[U-Boot] [PATCH v2 0/7] [RESEND] Improvements for the dwc3_generic driver

[Jean-Jacques Hiblot]

On 21/09/2018 10:50, Lukasz Majewski wrote:
> Hi Jean-Jacques,
>
>> Hi Marek,
>>
>> I haven't heard of you on this series.
>>
>> It is already a resend and has been tested on 2 platforms (zcu100 and
>> dra7/am57).
>>
>> Can you please consider it for inclusion?
> This is not Marek to blame for the delay - I had some non open source
> tasks to finish (and I do apologise for this situation).
Thanks. I am not blaming anyone. I just wanted to make sure that this 
wasn't lost in limbo.

>
> Your patches are now under build testing on travis-CI:
> https://travis-ci.org/lmajewski/u-boot-dfu/builds/431388980
>
> I will send the PR after CI finish.
>
>> Thanks,
>>
>> JJ
>>
>>
>>
>> On 04/09/2018 15:42, Jean-Jacques Hiblot wrote:
>>> Resending this series after rebasing on top of latest u-boot.
>>>
>>> This series aims at bringing improvements to the dwc3_generic
>>> driver so that it can be used by most of the platforms using the
>>> dwc3 controller.
>>>
>>> I tested this on with DRA7 and AM57x platforms for both Peripheral
>>> and Host operations. The code to enable DM USB host & dev support
>>> for those platforms will be submitted in a separate series.
>>>
>>> Michal Simek has tested this series:
>>> " I have tested it on zcu100 with usb stick, usb to ethernet
>>> converter and also dfu.
>>> Tested-by: Michal Simek <michal.simek at xilinx.com>"
>>>
>>> Enhancements:
>>> - use separate Kconfig option for DM USB Periphal and DM USB Host.
>>> This allow platforms to keep their non-DM USB peripheral code and
>>> use the DM USB host.
>>> - fixes the bind/probe confusion in dwc3_generic. The probe is done
>>> when the USB device is first needed.
>>> - handles PHYs when in the peripheral mode. The code to handle the
>>> PHYs is shared with the host side
>>> - handles clock and reset
>>> - bind host controller to the more generic driver 'xhci-dwc3'
>>>
>>>
>>> Changes in v2:
>>> - Updated commit log
>>> - Fixed typo in thordown.c
>>> - select DM_USB_DEV by default for zynqmp platforms
>>>
>>> Jean-Jacques Hiblot (7):
>>>     usb: gadget: Do not call board_usb_xxx() directly in USB gadget
>>>       drivers
>>>     usb: introduce a separate config option for DM USB device
>>>     usb: udc: implement DM versions of
>>>       usb_gadget_initialize()/_release()/_handle_interrupt()
>>>     dwc3_generic: do not probe the USB device driver when it's bound
>>>     dwc3: move phy operation to core.c
>>>     dwc3-generic: Handle the PHYs, the clocks and the reset lines
>>>     dwc3-generic: Add select_dr_mode operation
>>>
>>>    arch/arm/Kconfig                  |   2 +
>>>    cmd/fastboot.c                    |   4 +-
>>>    cmd/rockusb.c                     |   4 +-
>>>    cmd/thordown.c                    |   4 +-
>>>    cmd/usb_gadget_sdp.c              |   4 +-
>>>    cmd/usb_mass_storage.c            |   4 +-
>>>    common/dfu.c                      |   6 +-
>>>    drivers/usb/Kconfig               |   6 ++
>>>    drivers/usb/dwc3/Kconfig          |   7 +-
>>>    drivers/usb/dwc3/core.c           |  86 +++++++++++++++-
>>>    drivers/usb/dwc3/dwc3-generic.c   | 207
>>> +++++++++++++++++++++++++++++---------
>>> drivers/usb/dwc3/ep0.c            |   1 -
>>> drivers/usb/gadget/ether.c        |  38 +------
>>> drivers/usb/gadget/udc/udc-core.c |  44 +++++++-
>>> drivers/usb/host/xhci-dwc3.c      |  93 ++---------------
>>> include/dwc3-uboot.h              |   7 ++
>>> include/linux/usb/gadget.h        |  18 ++++ 17 files changed, 351
>>> insertions(+), 184 deletions(-)
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de