[U-Boot] [PATCH v2 5/7] driver: net: ti: introduce common mdio support library
Grygorii Strashko
grygorii.strashko at ti.com
Wed Oct 31 19:06:43 UTC 2018
All existing TI SoCs network HW have similar MDIO implementation, so
introduce common mdio support library which can be reused by TI networking
drivers.
Reviewed-by: Tom Rini <trini at konsulko.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko at ti.com>
---
drivers/net/ti/Makefile | 2 +-
drivers/net/ti/cpsw_mdio.c | 201 +++++++++++++++++++++++++++++++++++++++++++++
drivers/net/ti/cpsw_mdio.h | 18 ++++
3 files changed, 220 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ti/cpsw_mdio.c
create mode 100644 drivers/net/ti/cpsw_mdio.h
diff --git a/drivers/net/ti/Makefile b/drivers/net/ti/Makefile
index 4ab4a27..d2b6f20 100644
--- a/drivers/net/ti/Makefile
+++ b/drivers/net/ti/Makefile
@@ -2,6 +2,6 @@
#
# Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
-obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o
+obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o cpsw-common.o cpsw_mdio.o
obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
diff --git a/drivers/net/ti/cpsw_mdio.c b/drivers/net/ti/cpsw_mdio.c
new file mode 100644
index 0000000..f4211b7
--- /dev/null
+++ b/drivers/net/ti/cpsw_mdio.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * CPSW MDIO generic driver for TI AMxx/K2x/EMAC devices.
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <wait_bit.h>
+
+struct cpsw_mdio_regs {
+ u32 version;
+ u32 control;
+#define CONTROL_IDLE BIT(31)
+#define CONTROL_ENABLE BIT(30)
+#define CONTROL_FAULT BIT(19)
+#define CONTROL_FAULT_ENABLE BIT(18)
+#define CONTROL_DIV_MASK GENMASK(15, 0)
+
+ u32 alive;
+ u32 link;
+ u32 linkintraw;
+ u32 linkintmasked;
+ u32 __reserved_0[2];
+ u32 userintraw;
+ u32 userintmasked;
+ u32 userintmaskset;
+ u32 userintmaskclr;
+ u32 __reserved_1[20];
+
+ struct {
+ u32 access;
+ u32 physel;
+#define USERACCESS_GO BIT(31)
+#define USERACCESS_WRITE BIT(30)
+#define USERACCESS_ACK BIT(29)
+#define USERACCESS_READ (0)
+#define USERACCESS_PHY_REG_SHIFT (21)
+#define USERACCESS_PHY_ADDR_SHIFT (16)
+#define USERACCESS_DATA GENMASK(15, 0)
+ } user[0];
+};
+
+#define CPSW_MDIO_DIV_DEF 0xff
+#define PHY_REG_MASK 0x1f
+#define PHY_ID_MASK 0x1f
+
+/*
+ * This timeout definition is a worst-case ultra defensive measure against
+ * unexpected controller lock ups. Ideally, we should never ever hit this
+ * scenario in practice.
+ */
+#define CPSW_MDIO_TIMEOUT 100 /* msecs */
+
+struct cpsw_mdio {
+ struct cpsw_mdio_regs *regs;
+ struct mii_dev *bus;
+ int div;
+};
+
+/* wait until hardware is ready for another user access */
+static inline u32 cpsw_mdio_wait_for_user_access(struct cpsw_mdio *mdio)
+{
+ int ret;
+
+ ret = wait_for_bit_le32(&mdio->regs->user[0].access,
+ USERACCESS_GO, false, CPSW_MDIO_TIMEOUT, false);
+ if (ret)
+ return ret;
+
+ return readl(&mdio->regs->user[0].access);
+}
+
+static int cpsw_mdio_read(struct mii_dev *bus, int phy_id,
+ int dev_addr, int phy_reg)
+{
+ struct cpsw_mdio *mdio = bus->priv;
+ int data;
+ u32 reg;
+
+ if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
+ return -EINVAL;
+
+ cpsw_mdio_wait_for_user_access(mdio);
+ reg = (USERACCESS_GO | USERACCESS_READ |
+ (phy_reg << USERACCESS_PHY_REG_SHIFT) |
+ (phy_id << USERACCESS_PHY_ADDR_SHIFT));
+ writel(reg, &mdio->regs->user[0].access);
+ reg = cpsw_mdio_wait_for_user_access(mdio);
+
+ data = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -1;
+ return data;
+}
+
+static int cpsw_mdio_write(struct mii_dev *bus, int phy_id, int dev_addr,
+ int phy_reg, u16 data)
+{
+ struct cpsw_mdio *mdio = bus->priv;
+ u32 reg;
+
+ if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
+ return -EINVAL;
+
+ cpsw_mdio_wait_for_user_access(mdio);
+ reg = (USERACCESS_GO | USERACCESS_WRITE |
+ (phy_reg << USERACCESS_PHY_REG_SHIFT) |
+ (phy_id << USERACCESS_PHY_ADDR_SHIFT) |
+ (data & USERACCESS_DATA));
+ writel(reg, &mdio->regs->user[0].access);
+ cpsw_mdio_wait_for_user_access(mdio);
+
+ return 0;
+}
+
+u32 cpsw_mdio_get_alive(struct mii_dev *bus)
+{
+ struct cpsw_mdio *mdio = bus->priv;
+ u32 val;
+
+ val = readl(&mdio->regs->control);
+ return val & GENMASK(15, 0);
+}
+
+struct mii_dev *cpsw_mdio_init(const char *name, u32 mdio_base,
+ u32 bus_freq, int fck_freq)
+{
+ struct cpsw_mdio *cpsw_mdio;
+ int ret;
+
+ cpsw_mdio = calloc(1, sizeof(*cpsw_mdio));
+ if (!cpsw_mdio) {
+ debug("failed to alloc cpsw_mdio\n");
+ return NULL;
+ }
+
+ cpsw_mdio->bus = mdio_alloc();
+ if (!cpsw_mdio->bus) {
+ debug("failed to alloc mii bus\n");
+ free(cpsw_mdio);
+ return NULL;
+ }
+
+ cpsw_mdio->regs = (struct cpsw_mdio_regs *)mdio_base;
+
+ if (!bus_freq || !fck_freq)
+ cpsw_mdio->div = CPSW_MDIO_DIV_DEF;
+ else
+ cpsw_mdio->div = (fck_freq / bus_freq) - 1;
+ cpsw_mdio->div &= CONTROL_DIV_MASK;
+
+ /* set enable and clock divider */
+ writel(cpsw_mdio->div | CONTROL_ENABLE | CONTROL_FAULT |
+ CONTROL_FAULT_ENABLE, &cpsw_mdio->regs->control);
+ wait_for_bit_le32(&cpsw_mdio->regs->control,
+ CONTROL_IDLE, false, CPSW_MDIO_TIMEOUT, true);
+
+ /*
+ * wait for scan logic to settle:
+ * the scan time consists of (a) a large fixed component, and (b) a
+ * small component that varies with the mii bus frequency. These
+ * were estimated using measurements at 1.1 and 2.2 MHz on tnetv107x
+ * silicon. Since the effect of (b) was found to be largely
+ * negligible, we keep things simple here.
+ */
+ mdelay(1);
+
+ cpsw_mdio->bus->read = cpsw_mdio_read;
+ cpsw_mdio->bus->write = cpsw_mdio_write;
+ cpsw_mdio->bus->priv = cpsw_mdio;
+ snprintf(cpsw_mdio->bus->name, sizeof(cpsw_mdio->bus->name), name);
+
+ ret = mdio_register(cpsw_mdio->bus);
+ if (ret < 0) {
+ debug("failed to register mii bus\n");
+ goto free_bus;
+ }
+
+ return cpsw_mdio->bus;
+
+free_bus:
+ mdio_free(cpsw_mdio->bus);
+ free(cpsw_mdio);
+ return NULL;
+}
+
+void cpsw_mdio_free(struct mii_dev *bus)
+{
+ struct cpsw_mdio *mdio = bus->priv;
+ u32 reg;
+
+ /* disable mdio */
+ reg = readl(&mdio->regs->control);
+ reg &= ~CONTROL_ENABLE;
+ writel(reg, &mdio->regs->control);
+
+ mdio_unregister(bus);
+ mdio_free(bus);
+ free(mdio);
+}
diff --git a/drivers/net/ti/cpsw_mdio.h b/drivers/net/ti/cpsw_mdio.h
new file mode 100644
index 0000000..4a76d4e
--- /dev/null
+++ b/drivers/net/ti/cpsw_mdio.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * CPSW MDIO generic driver API for TI AMxx/K2x/EMAC devices.
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#ifndef CPSW_MDIO_H_
+#define CPSW_MDIO_H_
+
+struct cpsw_mdio;
+
+struct mii_dev *cpsw_mdio_init(const char *name, u32 mdio_base,
+ u32 bus_freq, int fck_freq);
+void cpsw_mdio_free(struct mii_dev *bus);
+u32 cpsw_mdio_get_alive(struct mii_dev *bus);
+
+#endif /* CPSW_MDIO_H_ */
--
2.10.5
More information about the U-Boot
mailing list