[U-Boot] [PULL] Please pull u-boot-imx

[Peter Robinson]

Hi Stefano,
> >> a new PR. I dropped the patches causing breakages on PowerPC boards, as
> >> well as the issue on GE boards. It ran on travis successfully.
> >>
> >>
> >> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
> >>
> >>   configs: am57xx: change default board name to beagle_x15 (2018-08-26
> >> 12:26:16 -0400)
> >>
> >> are available in the Git repository at:
> >>
> >>   git://www.denx.de/git/u-boot-imx.git master
> >>
> >> for you to fetch changes up to c1d1543ebc6e1fb026d0d7ac96d865faa7567555:
> >>
> >>   mx7dsabresd: Add the qspi target to the list of supported defconfigs
> >> (2018-09-04 08:47:23 +0200)
> >>
> >> ----------------------------------------------------------------
> >> Alex Kiernan (1):
> >>       Cleanup CONFIG_BOOTDELAY on cl-som-imx7
> >>
> >> Anson Huang (3):
> >>       imx: mx7: psci: improve cpu hotplug flow
> >>       imx: mx7: add gpc initialization for low power mode
> >>       imx: mx7: add system suspend/resume support
> >>
> >> Fabio Estevam (1):
> >>       mx7dsabresd: Add the qspi target to the list of supported defconfigs
> >>
> >> Martin Kaiser (1):
> >>       watchdog: mx25: use the imx_watchdog driver for mx25
> >>
> >> Stefan Agner (2):
> >>       board: toradex: common: fail gracefully on missing NAND chip
> >>       colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
> >>
> >> Stefano Babic (1):
> >>       imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
> >>
> >> Ye Li (6):
> >>       imx: imx6sx-sdb: Enable DM QSPI driver
> >>       imx: imx6sx-sabreauto: convert to use DM QSPI driver
> >>       imx: imx7d-sdb: Add DM QSPI support
> >>       dts: imx6ul: Update alias to support DM
> >>       dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
> >>       imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
> >
> > Are you aware of any issues on some imx6 devices in 2018.09?
>
> No.
>
> > The
> > hummingboard2 (imx6q) hangs for me just after the output below, even
> > with the above PR, it works fine with a imx6sx device (udoo neo). I'm
> > sure I've seen something on the list that might be related but I can't
> > find it.
>
> :-(
>
> >
> > Sorry for picking this up so late in the cycle.
>
> I can just try to test on another mx6q boar if I get enough time, but of
> course this is not a great test.

It seems like the Wandboard Quad revB I have also works fine so It
might just be a regression in the mx6cuboxi target.

P