[U-Boot] [PATCH 02/13] mmc: tmio: Switch to clock framework

[Marek Vasut]

Switch the driver to using clk_get_rate()/clk_set_rate() instead of
caching the mclk frequency in it's private data. This is required on
the SDHI variant of the controller, where the upstream mclk need to
be adjusted when using UHS modes.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Masahiro Yamada <yamada.masahiro at socionext.com>
---
 drivers/mmc/renesas-sdhi.c | 14 ++++++--------
 drivers/mmc/tmio-common.c  | 12 +++++++++---
 drivers/mmc/tmio-common.h  |  2 +-
 drivers/mmc/uniphier-sd.c  | 13 +++++--------
 4 files changed, 21 insertions(+), 20 deletions(-)

diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c
index f8dc5f57ce..1590f496d7 100644
--- a/drivers/mmc/renesas-sdhi.c
+++ b/drivers/mmc/renesas-sdhi.c
@@ -333,7 +333,6 @@ static int renesas_sdhi_probe(struct udevice *dev)
 	struct tmio_sd_priv *priv = dev_get_priv(dev);
 	u32 quirks = dev_get_driver_data(dev);
 	struct fdt_resource reg_res;
-	struct clk clk;
 	DECLARE_GLOBAL_DATA_PTR;
 	int ret;
 
@@ -350,22 +349,21 @@ static int renesas_sdhi_probe(struct udevice *dev)
 			quirks |= TMIO_SD_CAP_16BIT;
 	}
 
-	ret = clk_get_by_index(dev, 0, &clk);
+	ret = clk_get_by_index(dev, 0, &priv->clk);
 	if (ret < 0) {
 		dev_err(dev, "failed to get host clock\n");
 		return ret;
 	}
 
 	/* set to max rate */
-	priv->mclk = clk_set_rate(&clk, ULONG_MAX);
-	if (IS_ERR_VALUE(priv->mclk)) {
+	ret = clk_set_rate(&priv->clk, 200000000);
+	if (ret < 0) {
 		dev_err(dev, "failed to set rate for host clock\n");
-		clk_free(&clk);
-		return priv->mclk;
+		clk_free(&priv->clk);
+		return ret;
 	}
 
-	ret = clk_enable(&clk);
-	clk_free(&clk);
+	ret = clk_enable(&priv->clk);
 	if (ret) {
 		dev_err(dev, "failed to enable host clock\n");
 		return ret;
diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c
index 5f927c6150..9eb2984ed3 100644
--- a/drivers/mmc/tmio-common.c
+++ b/drivers/mmc/tmio-common.c
@@ -556,11 +556,14 @@ static void tmio_sd_set_clk_rate(struct tmio_sd_priv *priv,
 {
 	unsigned int divisor;
 	u32 val, tmp;
+	ulong mclk;
 
 	if (!mmc->clock)
 		return;
 
-	divisor = DIV_ROUND_UP(priv->mclk, mmc->clock);
+	mclk = clk_get_rate(&priv->clk);
+
+	divisor = DIV_ROUND_UP(mclk, mmc->clock);
 
 	if (divisor <= 1)
 		val = (priv->caps & TMIO_SD_CAP_RCAR) ?
@@ -704,6 +707,7 @@ int tmio_sd_probe(struct udevice *dev, u32 quirks)
 	struct tmio_sd_priv *priv = dev_get_priv(dev);
 	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
 	fdt_addr_t base;
+	ulong mclk;
 	int ret;
 
 	base = devfdt_get_addr(dev);
@@ -744,10 +748,12 @@ int tmio_sd_probe(struct udevice *dev, u32 quirks)
 
 	tmio_sd_host_init(priv);
 
+	mclk = clk_get_rate(&priv->clk);
+
 	plat->cfg.voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34;
-	plat->cfg.f_min = priv->mclk /
+	plat->cfg.f_min = mclk /
 			(priv->caps & TMIO_SD_CAP_DIV1024 ? 1024 : 512);
-	plat->cfg.f_max = priv->mclk;
+	plat->cfg.f_max = mclk;
 	plat->cfg.b_max = U32_MAX; /* max value of TMIO_SD_SECCNT */
 
 	upriv->mmc = &plat->mmc;
diff --git a/drivers/mmc/tmio-common.h b/drivers/mmc/tmio-common.h
index 792b1ba5ae..fcdee4df57 100644
--- a/drivers/mmc/tmio-common.h
+++ b/drivers/mmc/tmio-common.h
@@ -117,7 +117,7 @@ struct tmio_sd_plat {
 
 struct tmio_sd_priv {
 	void __iomem			*regbase;
-	unsigned long			mclk;
+	struct clk			clk;
 	unsigned int			version;
 	u32				caps;
 #define TMIO_SD_CAP_NONREMOVABLE	BIT(0)	/* Nonremovable e.g. eMMC */
diff --git a/drivers/mmc/uniphier-sd.c b/drivers/mmc/uniphier-sd.c
index 813c28494c..870d1c9929 100644
--- a/drivers/mmc/uniphier-sd.c
+++ b/drivers/mmc/uniphier-sd.c
@@ -38,28 +38,25 @@ static int uniphier_sd_probe(struct udevice *dev)
 	struct clk clk;
 	int ret;
 
-	ret = clk_get_by_index(dev, 0, &clk);
+	ret = clk_get_by_index(dev, 0, &priv->clk);
 	if (ret < 0) {
 		dev_err(dev, "failed to get host clock\n");
 		return ret;
 	}
 
 	/* set to max rate */
-	priv->mclk = clk_set_rate(&clk, ULONG_MAX);
-	if (IS_ERR_VALUE(priv->mclk)) {
+	ret = clk_set_rate(&priv->clk, ULONG_MAX);
+	if (ret < 0) {
 		dev_err(dev, "failed to set rate for host clock\n");
-		clk_free(&clk);
-		return priv->mclk;
+		clk_free(&priv->clk);
+		return ret;
 	}
 
 	ret = clk_enable(&clk);
-	clk_free(&clk);
 	if (ret) {
 		dev_err(dev, "failed to enable host clock\n");
 		return ret;
 	}
-#else
-	priv->mclk = 100000000;
 #endif
 
 	return tmio_sd_probe(dev, 0);
-- 
2.18.0