
+ u8 status;
+ int ret;
+
+ struct virtio_blk_outhdr out_hdr = {
+ .type = cpu_to_virtio32(dev, type),
+ .sector = cpu_to_virtio64(dev, sector),
+ };
+ struct virtio_sg hdr_sg = { &out_hdr, sizeof(out_hdr) };
+ struct virtio_sg data_sg = { buffer, blkcnt * 512 };
+ struct virtio_sg status_sg = { &status, sizeof(status) };
+
+ sgs[num_out++] = &hdr_sg;
+
+ if (type & VIRTIO_BLK_T_OUT)
+ sgs[num_out++] = &data_sg;
+ else
+ sgs[num_out + num_in++] = &data_sg;
+
+ sgs[num_out + num_in++] = &status_sg;
+
+ ret = virtqueue_add(priv->vq, sgs, num_out, num_in);
+ if (ret)
+ return ret;
+
+ virtqueue_kick(priv->vq);
+
+ while (!virtqueue_get_buf(priv->vq, NULL))
+ ;
+
+ return status == VIRTIO_BLK_S_OK ? blkcnt : -EIO;
+}
+
+static ulong virtio_blk_read(struct udevice *dev, lbaint_t start,
+ lbaint_t blkcnt, void *buffer)
+{
+ return virtio_blk_do_req(dev, start, blkcnt, buffer,
+ VIRTIO_BLK_T_IN);
+}
+
+static ulong virtio_blk_write(struct udevice *dev, lbaint_t start,
+ lbaint_t blkcnt, const void *buffer)
+{
+ return virtio_blk_do_req(dev, start, blkcnt, (void *)buffer,
+ VIRTIO_BLK_T_OUT);
+}
+
+static int virtio_blk_bind(struct udevice *dev)
+{
+ struct virtio_dev_priv *uc_priv = dev_get_uclass_priv(dev->parent);
+ struct blk_desc *desc = dev_get_uclass_platdata(dev);
+ int devnum;
+
+ desc->if_type = IF_TYPE_VIRTIO;
+ /*
+ * Initialize the devnum to -ENODEV. This is to make sure that
+ * blk_next_free_devnum() works as expected, since the default
+ * value 0 is a valid devnum.
+ */
+ desc->devnum = -ENODEV;
+ devnum = blk_next_free_devnum(IF_TYPE_VIRTIO);
+ if (devnum < 0)
+ return devnum;
+ desc->devnum = devnum;
+ desc->part_type = PART_TYPE_UNKNOWN;
+ /*
+ * virtio mmio transport supplies string identification for us,
+ * while pci trnasport uses a 2-byte subvendor value.
+ */
+ if (uc_priv->vendor >> 16)
+ sprintf(desc->vendor, "%s", (char *)&uc_priv->vendor);
+ else
+ sprintf(desc->vendor, "%04x", uc_priv->vendor);
+ desc->bdev = dev;
+
+ /* Indicate what driver features we support */
+ virtio_driver_features_init(uc_priv, NULL, 0, NULL, 0);
+
+ return 0;
+}
+
+static int virtio_blk_probe(struct udevice *dev)
+{
+ struct virtio_blk_priv *priv = dev_get_priv(dev);
+ struct blk_desc *desc = dev_get_uclass_platdata(dev);
+ u64 cap;
+ int ret;
+
+ ret = virtio_find_vqs(dev, 1, &priv->vq);
+ if (ret)
+ return ret;
+
+ desc->blksz = 512;
+ virtio_cread(dev, struct virtio_blk_config, capacity, &cap);
+ desc->lba = cap;
+
+ return 0;
+}
+
+static const struct blk_ops virtio_blk_ops = {
+ .read = virtio_blk_read,
+ .write = virtio_blk_write,
+};
+
+U_BOOT_DRIVER(virtio_blk) = {
+ .name = VIRTIO_BLK_DRV_NAME,
+ .id = UCLASS_BLK,
+ .ops = &virtio_blk_ops,
+ .bind = virtio_blk_bind,
+ .probe = virtio_blk_probe,
+ .remove = virtio_reset,
+ .priv_auto_alloc_size = sizeof(struct virtio_blk_priv),
+ .flags = DM_FLAG_ACTIVE_DMA,
+};
diff --git a/drivers/virtio/virtio_blk.h b/drivers/virtio/virtio_blk.h
new file mode 100644
index 0000000..8d8e02f
--- /dev/null
+++ b/drivers/virtio/virtio_blk.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Copyright (C) 2018, Tuomas Tynkkynen <tuomas.tynkkynen at iki.fi>
+ * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
+ *
+ * From Linux kernel include/uapi/linux/virtio_blk.h
+ */
+
+#ifndef _LINUX_VIRTIO_BLK_H
+#define _LINUX_VIRTIO_BLK_H
+
+/* Feature bits */
+#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */
+#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */
+#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */
+#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */
+#define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available */
+#define VIRTIO_BLK_F_TOPOLOGY 10 /* Topology information is available */
+#define VIRTIO_BLK_F_MQ 12 /* Support more than one vq */
+
+/* Legacy feature bits */
+#ifndef VIRTIO_BLK_NO_LEGACY
+#define VIRTIO_BLK_F_BARRIER 0 /* Does host support barriers? */
+#define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */
+#define VIRTIO_BLK_F_FLUSH 9 /* Flush command supported */
+#define VIRTIO_BLK_F_CONFIG_WCE 11 /* Writeback mode available in config */
+#ifndef __KERNEL__
+/* Old (deprecated) name for VIRTIO_BLK_F_FLUSH */
+#define VIRTIO_BLK_F_WCE VIRTIO_BLK_F_FLUSH
+#endif
+#endif /* !VIRTIO_BLK_NO_LEGACY */
+
+#define VIRTIO_BLK_ID_BYTES 20 /* ID string length */
+
+struct __packed virtio_blk_config {
+ /* The capacity (in 512-byte sectors) */
+ __u64 capacity;
+ /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
+ __u32 size_max;
+ /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
+ __u32 seg_max;
+ /* geometry of the device (if VIRTIO_BLK_F_GEOMETRY) */
+ struct virtio_blk_geometry {
+ __u16 cylinders;
+ __u8 heads;
+ __u8 sectors;
+ } geometry;
+
+ /* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
+ __u32 blk_size;
+
+ /* the next 4 entries are guarded by VIRTIO_BLK_F_TOPOLOGY */
+ /* exponent for physical block per logical block */
+ __u8 physical_block_exp;
+ /* alignment offset in logical blocks */
+ __u8 alignment_offset;
+ /* minimum I/O size without performance penalty in logical blocks */
+ __u16 min_io_size;
+ /* optimal sustained I/O size in logical blocks */
+ __u32 opt_io_size;
+
+ /* writeback mode (if VIRTIO_BLK_F_CONFIG_WCE) */
+ __u8 wce;
+ __u8 unused;
+
+ /* number of vqs, only available when VIRTIO_BLK_F_MQ is set */
+ __u16 num_queues;
+};
+
+/*
+ * Command types
+ *
+ * Usage is a bit tricky as some bits are used as flags and some are not.
+ *
+ * Rules:
+ * VIRTIO_BLK_T_OUT may be combined with VIRTIO_BLK_T_SCSI_CMD or
+ * VIRTIO_BLK_T_BARRIER. VIRTIO_BLK_T_FLUSH is a command of its own
+ * and may not be combined with any of the other flags.
+ */
+
+/* These two define direction */
+#define VIRTIO_BLK_T_IN 0
+#define VIRTIO_BLK_T_OUT 1
+
+#ifndef VIRTIO_BLK_NO_LEGACY
+/* This bit says it's a scsi command, not an actual read or write */
+#define VIRTIO_BLK_T_SCSI_CMD 2
+#endif /* VIRTIO_BLK_NO_LEGACY */
+
+/* Cache flush command */
+#define VIRTIO_BLK_T_FLUSH 4
+
+/* Get device ID command */
+#define VIRTIO_BLK_T_GET_ID 8
+
+#ifndef VIRTIO_BLK_NO_LEGACY
+/* Barrier before this op */
+#define VIRTIO_BLK_T_BARRIER 0x80000000
+#endif /* !VIRTIO_BLK_NO_LEGACY */
+
+/*
+ * This comes first in the read scatter-gather list.
+ * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated,
+ * this is the first element of the read scatter-gather list.
+ */
+struct virtio_blk_outhdr {
+ /* VIRTIO_BLK_T* */
+ __virtio32 type;
+ /* io priority */
+ __virtio32 ioprio;
+ /* Sector (ie. 512 byte offset) */
+ __virtio64 sector;
+};
+
+#ifndef VIRTIO_BLK_NO_LEGACY
+struct virtio_scsi_inhdr {
+ __virtio32 errors;
+ __virtio32 data_len;
+ __virtio32 sense_len;
+ __virtio32 residual;
+};
+#endif /* !VIRTIO_BLK_NO_LEGACY */
+
+/* And this is the final byte of the write scatter-gather list */
+#define VIRTIO_BLK_S_OK 0
+#define VIRTIO_BLK_S_IOERR 1
+#define VIRTIO_BLK_S_UNSUPP 2
+
+#endif /* _LINUX_VIRTIO_BLK_H */
--
2.7.4
More information about the U-Boot
mailing list