[U-Boot] [PATCH v5 26/27] armv8: ls1012aqds: Add TFABOOT support
Rajesh Bhagat
rajesh.bhagat at nxp.com
Sat Oct 27 13:16:48 UTC 2018
TFABOOT support includes:
- ls1012aqds_tfa_defconfig to be loaded by trusted firmware
- environment address and size changes for TFABOOT
- define BOOTCOMMAND for TFABOOT
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
Signed-off-by: Vinitha V Pillai <vinitha.pillai at nxp.com>
Signed-off-by: Pankit Garg <pankit.garg at nxp.com>
---
Change in v5: None
Change in v4: None
Change in v3:
- Added ls1012aqds_tfa_SECURE_BOOT_defconfig
Change in v2:
- Merged ls1012aqds TFA boot support patches
- Removed extra CONFIG_TFABOOT flag usage
board/freescale/ls1012aqds/MAINTAINERS | 2 +
board/freescale/ls1012aqds/ls1012aqds.c | 17 ++++-
configs/ls1012aqds_tfa_SECURE_BOOT_defconfig | 65 ++++++++++++++++++++
configs/ls1012aqds_tfa_defconfig | 62 +++++++++++++++++++
4 files changed, 143 insertions(+), 3 deletions(-)
create mode 100644 configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
create mode 100644 configs/ls1012aqds_tfa_defconfig
diff --git a/board/freescale/ls1012aqds/MAINTAINERS b/board/freescale/ls1012aqds/MAINTAINERS
index 27c4affd30..2dcc22a485 100644
--- a/board/freescale/ls1012aqds/MAINTAINERS
+++ b/board/freescale/ls1012aqds/MAINTAINERS
@@ -1,6 +1,8 @@
LS1012AQDS BOARD
M: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
+M: Rajesh Bhagat <rajesh.bhagat at nxp.com>
S: Maintained
F: board/freescale/ls1012aqds/
F: include/configs/ls1012aqds.h
F: configs/ls1012aqds_qspi_defconfig
+F: configs/ls1012aqds_tfa_defconfig
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
index 3a1c2351c4..a862fe6a93 100644
--- a/board/freescale/ls1012aqds/ls1012aqds.c
+++ b/board/freescale/ls1012aqds/ls1012aqds.c
@@ -57,6 +57,16 @@ int checkboard(void)
return 0;
}
+#ifdef CONFIG_TFABOOT
+int dram_init(void)
+{
+ gd->ram_size = tfa_get_dram_size();
+ if (!gd->ram_size)
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+ return 0;
+}
+#else
int dram_init(void)
{
static const struct fsl_mmdc_info mparam = {
@@ -76,7 +86,6 @@ int dram_init(void)
};
mmdc_init(&mparam);
-
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
/* This will break-before-make MMU for DDR */
@@ -85,6 +94,7 @@ int dram_init(void)
return 0;
}
+#endif
int board_early_init_f(void)
{
@@ -112,8 +122,9 @@ int board_init(void)
/* Set CCI-400 control override register to enable barrier
* transaction */
- out_le32(&cci->ctrl_ord,
- CCI400_CTRLORD_EN_BARRIER);
+ if (current_el() == 3)
+ out_le32(&cci->ctrl_ord,
+ CCI400_CTRLORD_EN_BARRIER);
#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
erratum_a010315();
diff --git a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
new file mode 100644
index 0000000000..8087825bec
--- /dev/null
+++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
@@ -0,0 +1,65 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AQDS=y
+CONFIG_SECURE_BOOT=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_TFABOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_EEPROM=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_DATE=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_DM_ETH=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_FSL_PFE=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SCSI=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_RSA=y
+CONFIG_RSA_SOFTWARE_EXP=y
diff --git a/configs/ls1012aqds_tfa_defconfig b/configs/ls1012aqds_tfa_defconfig
new file mode 100644
index 0000000000..39805ccf9e
--- /dev/null
+++ b/configs/ls1012aqds_tfa_defconfig
@@ -0,0 +1,62 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AQDS=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_EEPROM=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_DATE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-qds"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SCSI=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
--
2.17.1
More information about the U-Boot
mailing list