[U-Boot] [PATCH v3 07/19] am335x: Register the I2C controllers if DM_I2C is used.
Jean-Jacques Hiblot
jjhiblot at ti.com
Mon Oct 22 14:12:45 UTC 2018
If DM_I2C is used , the I2C controllers must be registered as U_BOOT_DEVICE
because OF_CONTROL is not used in the SPL.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---
Changes in v3: None
Changes in v2: None
arch/arm/mach-omap2/am33xx/board.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
index f5f2bd5..c121f27 100644
--- a/arch/arm/mach-omap2/am33xx/board.c
+++ b/arch/arm/mach-omap2/am33xx/board.c
@@ -19,6 +19,7 @@
#include <asm/arch/ddr_defs.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/i2c.h>
#include <asm/arch/mem.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
@@ -93,6 +94,20 @@ U_BOOT_DEVICES(am33xx_uarts) = {
# endif
};
+#ifdef CONFIG_DM_I2C
+static const struct omap_i2c_platdata am33xx_i2c[] = {
+ { I2C_BASE1, 100000, OMAP_I2C_REV_V2},
+ { I2C_BASE2, 100000, OMAP_I2C_REV_V2},
+ { I2C_BASE3, 100000, OMAP_I2C_REV_V2},
+};
+
+U_BOOT_DEVICES(am33xx_i2c) = {
+ { "i2c_omap", &am33xx_i2c[0] },
+ { "i2c_omap", &am33xx_i2c[1] },
+ { "i2c_omap", &am33xx_i2c[2] },
+};
+#endif
+
#ifdef CONFIG_DM_GPIO
static const struct omap_gpio_platdata am33xx_gpio[] = {
{ 0, AM33XX_GPIO0_BASE },
--
2.7.4
More information about the U-Boot
mailing list