[U-Boot] [PATCH v2 2/2] watchdog: imx: add config to disable wdog reset

[Xiaoliang Yang]

Add Kconfig option WATCHDOG_RESET_DISABLE to disable watchdog reset
in imx_watchdog driver, so that the watchdog will not be fed in
u-boot if CONFIG_WATCHDOG_RESET_DISABLE is enabled.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1 at nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 |    2 ++
 drivers/watchdog/Kconfig                           |    6 ++++++
 drivers/watchdog/imx_watchdog.c                    |    2 ++
 3 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2
index 9176546..9583bf7 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2
@@ -17,3 +17,5 @@ Use following config to set watchdog timeout, if this config is not defined,
 the default timeout value is 128s which is the maximum. Set 10 seconds for
 example:
     #define CONFIG_WATCHDOG_TIMEOUT_MSECS 10000
+Set CONFIG_WATCHDOG_RESET_DISABLE to disable reset watchdog, so that the
+watchdog will not be fed in u-boot.
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index d545b3e..d5dbc80 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -11,6 +11,12 @@ config WATCHDOG
 config HW_WATCHDOG
 	bool
 
+config WATCHDOG_RESET_DISABLE
+	bool "Disable reset watchdog"
+	help
+	   Disable reset watchdog, which can let WATCHDOG_RESET invalid, so
+	   that the watchdog will not be fed in u-boot.
+
 config BCM2835_WDT
 	bool "Enable BCM2835/2836 watchdog driver"
 	select HW_WATCHDOG
diff --git a/drivers/watchdog/imx_watchdog.c b/drivers/watchdog/imx_watchdog.c
index ddcf474..14cc618 100644
--- a/drivers/watchdog/imx_watchdog.c
+++ b/drivers/watchdog/imx_watchdog.c
@@ -16,10 +16,12 @@
 #ifdef CONFIG_IMX_WATCHDOG
 void hw_watchdog_reset(void)
 {
+#ifndef CONFIG_WATCHDOG_RESET_DISABLE
 	struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
 
 	writew(0x5555, &wdog->wsr);
 	writew(0xaaaa, &wdog->wsr);
+#endif /* CONFIG_WATCHDOG_RESET_DISABLE*/
 }
 
 void hw_watchdog_init(void)
-- 
1.7.1