[U-Boot] [PATCH v2 8/8] timer: Sort Kconfig driver entries

[Bin Meng]

This is currently out of order. Sort it.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>

---

Changes in v2: None

 drivers/timer/Kconfig | 110 +++++++++++++++++++++++++-------------------------
 1 file changed, 55 insertions(+), 55 deletions(-)

diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig
index a7d600b..8c0f356 100644
--- a/drivers/timer/Kconfig
+++ b/drivers/timer/Kconfig
@@ -37,6 +37,12 @@ config TIMER_EARLY
 	  use an early timer. These functions must be supported by your timer
 	  driver: timer_early_get_count() and timer_early_get_rate().
 
+config AG101P_TIMER
+	bool "AG101P timer support"
+	depends on TIMER && NDS32
+	help
+	  Select this to enable a timer for AG01P devices.
+
 config ALTERA_TIMER
 	bool "Altera timer support"
 	depends on TIMER
@@ -44,6 +50,34 @@ config ALTERA_TIMER
 	  Select this to enable a timer for Altera devices. Please find
 	  details on the "Embedded Peripherals IP User Guide" of Altera.
 
+config ARC_TIMER
+	bool "ARC timer support"
+	depends on TIMER && ARC && CLK
+	help
+	  Select this to enable built-in ARC timers.
+	  ARC cores may have up to 2 built-in timers: timer0 and timer1,
+	  usually at least one of them exists. Either of them is supported
+	  in U-Boot.
+
+config AST_TIMER
+	bool "Aspeed ast2400/ast2500 timer support"
+	depends on TIMER
+	default y if ARCH_ASPEED
+	help
+	  Select this to enable timer for Aspeed ast2400/ast2500 devices.
+	  This is a simple sys timer driver, it is compatible with lib/time.c,
+	  but does not support any interrupts. Even though SoC has 8 hardware
+	  counters, they are all treated as a single device by this driver.
+	  This is mostly because they all share several registers which
+	  makes it difficult to completely separate them.
+
+config ATCPIT100_TIMER
+	bool "ATCPIT100 timer support"
+	depends on TIMER
+	help
+	  Select this to enable a ATCPIT100 timer which will be embedded
+	  in AE3XX, AE250 boards.
+
 config ATMEL_PIT_TIMER
 	bool "Atmel periodic interval timer support"
 	depends on TIMER
@@ -66,18 +100,12 @@ config DESIGNWARE_APB_TIMER
 	  Enables support for the Designware APB Timer driver. This timer is
 	  present on Altera SoCFPGA SoCs.
 
-config SANDBOX_TIMER
-	bool "Sandbox timer support"
-	depends on SANDBOX && TIMER
-	help
-	  Select this to enable an emulated timer for sandbox. It gets
-	  time from host os.
-
-config X86_TSC_TIMER
-	bool "x86 Time-Stamp Counter (TSC) timer support"
-	depends on TIMER && X86
+config MPC83XX_TIMER
+	bool "MPC83xx timer support"
+	depends on TIMER
 	help
-	  Select this to enable Time-Stamp Counter (TSC) timer for x86.
+	  Select this to enable support for the timer found on
+	  devices based on the MPC83xx family of SoCs.
 
 config OMAP_TIMER
 	bool "Omap timer support"
@@ -85,17 +113,19 @@ config OMAP_TIMER
 	help
 	  Select this to enable an timer for Omap devices.
 
-config AST_TIMER
-	bool "Aspeed ast2400/ast2500 timer support"
+config ROCKCHIP_TIMER
+	bool "Rockchip timer support"
 	depends on TIMER
-	default y if ARCH_ASPEED
 	help
-	  Select this to enable timer for Aspeed ast2400/ast2500 devices.
-	  This is a simple sys timer driver, it is compatible with lib/time.c,
-	  but does not support any interrupts. Even though SoC has 8 hardware
-	  counters, they are all treated as a single device by this driver.
-	  This is mostly because they all share several registers which
-	  makes it difficult to completely separate them.
+	  Select this to enable support for the timer found on
+	  Rockchip devices.
+
+config SANDBOX_TIMER
+	bool "Sandbox timer support"
+	depends on SANDBOX && TIMER
+	help
+	  Select this to enable an emulated timer for sandbox. It gets
+	  time from host os.
 
 config STI_TIMER
 	bool "STi timer support"
@@ -104,47 +134,17 @@ config STI_TIMER
 	help
 	  Select this to enable a timer for STi devices.
 
-config ARC_TIMER
-	bool "ARC timer support"
-	depends on TIMER && ARC && CLK
-	help
-	  Select this to enable built-in ARC timers.
-	  ARC cores may have up to 2 built-in timers: timer0 and timer1,
-	  usually at least one of them exists. Either of them is supported
-	  in U-Boot.
-
-config AG101P_TIMER
-	bool "AG101P timer support"
-	depends on TIMER && NDS32
-	help
-	  Select this to enable a timer for AG01P devices.
-
-config ATCPIT100_TIMER
-	bool "ATCPIT100 timer support"
-	depends on TIMER
-	help
-	  Select this to enable a ATCPIT100 timer which will be embeded
-		in AE3XX, AE250 boards.
-
-config ROCKCHIP_TIMER
-        bool "Rockchip timer support"
-	depends on TIMER
-	help
-	  Select this to enable support for the timer found on
-	  Rockchip devices.
-
 config STM32_TIMER
-        bool "STM32 timer support"
+	bool "STM32 timer support"
 	depends on TIMER
 	help
 	  Select this to enable support for the timer found on
 	  STM32 devices.
 
-config MPC83XX_TIMER
-        bool "MPC83xx timer support"
-	depends on TIMER
+config X86_TSC_TIMER
+	bool "x86 Time-Stamp Counter (TSC) timer support"
+	depends on TIMER && X86
 	help
-	  Select this to enable support for the timer found on
-	  devices based on the MPC83xx family of SoCs.
+	  Select this to enable Time-Stamp Counter (TSC) timer for x86.
 
 endmenu
-- 
2.7.4