[U-Boot] [PATCH] riscv: ax25-ae350: Pass dtb address to u-boot with a1 register

[Bin Meng]

Hi Rick,

On Thu, Oct 25, 2018 at 11:11 AM Rick Chen <rickchen36 at gmail.com> wrote:
>
> Bin Meng <bmeng.cn at gmail.com> 於 2018年10月25日 週四 上午10:33寫道：
> >
> > Hi Rick,
> >
> > On Thu, Oct 25, 2018 at 9:20 AM Andes <uboot at andestech.com> wrote:
> > >
> > > From: Rick Chen <rick at andestech.com>
> > >
> > > ax25-ae350 use CONFIG_OF_BOARD which allow the board to
> > > override the fdt address. And prior_stage_fdt_address offer
> > > a temporary memory address to keep the dtb address which was
> > > passed from loader(gdb) to u-boot with a1.
> >
> > nits: U-Boot
> >
> > >
> > > Signed-off-by: Rick Chen <rick at andestech.com>
> > > Cc: Greentime Hu <greentime at andestech.com>
> > > ---
> > >  board/AndesTech/ax25-ae350/ax25-ae350.c | 3 ++-
> > >  1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c b/board/AndesTech/ax25-ae350/ax25-ae350.c
> > > index 5f4ca0f..d343453 100644
> > > --- a/board/AndesTech/ax25-ae350/ax25-ae350.c
> > > +++ b/board/AndesTech/ax25-ae350/ax25-ae350.c
> > > @@ -14,6 +14,7 @@
> > >
> > >  DECLARE_GLOBAL_DATA_PTR;
> > >
> > > +extern phys_addr_t prior_stage_fdt_address;
> > >  /*
> > >   * Miscellaneous platform dependent initializations
> > >   */
> > > @@ -66,7 +67,7 @@ ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
> > >
> > >  void *board_fdt_blob_setup(void)
> > >  {
> > > -       void **ptr = (void *)CONFIG_SYS_SDRAM_BASE;
> > > +       void **ptr = (void *)&prior_stage_fdt_address;
> > >         if (fdt_magic(*ptr) == FDT_MAGIC)
> > >                         return (void *)*ptr;
> > >
> > > --
> >
> > board_fdt_blob_setup() should be completely removed. Instead the
> > simple fix should be add CONFIG_OF_PRIOR_STAGE to your board defconfig
> > files.
> >
>
> Hi Bin
>
> I have tried to switch from CONFIG_OF_BOARD to CONFIG_OF_PRIOR_STAGE.
>
> But it will lost the function
> that dtb will be pre-burned into designated flash location,
> when U-Boot was booting from flash.
>

I don't get it. Do you mean on ae350 board, the DTB is pre-flashed on the flash?

> How can I achieve that with CONFIG_OF_PRIOR_STAGE ?

Regards,
Bin