[U-Boot] [PATCH] power: regulator: Makefile: Remove SPL tag for REGULATOR_GPIO

[Lokesh Vutla]

On Wednesday 17 October 2018 04:15 PM, Lokesh Vutla wrote:
> From: Keerthy <j-keerthy at ti.com>
> 
> There is no SPL specific Kconfig symbol defined for DM_REGULATOR_GPIO but
> Makefile uses a SPL tag for building gpio-regulator. This makes
> gpio-regulator can never be built for SPL. Fix it by dropping the
> SPL tag in Makefile. CONFIG_SPL_POWER_SUPPORT is used for including
> regulator support in SPL.
> 
> Signed-off-by: Keerthy <j-keerthy at ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>

This is breaking omap3_logic defconfig as DM_REGULATOR_GPIO is selected for SPL 
but SPL_GPIO support is not enabled. We should add a Kconfig symbol for fixing 
it. Will repost the patch.

Thanks and regards,
Lokesh

> ---
>   drivers/power/regulator/Makefile | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
> index 16208af069..ba71504f8c 100644
> --- a/drivers/power/regulator/Makefile
> +++ b/drivers/power/regulator/Makefile
> @@ -12,7 +12,7 @@ obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
>   obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
>   obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o
>   obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o
> -obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o
> +obj-$(CONFIG_DM_REGULATOR_GPIO) += gpio-regulator.o
>   obj-$(CONFIG_REGULATOR_RK8XX) += rk8xx.o
>   obj-$(CONFIG_DM_REGULATOR_S2MPS11) += s2mps11_regulator.o
>   obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
>