[U-Boot] [PATCH v2] armv8: lx2160aqds : Add support for LX2160AQDS platform
Pankaj Bansal
pankaj.bansal at nxp.com
Mon Oct 29 11:32:11 UTC 2018
LX2160AQDS is a development board that supports LX2160A
family SoCs. This patch add base support for this board.
Signed-off-by: Wasim Khan <wasim.khan at nxp.com>
Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal at nxp.com>
---
Notes:
This patch depends on following patches:
[1] https://patchwork.ozlabs.org/patch/970926/
[2] https://patchwork.ozlabs.org/patch/970927/
[3] https://patchwork.ozlabs.org/patch/983917/
V2:
- removed checkpatch warnings about line over 80 chars
- Added CONFIG_FSL_MC_ENET macro in eth_lx2160aqds.c file
to avoid compilation errors if this macro is not defined
V1:
The checkpatch script reported 28 warnings about line over 80
characters, that i have not corrected. as IMO doing so, makes
the code less legible.
arch/arm/Kconfig | 13 +
arch/arm/cpu/armv8/Kconfig | 1 +
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/fsl-lx2160a-qds.dts | 126 +++
.../asm/arch-fsl-layerscape/immap_lsch3.h | 8 +
board/freescale/lx2160a/Kconfig | 17 +
board/freescale/lx2160a/MAINTAINERS | 9 +
board/freescale/lx2160a/Makefile | 1 +
board/freescale/lx2160a/README | 83 ++
board/freescale/lx2160a/eth_lx2160aqds.c | 787 +++++++++++++++++
board/freescale/lx2160a/lx2160a.c | 280 +++++-
configs/lx2160aqds_tfa_defconfig | 74 ++
include/configs/lx2160aqds.h | 111 +++
13 files changed, 1511 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a76678d5d8..a8e274e88c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1032,6 +1032,19 @@ config TARGET_LX2160ARDB
is a high-performance development platform that supports the
QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
+config TARGET_LX2160AQDS
+ bool "Support lx2160aqds"
+ select ARCH_LX2160A
+ select ARCH_MISC_INIT
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select BOARD_LATE_INIT
+ help
+ Support for NXP LX2160AQDS platform.
+ The lx2160aqds (LX2160A QorIQ Development System (QDS)
+ is a high-performance development platform that supports the
+ QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
+
config TARGET_HIKEY
bool "Support HiKey 96boards Consumer Edition Platform"
select ARM64
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index aac3aebb44..7dff2f8910 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -106,6 +106,7 @@ config PSCI_RESET
!TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
!TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
!TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \
+ !TARGET_LX2160AQDS && \
!ARCH_UNIPHIER && !TARGET_S32V234EVB
help
Most armv8 systems have PSCI support enabled in EL3, either through
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 167397c8d9..a8aeec4a10 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -227,7 +227,8 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
fsl-ls2088a-rdb-qspi.dtb \
fsl-ls1088a-rdb.dtb \
fsl-ls1088a-qds.dtb \
- fsl-lx2160a-rdb.dtb
+ fsl-lx2160a-rdb.dtb \
+ fsl-lx2160a-qds.dtb
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
fsl-ls1043a-qds-lpuart.dtb \
fsl-ls1043a-rdb.dtb \
diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts
new file mode 100644
index 0000000000..1a355d4616
--- /dev/null
+++ b/arch/arm/dts/fsl-lx2160a-qds.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LX2160ARDB device tree source
+ *
+ * Author: Priyanka Jain <priyanka.jain at nxp.com>
+ * Sriram Dash <sriram.dash at nxp.com>
+ *
+ * Copyright 2018 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+ model = "NXP Layerscape LX2160AQDS Board";
+ compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+
+ aliases {
+ spi0 = &dspi0;
+ spi1 = &dspi1;
+ spi2 = &dspi2;
+ };
+
+};
+
+&dspi0 {
+ bus-num = <0>;
+ status = "okay";
+
+ dflash0: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+ dflash1: sst25wf040b {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <1>;
+ };
+ dflash2: en25s64 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <2>;
+ };
+};
+
+&dspi1 {
+ bus-num = <0>;
+ status = "okay";
+
+ dflash3: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+ dflash4: sst25wf040b {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <1>;
+ };
+ dflash5: en25s64 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <2>;
+ };
+};
+
+&dspi2 {
+ bus-num = <0>;
+ status = "okay";
+
+ dflash6: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+ dflash7: sst25wf040b {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <1>;
+ };
+ dflash8: en25s64 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <2>;
+ };
+};
+
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 875467b43b..7872b2e3b8 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -354,6 +354,14 @@ struct ccsr_gur {
#define FSL_CHASSIS3_SRDS1_REGSR 29
#define FSL_CHASSIS3_SRDS2_REGSR 29
#define FSL_CHASSIS3_SRDS3_REGSR 29
+#define FSL_CHASSIS3_RCWSR12_REGSR 12
+#define FSL_CHASSIS3_RCWSR13_REGSR 13
+#define FSL_CHASSIS3_SDHC1_BASE_PMUX_MASK 0x07000000
+#define FSL_CHASSIS3_SDHC1_BASE_PMUX_SHIFT 24
+#define FSL_CHASSIS3_SDHC2_BASE_PMUX_MASK 0x00000038
+#define FSL_CHASSIS3_SDHC2_BASE_PMUX_SHIFT 3
+#define FSL_CHASSIS3_IIC5_PMUX_MASK 0x00000E00
+#define FSL_CHASSIS3_IIC5_PMUX_SHIFT 9
#elif defined(CONFIG_ARCH_LS1088A)
#define FSL_CHASSIS3_EC1_REGSR 26
#define FSL_CHASSIS3_EC2_REGSR 26
diff --git a/board/freescale/lx2160a/Kconfig b/board/freescale/lx2160a/Kconfig
index 5562c3ec45..42778d26f0 100644
--- a/board/freescale/lx2160a/Kconfig
+++ b/board/freescale/lx2160a/Kconfig
@@ -14,3 +14,20 @@ config SYS_CONFIG_NAME
source "board/freescale/common/Kconfig"
endif
+
+if TARGET_LX2160AQDS
+
+config SYS_BOARD
+ default "lx2160a"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+ default "lx2160aqds"
+
+source "board/freescale/common/Kconfig"
+endif
diff --git a/board/freescale/lx2160a/MAINTAINERS b/board/freescale/lx2160a/MAINTAINERS
index b4dd842afc..07c5f07959 100644
--- a/board/freescale/lx2160a/MAINTAINERS
+++ b/board/freescale/lx2160a/MAINTAINERS
@@ -6,3 +6,12 @@ F: include/configs/lx2160a_common.h
F: include/configs/lx2160ardb.h
F: configs/lx2160ardb_defconfig
F: arch/arm/dts/fsl-lx2160a-rdb.dts
+
+LX2160AQDS BOARD
+M: Pankaj Bansal <pankaj.bansal at nxp.com>
+S: Maintained
+F: board/freescale/lx2160a/
+F: board/freescale/lx2160a/eth_lx2160aqds.c
+F: include/configs/lx2160aqds.h
+F: configs/lx2160aqds_defconfig
+F: arch/arm/dts/fsl-lx2160a-qds.dts
diff --git a/board/freescale/lx2160a/Makefile b/board/freescale/lx2160a/Makefile
index be3709d449..d1a621b682 100644
--- a/board/freescale/lx2160a/Makefile
+++ b/board/freescale/lx2160a/Makefile
@@ -7,3 +7,4 @@
obj-y += lx2160a.o
obj-y += ddr.o
obj-$(CONFIG_TARGET_LX2160ARDB) += eth_lx2160ardb.o
+obj-$(CONFIG_TARGET_LX2160AQDS) += eth_lx2160aqds.o
diff --git a/board/freescale/lx2160a/README b/board/freescale/lx2160a/README
index 5b99de8937..2f7ea5bf23 100644
--- a/board/freescale/lx2160a/README
+++ b/board/freescale/lx2160a/README
@@ -77,3 +77,86 @@ DPAA2 MC Firmware 0x05000
DPAA2 DPL 0x06800
DPAA2 DPC 0x07000
Kernel.itb 0x08000
+
+LX2160AQDS board Overview
+----------------------
+Various Mezzanine cards and their connection for different SERDES protocols is
+as below:
+
+SERDES1 |CARDS
+-----------------------------------------------------------------------
+1 |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
+ |Connect I/O cable to IO_SLOT1(J110)
+ |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
+ |Connect I/O cable to IO_SLOT2(J113)
+------------------------------------------------------------------------
+3 |Mezzanine:X-M11-USXGMII (29828)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
+ |Connect I/O cable to IO_SLOT1(J110)
+ |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
+ |Connect I/O cable to IO_SLOT2(J113)
+------------------------------------------------------------------------
+7 |Mezzanine:X-M11-USXGMII (29828)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
+ |Connect I/O cable to IO_SLOT1(J110)
+ |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
+ |Connect I/O cable to IO_SLOT2(J113)
+------------------------------------------------------------------------
+13 |Mezzanine:X-M8-100G (29734)
+ |Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
+ |Connect I/O cable to IO_SLOT1(J110)
+ |Mezzanine:X-M8-100G (29734)
+ |Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT2(J111)
+ |Connect I/O cable to IO_SLOT2(J113)
+------------------------------------------------------------------------
+15 |Mezzanine:X-M8-100G (29734)
+ |Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
+ |Connect I/O cable to IO_SLOT1(J110)
+ |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
+ |Connect I/O cable to IO_SLOT2(J113)
+------------------------------------------------------------------------
+19 |Mezzanine:X-M11-USXGMII (29828), X-M13-25G (32133)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
+ |Connect M11 I/O cable to IO_SLOT1(J110), M13 I/O cable to IO_SLOT6(J125)
+ |Mezzanine:X-M7-40G (29738)
+ |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT2 (J111)
+ |Connect I/O cable to IO_SLOT2(J113)
+------------------------------------------------------------------------
+
+
+SERDES2 |CARDS
+-----------------------------------------------------------------------
+2 |Mezzanine:X-M6-PCIE-X8 (29737) *
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
+ |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT4 (J117)
+ |Connect I/O cable to IO_SLOT3(J116)
+------------------------------------------------------------------------
+3 |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
+ |Connect I/O cable to IO_SLOT3(J116)
+ |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
+ |Connect I/O cable to IO_SLOT4(J119)
+------------------------------------------------------------------------
+5 |Mezzanine:X-M4-PCIE-SGMII (29733)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
+ |Connect I/O cable to IO_SLOT3(J116)
+ |Mezzanine:X-M5-SATA (29687)
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
+ |Connect I/O cable to IO_SLOT4(J119)
+------------------------------------------------------------------------
+
+
+SERDES3 |CARDS
+-----------------------------------------------------------------------
+2 |Mezzanine:X-M6-PCIE-X8 (29737) *
+ |Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT5 (J120)
+ |Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT6 (J123)
+ |Connect I/O cable to IO_SLOT5(J122)
+-------------------------------------------------------------------------
+
diff --git a/board/freescale/lx2160a/eth_lx2160aqds.c b/board/freescale/lx2160a/eth_lx2160aqds.c
new file mode 100644
index 0000000000..032b7ef8cc
--- /dev/null
+++ b/board/freescale/lx2160a/eth_lx2160aqds.c
@@ -0,0 +1,787 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ *
+ */
+
+#include <common.h>
+#include <hwconfig.h>
+#include <command.h>
+#include <netdev.h>
+#include <malloc.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <exports.h>
+#include <asm/arch/fsl_serdes.h>
+#include <fsl-mc/fsl_mc.h>
+#include <fsl-mc/ldpaa_wriop.h>
+
+#include "../common/qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define EMI_NONE 0
+#define EMI1 1 /* Mdio Bus 1 */
+#define EMI2 2 /* Mdio Bus 2 */
+
+#if defined(CONFIG_FSL_MC_ENET)
+enum io_slot {
+ IO_SLOT_NONE = 0,
+ IO_SLOT_1,
+ IO_SLOT_2,
+ IO_SLOT_3,
+ IO_SLOT_4,
+ IO_SLOT_5,
+ IO_SLOT_6,
+ IO_SLOT_7,
+ IO_SLOT_8,
+ EMI1_RGMII1,
+ EMI1_RGMII2,
+ IO_SLOT_MAX
+};
+
+struct lx2160a_qds_mdio {
+ enum io_slot ioslot : 4;
+ u8 realbusnum : 4;
+ struct mii_dev *realbus;
+};
+
+/* structure explaining the phy configuration on 8 lanes of a serdes*/
+struct serdes_phy_config {
+ u8 serdes; /* serdes protocol */
+ struct phy_config {
+ u8 dpmacid;
+ /* -1 terminated array */
+ int phy_address[WRIOP_MAX_PHY_NUM + 1];
+ u8 mdio_bus;
+ enum io_slot ioslot;
+ } phy_config[SRDS_MAX_LANES];
+};
+
+/* Table defining the phy configuration on 8 lanes of a serdes.
+ * Various assumptions have been made while defining this table.
+ * e.g. for serdes1 protocol 19 it is being assumed that X-M11-USXGMII
+ * card is being used for dpmac 3-4. (X-M12-XFI could also have been used)
+ * And also that this card is connected to IO Slot 1 (could have been connected
+ * to any of the 8 IO slots (IO slot 1 - IO slot 8)).
+ * similarly, it is also being assumed that MDIO 1 is selected on X-M7-40G card
+ * used in serdes1 protocol 19 (could have selected MDIO 2)
+ * To override these settings "dpmac" environment variable can be used after
+ * defining "dpmac_override" in hwconfig environment variable.
+ * This table has limited serdes protocol entries. It can be expanded as per
+ * requirement.
+ */
+static const struct serdes_phy_config serdes1_phy_config[] = {
+ {3, {{WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC5, {AQ_PHY_ADDR3, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC6, {AQ_PHY_ADDR4, -1},
+ EMI1, IO_SLOT_1} } },
+ {7, {{WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC5, {AQ_PHY_ADDR3, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC6, {AQ_PHY_ADDR4, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC7, {SGMII_CARD_PORT1_PHY_ADDR, -1},
+ EMI1, IO_SLOT_2},
+ {WRIOP1_DPMAC8, {SGMII_CARD_PORT2_PHY_ADDR, -1},
+ EMI1, IO_SLOT_2},
+ {WRIOP1_DPMAC9, {SGMII_CARD_PORT3_PHY_ADDR, -1},
+ EMI1, IO_SLOT_2},
+ {WRIOP1_DPMAC10, {SGMII_CARD_PORT4_PHY_ADDR, -1},
+ EMI1, IO_SLOT_2} } },
+ {8, {} },
+ {13, {{WRIOP1_DPMAC1, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC2, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_2} } },
+ {15, {{WRIOP1_DPMAC1, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC2, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_1} } },
+ {17, {{WRIOP1_DPMAC3, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC4, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC5, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC6, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_1} } },
+ {19, {{WRIOP1_DPMAC2, {CORTINA_PHY_ADDR1, -1},
+ EMI1, IO_SLOT_2},
+ {WRIOP1_DPMAC3, {AQ_PHY_ADDR1, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC4, {AQ_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC5, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_6},
+ {WRIOP1_DPMAC6, {INPHI_PHY_ADDR1, INPHI_PHY_ADDR2, -1},
+ EMI1, IO_SLOT_6} } },
+ {20, {{WRIOP1_DPMAC1, {CORTINA_PHY_ADDR1, -1},
+ EMI1, IO_SLOT_1},
+ {WRIOP1_DPMAC2, {CORTINA_PHY_ADDR1, -1},
+ EMI1, IO_SLOT_2} } }
+};
+
+static const struct serdes_phy_config serdes2_phy_config[] = {
+ {2, {} },
+ {3, {} },
+ {5, {} },
+ {11, {{WRIOP1_DPMAC12, {SGMII_CARD_PORT2_PHY_ADDR, -1},
+ EMI1, IO_SLOT_7},
+ {WRIOP1_DPMAC17, {SGMII_CARD_PORT3_PHY_ADDR, -1},
+ EMI1, IO_SLOT_7},
+ {WRIOP1_DPMAC18, {SGMII_CARD_PORT4_PHY_ADDR, -1},
+ EMI1, IO_SLOT_7},
+ {WRIOP1_DPMAC16, {SGMII_CARD_PORT2_PHY_ADDR, -1},
+ EMI1, IO_SLOT_8},
+ {WRIOP1_DPMAC13, {SGMII_CARD_PORT3_PHY_ADDR, -1},
+ EMI1, IO_SLOT_8},
+ {WRIOP1_DPMAC14, {SGMII_CARD_PORT4_PHY_ADDR, -1},
+ EMI1, IO_SLOT_8} } },
+};
+
+static const struct serdes_phy_config serdes3_phy_config[] = {
+ {2, {} },
+ {3, {} }
+};
+
+static
+inline
+const
+struct phy_config *get_phy_config(u8 serdes,
+ const struct serdes_phy_config *table,
+ u8 table_size)
+{
+ int i;
+
+ for (i = 0; i < table_size; i++) {
+ if (table[i].serdes == serdes)
+ return table[i].phy_config;
+ }
+
+ return NULL;
+}
+
+/* BRDCFG4 controls EMI routing for the board.
+ * Bits Function
+ * 7-6 EMI Interface #1 Primary Routing (CFG_MUX1_EMI1) (1.8V):
+ * EMI1 00= On-board PHY #1
+ * 01= On-board PHY #2
+ * 10= (reserved)
+ * 11= Slots 1..8 multiplexer and translator.
+ * 5-3 EMI Interface #1 Secondary Routing (CFG_MUX2_EMI1) (2.5V):
+ * EMI1X 000= Slot #1
+ * 001= Slot #2
+ * 010= Slot #3
+ * 011= Slot #4
+ * 100= Slot #5
+ * 101= Slot #6
+ * 110= Slot #7
+ * 111= Slot #8
+ * 2-0 EMI Interface #2 Routing (CFG_MUX_EMI2):
+ * EMI2 000= Slot #1 (secondary EMI)
+ * 001= Slot #2 (secondary EMI)
+ * 010= Slot #3 (secondary EMI)
+ * 011= Slot #4 (secondary EMI)
+ * 100= Slot #5 (secondary EMI)
+ * 101= Slot #6 (secondary EMI)
+ * 110= Slot #7 (secondary EMI)
+ * 111= Slot #8 (secondary EMI)
+ */
+static void lx2160a_qds_mux_mdio(struct lx2160a_qds_mdio *priv)
+{
+ u8 brdcfg4, reg;
+
+ brdcfg4 = QIXIS_READ(brdcfg[4]);
+ reg = brdcfg4;
+
+ switch (priv->realbusnum) {
+ case EMI1:
+ switch (priv->ioslot) {
+ case EMI1_RGMII1:
+ brdcfg4 &= ~0xC0;
+ break;
+ case EMI1_RGMII2:
+ brdcfg4 &= ~0xC0;
+ brdcfg4 |= 1U << 6;
+ break;
+ default:
+ brdcfg4 |= 3U << 6;
+ brdcfg4 &= ~BRDCFG4_EMI1SEL_MASK;
+ brdcfg4 |= (priv->ioslot - 1) << BRDCFG4_EMI1SEL_SHIFT;
+ break;
+ }
+ break;
+ case EMI2:
+ brdcfg4 &= ~BRDCFG4_EMI2SEL_MASK;
+ brdcfg4 |= (priv->ioslot - 1) << BRDCFG4_EMI2SEL_SHIFT;
+ break;
+ }
+
+ if (brdcfg4 ^ reg)
+ QIXIS_WRITE(brdcfg[4], brdcfg4);
+}
+
+static int lx2160a_qds_mdio_read(struct mii_dev *bus, int addr,
+ int devad, int regnum)
+{
+ struct lx2160a_qds_mdio *priv = bus->priv;
+
+ lx2160a_qds_mux_mdio(priv);
+
+ return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int lx2160a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int regnum, u16 value)
+{
+ struct lx2160a_qds_mdio *priv = bus->priv;
+
+ lx2160a_qds_mux_mdio(priv);
+
+ return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int lx2160a_qds_mdio_reset(struct mii_dev *bus)
+{
+ struct lx2160a_qds_mdio *priv = bus->priv;
+
+ return priv->realbus->reset(priv->realbus);
+}
+
+static struct mii_dev *lx2160a_qds_mdio_init(u8 realbusnum, enum io_slot ioslot)
+{
+ struct lx2160a_qds_mdio *pmdio;
+ struct mii_dev *bus;
+ /*should be within MDIO_NAME_LEN*/
+ char dummy_mdio_name[] = "LX2160A_QDS_MDIO1_IOSLOT1";
+
+ if (realbusnum == EMI2) {
+ if (ioslot < IO_SLOT_1 || ioslot > IO_SLOT_8) {
+ printf("invalid ioslot %d\n", ioslot);
+ return NULL;
+ }
+ } else if (realbusnum == EMI1) {
+ if (ioslot < IO_SLOT_1 || ioslot > EMI1_RGMII2) {
+ printf("invalid ioslot %d\n", ioslot);
+ return NULL;
+ }
+ } else {
+ printf("not supported real mdio bus %d\n", realbusnum);
+ return NULL;
+ }
+
+ if (ioslot == EMI1_RGMII1)
+ strcpy(dummy_mdio_name, "LX2160A_QDS_MDIO1_RGMII1");
+ else if (ioslot == EMI1_RGMII2)
+ strcpy(dummy_mdio_name, "LX2160A_QDS_MDIO1_RGMII2");
+ else
+ sprintf(dummy_mdio_name, "LX2160A_QDS_MDIO%d_IOSLOT%d",
+ realbusnum, ioslot);
+ bus = miiphy_get_dev_by_name(dummy_mdio_name);
+
+ if (bus)
+ return bus;
+
+ bus = mdio_alloc();
+ if (!bus) {
+ printf("Failed to allocate %s bus\n", dummy_mdio_name);
+ return NULL;
+ }
+
+ pmdio = malloc(sizeof(*pmdio));
+ if (!pmdio) {
+ printf("Failed to allocate %s private data\n", dummy_mdio_name);
+ free(bus);
+ return NULL;
+ }
+
+ switch (realbusnum) {
+ case EMI1:
+ pmdio->realbus =
+ miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
+ break;
+ case EMI2:
+ pmdio->realbus =
+ miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
+ break;
+ }
+
+ if (!pmdio->realbus) {
+ printf("No real mdio bus num %d found\n", realbusnum);
+ free(bus);
+ free(pmdio);
+ return NULL;
+ }
+
+ pmdio->realbusnum = realbusnum;
+ pmdio->ioslot = ioslot;
+ bus->read = lx2160a_qds_mdio_read;
+ bus->write = lx2160a_qds_mdio_write;
+ bus->reset = lx2160a_qds_mdio_reset;
+ strcpy(bus->name, dummy_mdio_name);
+ bus->priv = pmdio;
+
+ if (!mdio_register(bus))
+ return bus;
+
+ printf("No bus with name %s\n", dummy_mdio_name);
+ free(bus);
+ free(pmdio);
+ return NULL;
+}
+
+static inline void do_phy_config(const struct phy_config *phy_config)
+{
+ struct mii_dev *bus;
+ int i, phy_num, phy_address;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (!phy_config[i].dpmacid)
+ continue;
+
+ for (phy_num = 0;
+ phy_num < ARRAY_SIZE(phy_config[i].phy_address);
+ phy_num++) {
+ phy_address = phy_config[i].phy_address[phy_num];
+ if (phy_address == -1)
+ break;
+ wriop_set_phy_address(phy_config[i].dpmacid,
+ phy_num, phy_address);
+ }
+ /*Register the muxing front-ends to the MDIO buses*/
+ bus = lx2160a_qds_mdio_init(phy_config[i].mdio_bus,
+ phy_config[i].ioslot);
+ if (!bus)
+ printf("could not get bus for mdio %d ioslot %d\n",
+ phy_config[i].mdio_bus,
+ phy_config[i].ioslot);
+ else
+ wriop_set_mdio(phy_config[i].dpmacid, bus);
+ }
+}
+
+static inline void do_dpmac_config(int dpmac, const char *arg_dpmacid,
+ char *env_dpmac)
+{
+ const char *ret;
+ size_t len;
+ u8 realbusnum, ioslot;
+ struct mii_dev *bus;
+ int phy_num;
+ char *phystr = "phy00";
+
+ /*search phy in dpmac arg*/
+ for (phy_num = 0; phy_num < WRIOP_MAX_PHY_NUM; phy_num++) {
+ sprintf(phystr, "phy%d", phy_num + 1);
+ ret = hwconfig_subarg_f(arg_dpmacid, phystr, &len, env_dpmac);
+ if (!ret) {
+ /*look for phy instead of phy1*/
+ if (!phy_num)
+ ret = hwconfig_subarg_f(arg_dpmacid, "phy",
+ &len, env_dpmac);
+ if (!ret)
+ continue;
+ }
+
+ if (len != 4 || strncmp(ret, "0x", 2))
+ printf("invalid phy format in %s variable.\n"
+ "specify phy%d for %s in hex format e.g. 0x12\n",
+ env_dpmac, phy_num + 1, arg_dpmacid);
+ else
+ wriop_set_phy_address(dpmac, phy_num,
+ simple_strtoul(ret, NULL, 16));
+ }
+
+ /*search mdio in dpmac arg*/
+ ret = hwconfig_subarg_f(arg_dpmacid, "mdio", &len, env_dpmac);
+ if (ret)
+ realbusnum = *ret - '0';
+ else
+ realbusnum = EMI_NONE;
+
+ if (realbusnum) {
+ /*search io in dpmac arg*/
+ ret = hwconfig_subarg_f(arg_dpmacid, "io", &len, env_dpmac);
+ if (ret)
+ ioslot = *ret - '0';
+ else
+ ioslot = IO_SLOT_NONE;
+ /*Register the muxing front-ends to the MDIO buses*/
+ bus = lx2160a_qds_mdio_init(realbusnum, ioslot);
+ if (!bus)
+ printf("could not get bus for mdio %d ioslot %d\n",
+ realbusnum, ioslot);
+ else
+ wriop_set_mdio(dpmac, bus);
+ }
+}
+
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FSL_MC_ENET)
+ struct memac_mdio_info mdio_info;
+ struct memac_mdio_controller *regs;
+ int i;
+ const char *ret;
+ char *env_dpmac;
+ char dpmacid[] = "dpmac00", srds[] = "00_00_00";
+ size_t len;
+ struct mii_dev *bus;
+ const struct phy_config *phy_config;
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 srds_s1, srds_s2, srds_s3;
+
+ srds_s1 = in_le32(&gur->rcwsr[28]) &
+ FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
+ srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
+
+ srds_s2 = in_le32(&gur->rcwsr[28]) &
+ FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK;
+ srds_s2 >>= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
+
+ srds_s3 = in_le32(&gur->rcwsr[28]) &
+ FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_MASK;
+ srds_s3 >>= FSL_CHASSIS3_RCWSR28_SRDS3_PRTCL_SHIFT;
+
+ sprintf(srds, "%d_%d_%d", srds_s1, srds_s2, srds_s3);
+
+ regs = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1;
+ mdio_info.regs = regs;
+ mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
+
+ /*Register the EMI 1*/
+ fm_memac_mdio_init(bis, &mdio_info);
+
+ regs = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2;
+ mdio_info.regs = regs;
+ mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
+
+ /*Register the EMI 2*/
+ fm_memac_mdio_init(bis, &mdio_info);
+
+ /* "dpmac" environment variable can be used after
+ * defining "dpmac_override" in hwconfig environment variable.
+ */
+ if (hwconfig("dpmac_override")) {
+ env_dpmac = env_get("dpmac");
+ if (env_dpmac) {
+ ret = hwconfig_arg_f("srds", &len, env_dpmac);
+ if (ret) {
+ if (strncmp(ret, srds, strlen(srds))) {
+ printf("SERDES configuration changed.\n"
+ "previous: %.*s, current: %s.\n"
+ "update dpmac variable.\n",
+ (int)len, ret, srds);
+ }
+ } else {
+ printf("SERDES configuration not found.\n"
+ "Please add srds:%s in dpmac variable\n",
+ srds);
+ }
+
+ for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
+ /* Look for dpmac1 to dpmac24(current max) arg
+ * in dpmac environment variable
+ */
+ sprintf(dpmacid, "dpmac%d", i);
+ ret = hwconfig_arg_f(dpmacid, &len, env_dpmac);
+ if (ret)
+ do_dpmac_config(i, dpmacid, env_dpmac);
+ }
+ } else {
+ printf("Warning: environment dpmac not found.\n"
+ "DPAA network interfaces may not work\n");
+ }
+ } else {
+ /*Look for phy config for serdes1 in phy config table*/
+ phy_config = get_phy_config(srds_s1, serdes1_phy_config,
+ ARRAY_SIZE(serdes1_phy_config));
+ if (!phy_config) {
+ printf("%s WRIOP: Unsupported SerDes1 Protocol %d\n",
+ __func__, srds_s1);
+ } else {
+ do_phy_config(phy_config);
+ }
+ phy_config = get_phy_config(srds_s2, serdes2_phy_config,
+ ARRAY_SIZE(serdes2_phy_config));
+ if (!phy_config) {
+ printf("%s WRIOP: Unsupported SerDes2 Protocol %d\n",
+ __func__, srds_s2);
+ } else {
+ do_phy_config(phy_config);
+ }
+ phy_config = get_phy_config(srds_s3, serdes3_phy_config,
+ ARRAY_SIZE(serdes3_phy_config));
+ if (!phy_config) {
+ printf("%s WRIOP: Unsupported SerDes3 Protocol %d\n",
+ __func__, srds_s3);
+ } else {
+ do_phy_config(phy_config);
+ }
+ }
+
+ if (wriop_get_enet_if(WRIOP1_DPMAC17) == PHY_INTERFACE_MODE_RGMII_ID) {
+ wriop_set_phy_address(WRIOP1_DPMAC17, 0, RGMII_PHY_ADDR1);
+ bus = lx2160a_qds_mdio_init(EMI1, EMI1_RGMII1);
+ if (!bus)
+ printf("could not get bus for RGMII1\n");
+ else
+ wriop_set_mdio(WRIOP1_DPMAC17, bus);
+ }
+
+ if (wriop_get_enet_if(WRIOP1_DPMAC18) == PHY_INTERFACE_MODE_RGMII_ID) {
+ wriop_set_phy_address(WRIOP1_DPMAC18, 0, RGMII_PHY_ADDR2);
+ bus = lx2160a_qds_mdio_init(EMI1, EMI1_RGMII2);
+ if (!bus)
+ printf("could not get bus for RGMII2\n");
+ else
+ wriop_set_mdio(WRIOP1_DPMAC18, bus);
+ }
+
+ cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+#ifdef CONFIG_PHY_AQUANTIA
+ /*
+ * Export functions to be used by AQ firmware
+ * upload application
+ */
+ gd->jt->strcpy = strcpy;
+ gd->jt->mdelay = mdelay;
+ gd->jt->mdio_get_current_dev = mdio_get_current_dev;
+ gd->jt->phy_find_by_mask = phy_find_by_mask;
+ gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname;
+ gd->jt->miiphy_set_current_dev = miiphy_set_current_dev;
+#endif
+ return pci_eth_init(bis);
+}
+
+#if defined(CONFIG_RESET_PHY_R)
+void reset_phy(void)
+{
+#if defined(CONFIG_FSL_MC_ENET)
+ mc_env_boot();
+#endif
+}
+#endif /* CONFIG_RESET_PHY_R */
+
+#if defined(CONFIG_FSL_MC_ENET)
+int fdt_fixup_dpmac_phy_handle(void *fdt, int dpmac_id, int node_phandle)
+{
+ int offset;
+ int ret;
+ char dpmac_str[] = "dpmacs at 00";
+ const char *phy_string;
+
+ offset = fdt_path_offset(fdt, "/soc/fsl-mc/dpmacs");
+
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/fsl-mc/dpmacs");
+
+ if (offset < 0) {
+ printf("dpmacs node not found in device tree\n");
+ return offset;
+ }
+
+ sprintf(dpmac_str, "dpmac@%x", dpmac_id);
+ debug("dpmac_str = %s\n", dpmac_str);
+
+ offset = fdt_subnode_offset(fdt, offset, dpmac_str);
+ if (offset < 0) {
+ printf("%s node not found in device tree\n", dpmac_str);
+ return offset;
+ }
+
+ ret = fdt_appendprop_cell(fdt, offset, "phy-handle", node_phandle);
+ if (ret)
+ printf("%d@%s %d\n", __LINE__, __func__, ret);
+
+ phy_string = phy_interface_strings[wriop_get_enet_if(dpmac_id)];
+ ret = fdt_setprop_string(fdt, offset, "phy-connection-type",
+ phy_string);
+ if (ret)
+ printf("%d@%s %d\n", __LINE__, __func__, ret);
+
+ return ret;
+}
+
+int fdt_get_ioslot_offset(void *fdt, struct mii_dev *mii_dev, int fpga_offset)
+{
+ char mdio_mux_str[] = "mdio0_mux";
+ char mdio_ioslot_str[] = "mdio0_ioslot1";
+ struct lx2160a_qds_mdio *priv;
+ int real_bus_num, ioslot, offset;
+
+ /*Test if the MDIO bus is real mdio bus or muxing front end ?*/
+ if (strncmp(mii_dev->name, "LX2160A_QDS_MDIO",
+ strlen("LX2160A_QDS_MDIO")))
+ return -1;
+
+ /*Get the real MDIO bus num and ioslot info from bus's priv data*/
+ priv = mii_dev->priv;
+ real_bus_num = priv->realbusnum;
+ ioslot = priv->ioslot;
+
+ debug("real_bus_num = %d, ioslot = %d\n", real_bus_num, ioslot);
+
+ /* in fdt the EMI numbers are 0 based i.e. EMI1 is 0
+ * while in u-boot EMI1 is 1
+ */
+ sprintf(mdio_mux_str, "mdio%1d_mux", real_bus_num - 1);
+ if (ioslot > IO_SLOT_8)
+ sprintf(mdio_ioslot_str, "mdio0_rgmii%d", ioslot - IO_SLOT_8);
+ else
+ sprintf(mdio_ioslot_str, "mdio%1d_ioslot%1d",
+ real_bus_num - 1, ioslot);
+
+ offset = fdt_subnode_offset(fdt, fpga_offset, mdio_mux_str);
+ if (offset < 0) {
+ printf("%s node not found in device tree\n", mdio_mux_str);
+ return offset;
+ }
+ offset = fdt_subnode_offset(fdt, offset, mdio_ioslot_str);
+ if (offset < 0) {
+ printf("%s node not found in device tree\n", mdio_ioslot_str);
+ return offset;
+ }
+
+ return offset;
+}
+
+int fdt_create_phy_node(void *fdt, int offset, u8 phyaddr, int *subnodeoffset,
+ struct phy_device *phy_dev, int dpmac_id, int phandle)
+{
+ char phy_node_name[] = "phy00 at 00";
+ char phy_id_compatible_str[] = "ethernet-phy-id0000.0000";
+ int ret;
+
+ sprintf(phy_node_name, "phy%d@%x", dpmac_id, phyaddr);
+ debug("phy_node_name = %s\n", phy_node_name);
+
+ *subnodeoffset = fdt_add_subnode(fdt, offset, phy_node_name);
+ if (*subnodeoffset <= 0) {
+ printf("Could not add subnode %s\n", phy_node_name);
+ return *subnodeoffset;
+ }
+
+ sprintf(phy_id_compatible_str, "ethernet-phy-id%04x.%04x",
+ phy_dev->phy_id >> 16, phy_dev->phy_id & 0xFFFF);
+ debug("phy_id_compatible_str %s\n", phy_id_compatible_str);
+
+ ret = fdt_setprop_string(fdt, *subnodeoffset, "compatible",
+ phy_id_compatible_str);
+ if (ret) {
+ printf("%d@%s %d\n", __LINE__, __func__, ret);
+ goto out;
+ }
+ ret = fdt_setprop_cell(fdt, *subnodeoffset, "reg", phyaddr);
+ if (ret) {
+ printf("%d@%s %d\n", __LINE__, __func__, ret);
+ goto out;
+ }
+ ret = fdt_set_phandle(fdt, *subnodeoffset, phandle);
+ if (ret) {
+ printf("%d@%s %d\n", __LINE__, __func__, ret);
+ goto out;
+ }
+
+out:
+ if (ret)
+ fdt_del_node(fdt, *subnodeoffset);
+
+ return ret;
+}
+
+int fdt_fixup_board_phy(void *fdt)
+{
+ int fpga_offset, offset, subnodeoffset;
+ struct mii_dev *mii_dev;
+ struct list_head *mii_devs, *entry;
+ int ret, dpmac_id, phandle, i;
+ struct phy_device *phy_dev;
+ char ethname[ETH_NAME_LEN];
+ const char *phy_string;
+ phy_interface_t phy_interface;
+
+ ret = 0;
+ /* we know FPGA is connected to i2c0, therefore search path directly,
+ * instead of compatible property, as it saves time
+ */
+ fpga_offset = fdt_path_offset(fdt, "/soc/i2c at 2000000/fpga");
+
+ if (fpga_offset < 0)
+ fpga_offset = fdt_path_offset(fdt, "/i2c at 2000000/fpga");
+
+ if (fpga_offset < 0) {
+ printf("i2c at 2000000/fpga node not found in device tree\n");
+ return fpga_offset;
+ }
+
+ phandle = fdt_alloc_phandle(fdt);
+ mii_devs = mdio_get_list_head();
+
+ list_for_each(entry, mii_devs) {
+ mii_dev = list_entry(entry, struct mii_dev, link);
+ debug("mii_dev name : %s\n", mii_dev->name);
+ offset = fdt_get_ioslot_offset(fdt, mii_dev, fpga_offset);
+ if (offset < 0)
+ continue;
+
+ // Look for phy devices attached to MDIO bus muxing front end
+ // and create their entries with compatible being the device id
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ phy_dev = mii_dev->phymap[i];
+ if (!phy_dev)
+ continue;
+
+ // TODO: use sscanf instead of loop
+ dpmac_id = WRIOP1_DPMAC1;
+ phy_interface = wriop_get_enet_if(dpmac_id);
+ phy_string = phy_interface_strings[phy_interface];
+ while (dpmac_id < NUM_WRIOP_PORTS) {
+ snprintf(ethname, ETH_NAME_LEN, "DPMAC%d@%s",
+ dpmac_id,
+ phy_string);
+ if (strcmp(ethname, phy_dev->dev->name) == 0)
+ break;
+ dpmac_id++;
+ }
+ if (dpmac_id == NUM_WRIOP_PORTS)
+ continue;
+
+ ret = fdt_create_phy_node(fdt, offset, i,
+ &subnodeoffset,
+ phy_dev, dpmac_id, phandle);
+ if (ret)
+ break;
+
+ ret = fdt_fixup_dpmac_phy_handle(fdt,
+ dpmac_id, phandle);
+ if (ret) {
+ fdt_del_node(fdt, subnodeoffset);
+ break;
+ }
+ phandle++;
+ }
+
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+#endif // CONFIG_FSL_MC_ENET
+
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index a62222e25c..530f658bd5 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -26,6 +26,18 @@
#include "../common/vid.h"
#include <fsl_immap.h>
+#ifdef CONFIG_TARGET_LX2160AQDS
+#define CFG_MUX_I2C_SDHC(reg, value) ((reg & 0x3f) | value)
+#define SET_CFG_MUX1_SDHC1_SDHC(reg) (reg & 0x3f)
+#define SET_CFG_MUX2_SDHC1_SPI(reg, value) ((reg & 0xcf) | value)
+#define SET_CFG_MUX3_SDHC1_SPI(reg, value) ((reg & 0xf8) | value)
+#define SET_CFG_MUX_SDHC2_DSPI(reg, value) ((reg & 0xf8) | value)
+#define SET_CFG_MUX1_SDHC1_DSPI(reg, value) ((reg & 0x3f) | value)
+#define SDHC1_BASE_PMUX_DSPI 2
+#define SDHC2_BASE_PMUX_DSPI 2
+#define IIC5_PMUX_SPI3 3
+#endif /* CONFIG_TARGET_LX2160AQDS */
+
DECLARE_GLOBAL_DATA_PTR;
static struct pl01x_serial_platdata serial0 = {
@@ -85,11 +97,80 @@ int board_early_init_f(void)
return 0;
}
+#if defined(CONFIG_TARGET_LX2160AQDS)
+void esdhc_dspi_status_fixup(void *blob)
+{
+ const char esdhc0_path[] = "/soc/esdhc at 2140000";
+ const char esdhc1_path[] = "/soc/esdhc at 2150000";
+ const char dspi0_path[] = "/soc/dspi at 2100000";
+ const char dspi1_path[] = "/soc/dspi at 2110000";
+ const char dspi2_path[] = "/soc/dspi at 2120000";
+
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 sdhc1_base_pmux;
+ u32 sdhc2_base_pmux;
+ u32 iic5_pmux;
+
+ /* Check RCW field sdhc1_base_pmux to enable/disable
+ * esdhc0/dspi0 DT node
+ */
+ sdhc1_base_pmux = gur_in32(&gur->rcwsr[FSL_CHASSIS3_RCWSR12_REGSR - 1])
+ & FSL_CHASSIS3_SDHC1_BASE_PMUX_MASK;
+ sdhc1_base_pmux >>= FSL_CHASSIS3_SDHC1_BASE_PMUX_SHIFT;
+
+ if (sdhc1_base_pmux == SDHC1_BASE_PMUX_DSPI) {
+ do_fixup_by_path(blob, dspi0_path, "status", "okay",
+ sizeof("okay"), 1);
+ do_fixup_by_path(blob, esdhc0_path, "status", "disabled",
+ sizeof("disabled"), 1);
+ } else {
+ do_fixup_by_path(blob, esdhc0_path, "status", "okay",
+ sizeof("okay"), 1);
+ do_fixup_by_path(blob, dspi0_path, "status", "disabled",
+ sizeof("disabled"), 1);
+ }
+
+ /* Check RCW field sdhc2_base_pmux to enable/disable
+ * esdhc1/dspi1 DT node
+ */
+ sdhc2_base_pmux = gur_in32(&gur->rcwsr[FSL_CHASSIS3_RCWSR13_REGSR - 1])
+ & FSL_CHASSIS3_SDHC2_BASE_PMUX_MASK;
+ sdhc2_base_pmux >>= FSL_CHASSIS3_SDHC2_BASE_PMUX_SHIFT;
+
+ if (sdhc2_base_pmux == SDHC2_BASE_PMUX_DSPI) {
+ do_fixup_by_path(blob, dspi1_path, "status", "okay",
+ sizeof("okay"), 1);
+ do_fixup_by_path(blob, esdhc1_path, "status", "disabled",
+ sizeof("disabled"), 1);
+ } else {
+ do_fixup_by_path(blob, esdhc1_path, "status", "okay",
+ sizeof("okay"), 1);
+ do_fixup_by_path(blob, dspi1_path, "status", "disabled",
+ sizeof("disabled"), 1);
+ }
+
+ /* Check RCW field IIC5 to enable dspi2 DT node */
+ iic5_pmux = gur_in32(&gur->rcwsr[FSL_CHASSIS3_RCWSR12_REGSR - 1])
+ & FSL_CHASSIS3_IIC5_PMUX_MASK;
+ iic5_pmux >>= FSL_CHASSIS3_IIC5_PMUX_SHIFT;
+
+ if (iic5_pmux == IIC5_PMUX_SPI3) {
+ do_fixup_by_path(blob, dspi2_path, "status", "okay",
+ sizeof("okay"), 1);
+ }
+}
+#endif
+
int esdhc_status_fixup(void *blob, const char *compat)
{
+#if defined(CONFIG_TARGET_LX2160AQDS)
+ /* Enable esdhc and dspi DT nodes based on RCW fields */
+ esdhc_dspi_status_fixup(blob);
+#else
/* Enable both esdhc DT nodes for LX2160ARDB */
do_fixup_by_compat(blob, compat, "status", "okay",
sizeof("okay"), 1);
+#endif
return 0;
}
@@ -107,9 +188,20 @@ int checkboard(void)
enum boot_src src = get_boot_src();
char buf[64];
u8 sw;
+#ifdef CONFIG_TARGET_LX2160AQDS
+ int clock;
+ static const char *const freq[] = {"100", "125", "156.25",
+ "161.13", "322.26", "", "", "",
+ "", "", "", "", "", "", "",
+ "100 separate SSCG"};
+#endif
cpu_name(buf);
+#ifdef CONFIG_TARGET_LX2160AQDS
+ printf("Board: %s-QDS, ", buf);
+#else
printf("Board: %s-RDB, ", buf);
+#endif
sw = QIXIS_READ(arch);
printf("Board version: %c, boot from ", (sw & 0xf) - 1 + 'A');
@@ -136,22 +228,206 @@ int checkboard(void)
break;
}
}
- printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
+#ifdef CONFIG_TARGET_LX2160AQDS
+ printf("FPGA: v%d (%s), build %d",
+ (int)QIXIS_READ(scver), qixis_read_tag(buf),
+ (int)qixis_read_minor());
+ /* the timestamp string contains "\n" at the end */
+ printf(" on %s", qixis_read_time(buf));
+
+ puts("SERDES1 Reference : ");
+ sw = QIXIS_READ(brdcfg[2]);
+ clock = sw >> 4;
+ printf("Clock1 = %sMHz ", freq[clock]);
+ clock = sw & 0x0f;
+ printf("Clock2 = %sMHz", freq[clock]);
+
+ sw = QIXIS_READ(brdcfg[3]);
+ puts("\nSERDES2 Reference : ");
+ clock = sw >> 4;
+ printf("Clock1 = %sMHz ", freq[clock]);
+ clock = sw & 0x0f;
+ printf("Clock2 = %sMHz", freq[clock]);
+
+ sw = QIXIS_READ(brdcfg[12]);
+ puts("\nSERDES3 Reference : ");
+ clock = sw >> 4;
+ printf("Clock1 = %sMHz Clock2 = %sMHz\n", freq[clock], freq[clock]);
+#else
+ printf("FPGA: v%d.%d\n", QIXIS_READ(scver), QIXIS_READ(tagdata));
puts("SERDES1 Reference: Clock1 = 161.13MHz Clock2 = 161.13MHz\n");
puts("SERDES2 Reference: Clock1 = 100MHz Clock2 = 100MHz\n");
puts("SERDES3 Reference: Clock1 = 100MHz Clock2 = 100Hz\n");
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_TARGET_LX2160AQDS
+/*
+ * implementation of CONFIG_ESDHC_DETECT_QUIRK Macro.
+ */
+u8 qixis_esdhc_detect_quirk(void)
+{
+ /* for LX2160AQDS res1[1] @ offset 0x1A is SDHC1 Control/Status (SDHC1)
+ * SDHC1 Card ID:
+ * Specifies the type of card installed in the SDHC1 adapter slot.
+ * 000= (reserved)
+ * 001= eMMC V4.5 adapter is installed.
+ * 010= SD/MMC 3.3V adapter is installed.
+ * 011= eMMC V4.4 adapter is installed.
+ * 100= eMMC V5.0 adapter is installed.
+ * 101= MMC card/Legacy (3.3V) adapter is installed.
+ * 110= SDCard V2/V3 adapter installed.
+ * 111= no adapter is installed.
+ */
+ return ((QIXIS_READ(res1[1]) & QIXIS_SDID_MASK) !=
+ QIXIS_ESDHC_NO_ADAPTER);
+}
+
+int config_board_mux(void)
+{
+ u8 reg11, reg5, reg13;
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 sdhc1_base_pmux;
+ u32 sdhc2_base_pmux;
+ u32 iic5_pmux;
+
+ /* Routes {I2C2_SCL, I2C2_SDA} to SDHC1 as {SDHC1_CD_B, SDHC1_WP}.
+ * Routes {I2C3_SCL, I2C3_SDA} to CAN transceiver as {CAN1_TX,CAN1_RX}.
+ * Routes {I2C4_SCL, I2C4_SDA} to CAN transceiver as {CAN2_TX,CAN2_RX}.
+ * Qixis and remote systems are isolated from the I2C1 bus.
+ * Processor connections are still available.
+ * SPI2 CS2_B controls EN25S64 SPI memory device.
+ * SPI3 CS2_B controls EN25S64 SPI memory device.
+ * EC2 connects to PHY #2 using RGMII protocol.
+ * CLK_OUT connects to FPGA for clock measurement.
+ */
+
+ reg5 = QIXIS_READ(brdcfg[5]);
+ reg5 = CFG_MUX_I2C_SDHC(reg5, 0x40);
+ QIXIS_WRITE(brdcfg[5], reg5);
+
+ /* Check RCW field sdhc1_base_pmux
+ * esdhc0 : sdhc1_base_pmux = 0
+ * dspi0 : sdhc1_base_pmux = 2
+ */
+ sdhc1_base_pmux = gur_in32(&gur->rcwsr[FSL_CHASSIS3_RCWSR12_REGSR - 1])
+ & FSL_CHASSIS3_SDHC1_BASE_PMUX_MASK;
+ sdhc1_base_pmux >>= FSL_CHASSIS3_SDHC1_BASE_PMUX_SHIFT;
+
+ if (sdhc1_base_pmux == SDHC1_BASE_PMUX_DSPI) {
+ reg11 = QIXIS_READ(brdcfg[11]);
+ reg11 = SET_CFG_MUX1_SDHC1_DSPI(reg11, 0x40);
+ QIXIS_WRITE(brdcfg[11], reg11);
+ } else {
+ /* - Routes {SDHC1_CMD, SDHC1_CLK } to SDHC1 adapter slot.
+ * {SDHC1_DAT3, SDHC1_DAT2} to SDHC1 adapter slot.
+ * {SDHC1_DAT1, SDHC1_DAT0} to SDHC1 adapter slot.
+ */
+ reg11 = QIXIS_READ(brdcfg[11]);
+ reg11 = SET_CFG_MUX1_SDHC1_SDHC(reg11);
+ QIXIS_WRITE(brdcfg[11], reg11);
+ }
+
+ /* Check RCW field sdhc2_base_pmux
+ * esdhc1 : sdhc2_base_pmux = 0 (default)
+ * dspi1 : sdhc2_base_pmux = 2
+ */
+ sdhc2_base_pmux = gur_in32(&gur->rcwsr[FSL_CHASSIS3_RCWSR13_REGSR - 1])
+ & FSL_CHASSIS3_SDHC2_BASE_PMUX_MASK;
+ sdhc2_base_pmux >>= FSL_CHASSIS3_SDHC2_BASE_PMUX_SHIFT;
+
+ if (sdhc2_base_pmux == SDHC2_BASE_PMUX_DSPI) {
+ reg13 = QIXIS_READ(brdcfg[13]);
+ reg13 = SET_CFG_MUX_SDHC2_DSPI(reg13, 0x01);
+ QIXIS_WRITE(brdcfg[13], reg13);
+ } else {
+ reg13 = QIXIS_READ(brdcfg[13]);
+ reg13 = SET_CFG_MUX_SDHC2_DSPI(reg13, 0x00);
+ QIXIS_WRITE(brdcfg[13], reg13);
+ }
+
+ /* Check RCW field IIC5 to enable dspi2 DT nodei
+ * dspi2: IIC5 = 3
+ */
+ iic5_pmux = gur_in32(&gur->rcwsr[FSL_CHASSIS3_RCWSR12_REGSR - 1])
+ & FSL_CHASSIS3_IIC5_PMUX_MASK;
+ iic5_pmux >>= FSL_CHASSIS3_IIC5_PMUX_SHIFT;
+
+ if (iic5_pmux == IIC5_PMUX_SPI3) {
+ /* - Routes {SDHC1_DAT4} to SPI3 devices as {SPI3_M_CS0_B}. */
+ reg11 = QIXIS_READ(brdcfg[11]);
+ reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x10);
+ QIXIS_WRITE(brdcfg[11], reg11);
+
+ /* - Routes {SDHC1_DAT5, SDHC1_DAT6} nowhere.
+ * {SDHC1_DAT7, SDHC1_DS } to {nothing, SPI3_M0_CLK }.
+ * {I2C5_SCL, I2C5_SDA } to {SPI3_M0_MOSI, SPI3_M0_MISO}.
+ */
+ reg11 = QIXIS_READ(brdcfg[11]);
+ reg11 = SET_CFG_MUX3_SDHC1_SPI(reg11, 0x01);
+ QIXIS_WRITE(brdcfg[11], reg11);
+ } else {
+ /* Routes {SDHC1_DAT4} to SDHC1 adapter slot */
+ reg11 = QIXIS_READ(brdcfg[11]);
+ reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x00);
+ QIXIS_WRITE(brdcfg[11], reg11);
+
+ /* - Routes {SDHC1_DAT5, SDHC1_DAT6} to SDHC1 adapter slot.
+ * {SDHC1_DAT7, SDHC1_DS } to SDHC1 adapter slot.
+ * {I2C5_SCL, I2C5_SDA } to SDHC1 adapter slot.
+ */
+ reg11 = QIXIS_READ(brdcfg[11]);
+ reg11 = SET_CFG_MUX3_SDHC1_SPI(reg11, 0x00);
+ QIXIS_WRITE(brdcfg[11], reg11);
+ }
+
return 0;
}
+#else
+int config_board_mux(void)
+{
+ return 0;
+}
+#endif
unsigned long get_board_sys_clk(void)
{
+#ifdef CONFIG_TARGET_LX2160AQDS
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (sysclk_conf & 0x03) {
+ case QIXIS_SYSCLK_100:
+ return 100000000;
+ case QIXIS_SYSCLK_125:
+ return 125000000;
+ case QIXIS_SYSCLK_133:
+ return 133333333;
+ }
+ return 100000000;
+#else
return 100000000;
+#endif
}
unsigned long get_board_ddr_clk(void)
{
+#ifdef CONFIG_TARGET_LX2160AQDS
+ u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch ((ddrclk_conf & 0x30) >> 4) {
+ case QIXIS_DDRCLK_100:
+ return 100000000;
+ case QIXIS_DDRCLK_125:
+ return 125000000;
+ case QIXIS_DDRCLK_133:
+ return 133333333;
+ }
+ return 100000000;
+#else
return 100000000;
+#endif
}
int board_init(void)
@@ -184,6 +460,8 @@ void detail_board_ddr_info(void)
#if defined(CONFIG_ARCH_MISC_INIT)
int arch_misc_init(void)
{
+ config_board_mux();
+
return 0;
}
#endif
diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig
new file mode 100644
index 0000000000..9d157734fd
--- /dev/null
+++ b/configs/lx2160aqds_tfa_defconfig
@@ -0,0 +1,74 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LX2160AQDS=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-qds"
+CONFIG_NR_DRAM_BANKS=3
+CONFIG_DM=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TFABOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf"
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_EEPROM=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_SERIAL=y
+CONFIG_CONS_INDEX=0
+CONFIG_FSL_CAAM=y
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_USE_4K_SECTORS=n
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_NXP_FSPI=y
+CONFIG_FSPI_AHB_EN_4BYTE=y
+CONFIG_SYS_FSPI_AHB_INIT=y
+CONFIG_PHYLIB=y
+CONFIG_NETDEVICES=y
+CONFIG_PHY_GIGE=y
+CONFIG_CMD_NET=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_EXT2=y
+CONFIG_NET=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SCSI=y
+# CONFIG_SYS_FSL_DDR_PHY is not set
+CONFIG_SYS_GEN2_DDR_PHY=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x6000
+CONFIG_PHYLIB_10G=y
+CONFIG_PHY_AQUANTIA=y # X-M11-USXGMII
+CONFIG_PHY_CORTINA=y # X-M7-40G
+CONFIG_PHY_REALTEK=y # RGMII
+CONFIG_PHY_INPHI=y # X-M8-100G
+CONFIG_PHY_VITESSE=y # SGMII PEX RISER
+CONFIG_HUSH_PARSER=y
+CONFIG_EMC2305=y
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
new file mode 100644
index 0000000000..980348d96e
--- /dev/null
+++ b/include/configs/lx2160aqds.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __LX2_QDS_H
+#define __LX2_QDS_H
+
+#include "lx2160a_common.h"
+
+/* Qixis */
+#define QIXIS_XMAP_MASK 0x07
+#define QIXIS_XMAP_SHIFT 5
+#define QIXIS_RST_CTL_RESET_EN 0x30
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x20
+#define QIXIS_LBMAP_QSPI 0x00
+#define QIXIS_RCW_SRC_QSPI 0xff
+#define QIXIS_RST_CTL_RESET 0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_LBMAP_MASK 0x0f
+#define QIXIS_LBMAP_SD
+#define QIXIS_RCW_SRC_SD 0x08
+#define QIXIS_SDID_MASK 0x07
+#define QIXIS_ESDHC_NO_ADAPTER 0x7
+#define NON_EXTENDED_DUTCFG
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_100 0x0
+#define QIXIS_SYSCLK_125 0x1
+#define QIXIS_SYSCLK_133 0x2
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_100 0x0
+#define QIXIS_DDRCLK_125 0x1
+#define QIXIS_DDRCLK_133 0x2
+
+#define BRDCFG4_EMI1SEL_MASK 0x38
+#define BRDCFG4_EMI1SEL_SHIFT 3
+#define BRDCFG4_EMI2SEL_MASK 0x07
+#define BRDCFG4_EMI2SEL_SHIFT 0
+
+/*
+ * MMC
+ */
+#ifdef CONFIG_MMC
+#ifndef __ASSEMBLY__
+u8 qixis_esdhc_detect_quirk(void);
+#endif
+#define CONFIG_ESDHC_DETECT_QUIRK qixis_esdhc_detect_quirk()
+#endif
+
+/* DSPI */
+#ifdef CONFIG_FSL_DSPI
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_SPI_FLASH_EON
+#endif
+
+/* RTC */
+#define CONFIG_SYS_RTC_BUS_NUM 0
+#define I2C_MUX_CH_RTC 0xB
+
+/* MAC/PHY configuration */
+#if defined(CONFIG_FSL_MC_ENET)
+#define CONFIG_MII
+#define CONFIG_ETHPRIME "DPMAC17 at rgmii-id"
+
+#define AQ_PHY_ADDR1 0x00
+#define AQ_PHY_ADDR2 0x01
+#define AQ_PHY_ADDR3 0x02
+#define AQ_PHY_ADDR4 0x03
+#define AQR405_IRQ_MASK 0x36
+
+#define CORTINA_NO_FW_UPLOAD
+#define CORTINA_PHY_ADDR1 0x0
+
+#define RGMII_PHY_ADDR1 0x01
+#define RGMII_PHY_ADDR2 0x02
+
+#define INPHI_PHY_ADDR1 0x0
+#define INPHI_PHY_ADDR2 0x1
+
+#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
+#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
+#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
+#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
+
+#endif
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:bank_intlv=auto\0" \
+ "scriptaddr=0x80800000\0" \
+ "kernel_addr_r=0x81000000\0" \
+ "pxefile_addr_r=0x81000000\0" \
+ "fdt_addr_r=0x88000000\0" \
+ "ramdisk_addr_r=0x89000000\0" \
+ "loadaddr=0x80100000\0" \
+ "kernel_addr=0x100000\0" \
+ "ramdisk_addr=0x800000\0" \
+ "ramdisk_size=0x2000000\0" \
+ "fdt_high=0xa0000000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_start=0x21000000\0" \
+ "mcmemsize=0x40000000\0"
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LX2_QDS_H */
--
2.17.1
More information about the U-Boot
mailing list