[U-Boot] [PATCH 1/3] qe: kconfig: U QE kconfig

[Ran Wang]

Hi York,

> -----Original Message-----
> From: York Sun
> Sent: Saturday, September 22, 2018 02:50
> To: Ran Wang <ran.wang_1 at nxp.com>; Alison Wang
> <alison.wang at nxp.com>; Sumit Garg <sumit.garg at nxp.com>
> Cc: Qiang Zhao <qiang.zhao at nxp.com>; u-boot at lists.denx.de
> Subject: Re: [PATCH 1/3] qe: kconfig: U QE kconfig
> 
> On 08/09/2018 02:56 AM, Ran Wang wrote:
> > add Kconfig option for U QUICC Engine.
> >
> > Signed-off-by: Ran Wang <ran.wang_1 at nxp.com>
> > ---
> >  drivers/Kconfig    | 2 ++
> >  drivers/qe/Kconfig | 8 ++++++++
> >  2 files changed, 10 insertions(+)
> >  create mode 100644 drivers/qe/Kconfig
> >
> > diff --git a/drivers/Kconfig b/drivers/Kconfig index c2e813f..da2f811
> > 100644
> > --- a/drivers/Kconfig
> > +++ b/drivers/Kconfig
> > @@ -68,6 +68,8 @@ source "drivers/power/Kconfig"
> >
> >  source "drivers/pwm/Kconfig"
> >
> > +source "drivers/qe/Kconfig"
> > +
> >  source "drivers/ram/Kconfig"
> >
> >  source "drivers/remoteproc/Kconfig"
> > diff --git a/drivers/qe/Kconfig b/drivers/qe/Kconfig new file mode
> > 100644 index 0000000..e2dd2e7
> > --- /dev/null
> > +++ b/drivers/qe/Kconfig
> > @@ -0,0 +1,8 @@
> > +#
> > +# QUICC Engine Drivers
> > +#
> > +config  U_QE
> > +	bool "Enable support for U QUICC Engine"
> > +	default y if ARCH_LS1021A && !SD_BOOT && !NAND_BOOT
> && !QSPI_BOOT
> > +	help
> > +	  Choose this option to add support for U QUICC Engine.
> >
> 
> Since you add Kconfig option, you should migrate all existing #define
> CONFIG_U_QE to Kconfig/defconfig. So far only T102x, T1040, LS1021,
> LS1043 have this option defined.
 
OK, will cover this in next version.

Regards,
Ran

> York