[U-Boot] [PATCH] arm: ls1021a: Add timer_init() in board_init_f for SPL

[Alison Wang]

I2C is used to access DDR SPD in the DDR initialization for SPL. In
i2c_write process, get_timer() will be called. In board_init_f for SPL,
timer_init() is not called before. The system counter is not enabled and
the counter frequency is not set to 12.5MHz in SPL. The parameters for
do_div() are zero too.

It could not be found until CONFIG_USE_PRIVATE_LIBGCC is enabled in
default. When CONFIG_USE_PRIVATE_LIBGCC is enabled, U-Boot will use its
own set of libgcc functions. As the parameters for do_div() are zero,
__div0 will be called. Then the processor will stay in an endless loop
after calling hang().

This patch will add timer_init() in board_init_f for SPL and fix a
series of issues it caused.

Signed-off-by: Alison Wang <alison.wang at nxp.com>
---
 board/freescale/ls1021aqds/ls1021aqds.c |    1 +
 board/freescale/ls1021atwr/ls1021atwr.c |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index c828dac..c08be1e 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -244,6 +244,7 @@ void board_init_f(ulong dummy)
 	if (major == SOC_MAJOR_VER_1_0)
 		out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
 
+	timer_init();
 	dram_init();
 
 	/* Allow OCRAM access permission as R/W */
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index dcd6d93..beb82ce 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -467,6 +467,7 @@ void board_init_f(ulong dummy)
 
 	preloader_console_init();
 
+	timer_init();
 	dram_init();
 
 	/* Allow OCRAM access permission as R/W */
-- 
1.7.1