[U-Boot] [PATCH v2 29/33] armv8: ls1012ardb: Add TFABOOT support

Rajesh Bhagat rajesh.bhagat at nxp.com
Sun Oct 7 10:21:27 UTC 2018


TFABOOT support includes:
 - ls1012ardb_tfa_defconfig to be loaded by trusted firmware
 - environment address and size changes for TFABOOT
 - define BOOTCOMMAND for TFABOOT

Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
Signed-off-by: Pankit Garg <pankit.garg at nxp.com>
---
Change in v2:                                                                   
 - Merged ls1012ardb TFA boot support patches                                   
 - Removed extra CONFIG_TFABOOT flag usage

 board/freescale/ls1012ardb/ls1012ardb.c | 16 ++++++-
 configs/ls1012ardb_tfa_defconfig        | 56 +++++++++++++++++++++++++
 include/configs/ls1012a_common.h        | 16 ++++++-
 include/configs/ls1012ardb.h            |  6 +++
 4 files changed, 92 insertions(+), 2 deletions(-)
 create mode 100644 configs/ls1012ardb_tfa_defconfig

diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
index 888f8500d4..f648a9040b 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -87,8 +87,19 @@ int checkboard(void)
 	return 0;
 }
 
+#ifdef CONFIG_TFABOOT
 int dram_init(void)
 {
+	gd->ram_size = tfa_get_dram_size();
+	if (!gd->ram_size)
+		gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+#else
+int dram_init(void)
+{
+#ifndef CONFIG_TFABOOT
 	static const struct fsl_mmdc_info mparam = {
 		0x05180000,	/* mdctl */
 		0x00030035,	/* mdpdc */
@@ -106,6 +117,7 @@ int dram_init(void)
 	};
 
 	mmdc_init(&mparam);
+#endif
 
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
@@ -115,6 +127,7 @@ int dram_init(void)
 
 	return 0;
 }
+#endif
 
 
 int board_early_init_f(void)
@@ -132,7 +145,8 @@ int board_init(void)
 	 * Set CCI-400 control override register to enable barrier
 	 * transaction
 	 */
-	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+	if (current_el() == 3)
+		out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A010315
 	erratum_a010315();
diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig
new file mode 100644
index 0000000000..e594bd6b21
--- /dev/null
+++ b/configs/ls1012ardb_tfa_defconfig
@@ -0,0 +1,56 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 787adbc382..324dba2b7e 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -16,7 +16,11 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR                CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 
 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
@@ -34,7 +38,7 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
 
 /*SPI device */
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_TFABOOT)
 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 #define CONFIG_SYS_FMAN_FW_ADDR		0x400d0000
 #define CONFIG_ENV_SPI_BUS		0
@@ -58,7 +62,11 @@
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_ENV_SIZE			0x40000          /* 256KB */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_ENV_OFFSET		0x500000        /* 5MB */
+#else
 #define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
+#endif
 #define CONFIG_ENV_SECT_SIZE		0x40000
 #endif
 
@@ -106,9 +114,15 @@
 	"kernel_size=0x2800000\0"		\
 
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
+				"$kernel_start $kernel_size && "\
+				"bootm $kernel_load"
+#else
 #define CONFIG_BOOTCOMMAND	"pfe stop; sf probe 0:0; sf read $kernel_load "\
 				"$kernel_start $kernel_size && "\
 				"bootm $kernel_load"
+#endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index 17554ea955..f149a604cf 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -112,8 +112,14 @@
 		"bootm $load_addr#$board\0"
 
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+			     "env exists secureboot && esbc_halt;"
+#else
 #define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
 			   "env exists secureboot && esbc_halt;"
+#endif
 
 #include <asm/fsl_secure_boot.h>
 
-- 
2.17.1



More information about the U-Boot mailing list