[U-Boot] [PATCH] ARM: mvebu: dts: add Clearfog GT-8K
Baruch Siach
baruch at tkos.co.il
Thu Oct 18 11:51:54 UTC 2018
From: Rabeeh Khoury <rabeeh at solid-run.com>
The SolidRun Clearfog GT-8K is based on Armada 8040.
https://wiki.solid-run.com/doku.php?id=products:a8040:clearfoggt8k
Signed-off-by: Rabeeh Khoury <rabeeh at solid-run.com>
Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armada-8040-clearfog-gt-8k.dts | 315 ++++++++++++++++++++
2 files changed, 316 insertions(+)
create mode 100644 arch/arm/dts/armada-8040-clearfog-gt-8k.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 44ebc50bfab1..c9a23ea68450 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -99,6 +99,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \
armada-7040-db-nand.dtb \
armada-8040-db.dtb \
armada-8040-mcbin.dtb \
+ armada-8040-clearfog-gt-8k.dtb \
armada-xp-gp.dtb \
armada-xp-maxbcm.dtb \
armada-xp-synology-ds414.dtb \
diff --git a/arch/arm/dts/armada-8040-clearfog-gt-8k.dts b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
new file mode 100644
index 000000000000..015ef35b0d81
--- /dev/null
+++ b/arch/arm/dts/armada-8040-clearfog-gt-8k.dts
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 SolidRun ltd
+ */
+
+#include "armada-8040.dtsi"
+
+/ {
+ model = "ClearFog-GT-8K";
+ compatible = "solidrun,armada8040-cf-gt-8k",
+ "marvell,armada8040";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cpm_i2c0;
+ i2c1 = &cpm_i2c1;
+ spi0 = &cps_spi1;
+ };
+
+ memory at 00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ simple-bus {
+ compatible = "simple-bus";
+
+ reg_usb3h0_vbus: usb3-vbus0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_xhci_vbus_pins>;
+ regulator-name = "reg-usb3h0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <300000>;
+ shutdown-delay-us = <500000>;
+ regulator-force-boot-off;
+ gpio = <&cpm_gpio1 15 GPIO_ACTIVE_LOW>; /* GPIO[47] */
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&ap_pinctl {
+ /*
+ * MPP Bus:
+ * eMMC [0-10]
+ * UART0 [11,19]
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 1 1 1 1 1 1 1 1 1 1
+ 1 3 0 0 0 0 0 0 0 3 >;
+};
+
+/* on-board eMMC */
+&ap_sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_emmc_pins>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&cpm_pinctl {
+ /*
+ * MPP Bus:
+ * [0-31] = 0xff: Keep default CP0_shared_pins:
+ * [11] CLKOUT_MPP_11 (out)
+ * [23] LINK_RD_IN_CP2CP (in)
+ * [25] CLKOUT_MPP_25 (out)
+ * [29] AVS_FB_IN_CP2CP (in)
+ * [32, 33, 34] pci0/1/2 reset
+ * [35-38] CP0 I2C1 and I2C0
+ * [39] GPIO reset button
+ * [40,41] LED0 and LED1
+ * [43] 1512 phy reset
+ * [47] USB VBUS EN (active low)
+ * [48] FAN PWM
+ * [49] SFP+ present signal
+ * [50] TPM interrupt
+ * [51] WLAN0 disable
+ * [52] WLAN1 disable
+ * [53] LTE disable
+ * [54] NFC reset
+ * [55] Micro SD card detect
+ * [56-61] Micro SD
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0 0 0 0 2 2 2 2 0
+ 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0xe 0xe 0xe 0xe
+ 0xe 0xe 0 >;
+
+ cpm_xhci_vbus_pins: cpm-xhci-vbus-pins {
+ marvell,pins = < 47 >;
+ marvell,function = <0>;
+ };
+
+ cps_1g_phy_reset: cps-1g-phy-reset {
+ marvell,pins = < 43 >;
+ marvell,function = <0>;
+ };
+};
+
+/* uSD slot */
+&cpm_sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_sdhci_pins>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&cpm_pcie0 {
+ num-lanes = <1>;
+ status = "okay";
+};
+
+&cpm_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cpm_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c1_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cpm_sata0 {
+ status = "okay";
+};
+
+&cpm_comphy {
+ /*
+ * CP0 Serdes Configuration:
+ * Lane 0: PCIe0 (x1)
+ * Lane 1: Not connected
+ * Lane 2: SFI (10G)
+ * Lane 3: Not connected
+ * Lane 4: USB 3.0 host port1 (can be PCIe)
+ * Lane 5: Not connected
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_UNCONNECTED>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_SFI>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_UNCONNECTED>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_USB3_HOST1>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_UNCONNECTED>;
+ };
+};
+
+&cpm_ethernet {
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+/* 10G SFI SFP */
+&cpm_eth0 {
+ status = "okay";
+ phy-mode = "sfi";
+};
+
+&cps_sata0 {
+ status = "okay";
+};
+
+&cps_usb3_0 {
+ vbus-supply = <®_usb3h0_vbus>;
+ status = "okay";
+};
+
+&cps_utmi0 {
+ status = "okay";
+};
+
+&cps_pinctl {
+ /*
+ * MPP Bus:
+ * [0-5] TDM
+ * [6] VHV Enable
+ * [7] CP1 SPI0 CSn1 (FXS)
+ * [8] CP1 SPI0 CSn0 (TPM)
+ * [9.11]CP1 SPI0 MOSI/MISO/CLK
+ * [13] CP1 SPI1 MISO (TDM and SPI ROM shared)
+ * [14] CP1 SPI1 CS0n (64Mb SPI ROM)
+ * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared)
+ * [16] CP1 SPI1 CLK (TDM and SPI ROM shared)
+ * [24] Topaz switch reset
+ * [26] Buzzer
+ * [27] CP1 SMI MDIO
+ * [28] CP1 SMI MDC
+ * [29] CP0 10G SFP TX Disable
+ * [30] WPS button
+ * [31] Front panel button
+ * [32-62] = 0xff: Keep default CP1_shared_pins:
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0x4 0x4 0x4 0x4 0x4 0x4 0x0 0x4 0x4 0x4
+ 0x4 0x4 0x0 0x3 0x3 0x3 0x3 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0x0 0xff 0x0 0x8 0x8 0x0
+ 0x0 0x0 0x0 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0xff 0xff 0xff>;
+};
+
+&cps_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cps_spi1_pins>;
+ status = "okay";
+
+ spi-flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0 0x200000>;
+ };
+ partition at 200000 {
+ label = "Filesystem";
+ reg = <0x200000 0xce0000>;
+ };
+ };
+ };
+};
+
+&cps_comphy {
+ /*
+ * CP1 Serdes Configuration:
+ * Lane 0: SATA 1 (RX swapped). Can be PCIe0
+ * Lane 1: Not used
+ * Lane 2: USB HOST 0
+ * Lane 3: SGMII1 - Connected to 1512 port
+ * Lane 4: Not used
+ * Lane 5: SGMII2 - Connected to Topaz switch
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_SATA1>;
+ phy-invert = <PHY_POLARITY_RXD_INVERT>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_UNCONNECTED>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_USB3_HOST0>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_SGMII1>;
+ phy-speed = <PHY_SPEED_1_25G>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_UNCONNECTED>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_SGMII2>;
+ phy-speed = <PHY_SPEED_3_125G>;
+ };
+};
+
+&cps_mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+};
+
+&cps_ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cps_1g_phy_reset>;
+ status = "okay";
+};
+
+/* 1G SGMII */
+&cps_eth1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy = <&phy0>;
+ phy-reset-gpios = <&cpm_gpio1 11 GPIO_ACTIVE_LOW>;
+};
+
+/* 2.5G to Topaz switch */
+&cps_eth2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy-speed = <2500>;
+ phy-reset-gpios = <&cps_gpio0 24 GPIO_ACTIVE_LOW>;
+};
--
2.19.1
More information about the U-Boot
mailing list