[U-Boot] [PATCH 2/3] net: phy: aquantia: add firmware loading support

[Prabhakar Kushwaha]

> -----Original Message-----
> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Jeremy
> Gebben
> Sent: Wednesday, September 19, 2018 3:20 AM
> To: u-boot at lists.denx.de
> Cc: Joe Hershberger <joe.hershberger at ni.com>; Shaohui Xie
> <Shaohui.Xie at freescale.com>; York Sun <yorksun at freescale.com>
> Subject: [U-Boot] [PATCH 2/3] net: phy: aquantia: add firmware loading
> support
> 
> Aquantia phys have firmware that can be loaded automatically from storage
> directly attached to the phy or via MDIO commands.
> Add support for loading firmware from either a file or a raw location on an
> MMC device.
> 
  We  have integrated your patch series.  Now we have one AQR FW:  AQR-G3_v4.2.C-AQR.cld
How to flash this FW on Aquantia card ?  
When my u-boot will boot, does Firmware programming process will trigger by itself or do we need to execute some command on u-boot prompt ?      

--pk