[U-Boot] [PATCH 23/30] riscv: do not blindly modify the mstatus CSR

[Lukas Auer]

The mstatus CSR includes WPRI (writes preserve values, reads ignore
values) fields and must therefore not be set to zero without preserving
these fields. It is not apparent why mstatus is set to zero here since
it is not required for u-boot to run. Remove it.

This instruction and others encode zero as an immediate.  RISC-V has the
zero register for this purpose. Replace the immediates with the zero
register.

Signed-off-by: Lukas Auer <lukas.auer at aisec.fraunhofer.de>
---

 arch/riscv/cpu/start.S | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index 851a1d0870..4fa663c6d6 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -36,9 +36,9 @@
 _start:
 	la	t0, trap_entry
 	csrw	mtvec, t0
-	csrwi	mstatus, 0
-	csrwi	mie, 0
 
+	/* mask all interrupts */
+	csrw	mie, zero
 
 /*
  * Set stackpointer in internal/ex RAM to call board_init_f
@@ -159,11 +159,10 @@ clear_bss:
 	add	t0, t0, t6		/* t0 <- rel __bss_start in RAM */
 	la	t1, __bss_end		/* t1 <- rel __bss_end in FLASH */
 	add	t1, t1, t6		/* t1 <- rel __bss_end in RAM */
-	li	t2, 0x00000000		/* clear */
 	beq	t0, t1, call_board_init_r
 
 clbss_l:
-	SREG	t2, 0(t0)		/* clear loop... */
+	SREG	zero, 0(t0)		/* clear loop... */
 	addi	t0, t0, REGBYTES
 	bne	t0, t1, clbss_l
 
-- 
2.17.2