[U-Boot] [PATCH 1/3] qe: kconfig: U QE kconfig

[York Sun]

On 08/09/2018 02:56 AM, Ran Wang wrote:
> add Kconfig option for U QUICC Engine.
> 
> Signed-off-by: Ran Wang <ran.wang_1 at nxp.com>
> ---
>  drivers/Kconfig    | 2 ++
>  drivers/qe/Kconfig | 8 ++++++++
>  2 files changed, 10 insertions(+)
>  create mode 100644 drivers/qe/Kconfig
> 
> diff --git a/drivers/Kconfig b/drivers/Kconfig
> index c2e813f..da2f811 100644
> --- a/drivers/Kconfig
> +++ b/drivers/Kconfig
> @@ -68,6 +68,8 @@ source "drivers/power/Kconfig"
>  
>  source "drivers/pwm/Kconfig"
>  
> +source "drivers/qe/Kconfig"
> +
>  source "drivers/ram/Kconfig"
>  
>  source "drivers/remoteproc/Kconfig"
> diff --git a/drivers/qe/Kconfig b/drivers/qe/Kconfig
> new file mode 100644
> index 0000000..e2dd2e7
> --- /dev/null
> +++ b/drivers/qe/Kconfig
> @@ -0,0 +1,8 @@
> +#
> +# QUICC Engine Drivers
> +#
> +config  U_QE
> +	bool "Enable support for U QUICC Engine"
> +	default y if ARCH_LS1021A && !SD_BOOT && !NAND_BOOT && !QSPI_BOOT
> +	help
> +	  Choose this option to add support for U QUICC Engine.
> 

Since you add Kconfig option, you should migrate all existing #define
CONFIG_U_QE to Kconfig/defconfig. So far only T102x, T1040, LS1021,
LS1043 have this option defined.

York