[U-Boot] [PATCH 0/2] Add Khadas VIM2 board support

[Neil Armstrong]

Hi Loic,

On 03/10/2018 12:02, Loic Devulder wrote:
> This adds platform code for the Khadas VIM2 board based on a
> Meson GXM (S912) SoC with the Meson GXM configuration.

With the "ARM: meson: Extend mem_map to support 3GiB of RAM" patch, I'm glad
this SoC will also be handled upstream, with the onboard SPI NOR flash to
store U-boot, it's a very good candidate for a full EBBR experience !

Neil

> 
> This initial submission supports UART, MMC/SDCard and Ethernet.
> USB is partially supported.
> 
> All the code is from Neil Armstrong! I just rebased the code, do
> some cleanup and tested on my board.
> 
> Loic Devulder (2):
>   ARM: meson: Add Khadas VIM2 board DT
>   ARM: meson: Add Khadas VIM2 board support
> 
>  arch/arm/dts/Makefile                   |   3 +-
>  arch/arm/dts/meson-gxm-khadas-vim2.dts  | 412 ++++++++++++++++++++++++++++++++
>  arch/arm/dts/meson-gxm.dtsi             | 119 +++++++++
>  arch/arm/mach-meson/Kconfig             |  23 ++
>  board/amlogic/khadas-vim2/Kconfig       |  12 +
>  board/amlogic/khadas-vim2/MAINTAINERS   |   6 +
>  board/amlogic/khadas-vim2/Makefile      |   6 +
>  board/amlogic/khadas-vim2/README        | 103 ++++++++
>  board/amlogic/khadas-vim2/khadas-vim2.c |  62 +++++
>  configs/khadas-vim2_defconfig           |  51 ++++
>  include/configs/khadas-vim2.h           |  18 ++
>  11 files changed, 814 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/dts/meson-gxm-khadas-vim2.dts
>  create mode 100644 arch/arm/dts/meson-gxm.dtsi
>  create mode 100644 board/amlogic/khadas-vim2/Kconfig
>  create mode 100644 board/amlogic/khadas-vim2/MAINTAINERS
>  create mode 100644 board/amlogic/khadas-vim2/Makefile
>  create mode 100644 board/amlogic/khadas-vim2/README
>  create mode 100644 board/amlogic/khadas-vim2/khadas-vim2.c
>  create mode 100644 configs/khadas-vim2_defconfig
>  create mode 100644 include/configs/khadas-vim2.h
>