[U-Boot] [PATCH 03/20] arm: MediaTek: add basic support for MT7623 boards

[Ryder Lee]

     1. On Tue, 2018-10-02 at 16:27 +0200, Matthias Brugger wrote:
> mt7623_rfb
> 
> On 02/10/2018 08:13, Ryder Lee wrote:
> > From: Weijie Gao <weijie.gao at mediatek.com>
> > 
> > This adds a general board file based on MT7623 SoCs from MediaTek.
> > 
> > As this u-boot is loaded by preloader, there is no low level
> > initializtion codes.
> > 
> > Signed-off-by: Weijie Gao <weijie.gao at mediatek.com>
> > ---
> >  arch/arm/mach-mediatek/Kconfig                |  8 +++
> >  arch/arm/mach-mediatek/Makefile               |  1 +
> >  arch/arm/mach-mediatek/mt7623/Makefile        |  4 ++
> >  arch/arm/mach-mediatek/mt7623/init.c          | 53 ++++++++++++++
> >  arch/arm/mach-mediatek/mt7623/lowlevel_init.S | 22 ++++++
> >  arch/arm/mach-mediatek/mt7623/preloader.h     | 99 +++++++++++++++++++++++++++
> >  board/mediatek/mt7623/Kconfig                 | 13 ++++
> >  board/mediatek/mt7623/MAINTAINERS             |  7 ++
> >  board/mediatek/mt7623/Makefile                |  4 ++
> >  board/mediatek/mt7623/mt7623_rfb.c            | 16 +++++
> >  include/configs/mt7623.h                      | 66 ++++++++++++++++++
> >  11 files changed, 293 insertions(+)
> >  create mode 100644 arch/arm/mach-mediatek/mt7623/Makefile
> >  create mode 100644 arch/arm/mach-mediatek/mt7623/init.c
> >  create mode 100644 arch/arm/mach-mediatek/mt7623/lowlevel_init.S
> >  create mode 100644 arch/arm/mach-mediatek/mt7623/preloader.h
> >  create mode 100644 board/mediatek/mt7623/Kconfig
> >  create mode 100644 board/mediatek/mt7623/MAINTAINERS
> >  create mode 100644 board/mediatek/mt7623/Makefile
> >  create mode 100644 board/mediatek/mt7623/mt7623_rfb.c
> >  create mode 100644 include/configs/mt7623.h
> > 
> [...]
> > diff --git a/board/mediatek/mt7623/Makefile b/board/mediatek/mt7623/Makefile
> > new file mode 100644
> > index 0000000..8943111
> > --- /dev/null
> > +++ b/board/mediatek/mt7623/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier:	GPL-2.0+
> > +
> > +obj-y += mt7623_rfb.o
> > +
> 
> as we are with nitpicks:
> new blank line at EOF
> 

Will fix new blank line here and there.

Thanks,
Ryder