[U-Boot] [PATCH 2/5] fix: mvebu: Add SPI parameters for environment setup

[Stefan Roese]

On 29.08.2018 15:34, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap at marvell.com>
> 
> Add definitions for CONFIG_ENV_SPI_BUS and CONFIG_ENV_SPI_CS
> to Armada-388-GP board configuration
> 
> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
> Cc: Igal Liberman <igall at marvell.com>
> Cc: Stefan Roese <sr at denx.de>
> ---
>   include/configs/db-88f6820-gp.h | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
> index ac810b0..f2aa21a 100644
> --- a/include/configs/db-88f6820-gp.h
> +++ b/include/configs/db-88f6820-gp.h
> @@ -28,6 +28,12 @@
>   #define CONFIG_SYS_I2C_SLAVE		0x0
>   #define CONFIG_SYS_I2C_SPEED		100000
>   
> +/*
> + * SPI Flash configuration for the environemnt access
> + */
> +#define CONFIG_ENV_SPI_BUS		0
> +#define CONFIG_ENV_SPI_CS		0
> +
>   /* SPI NOR flash default params, used by sf commands */
>   #define CONFIG_SF_DEFAULT_SPEED		1000000
>   #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
> 

Applied to u-boot-marvell/master

Thanks,
Stefan