[U-Boot] [PATCH 08/48] keymile: Simplify kmtegr1, kmvect1, suvd3 configs
Mario Six
mario.six at gdsys.cc
Fri Sep 28 09:52:44 UTC 2018
The kmtegr1, kmvect1, and suvd3 boards now have separate config files,
which were all copied from the suvd3.
Unwind the #ifdef logic in these config files to only include the
options necessary for each board.
Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
include/configs/kmtegr1.h | 90 ---------------------------------------------
include/configs/kmvect1.h | 57 ----------------------------
include/configs/suvd3.h | 94 -----------------------------------------------
3 files changed, 241 deletions(-)
diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h
index 3e88c9000c..69397ae5ae 100644
--- a/include/configs/kmtegr1.h
+++ b/include/configs/kmtegr1.h
@@ -22,21 +22,6 @@
/* This needs to be set prior to including km/km83xx-common.h */
-#if defined(CONFIG_SUVD3) /* SUVD3 board specific */
-#define CONFIG_HOSTNAME "suvd3"
-#define CONFIG_KM_BOARD_NAME "suvd3"
-/* include common defines/options for all 8321 Keymile boards */
-#include "km/km8321-common.h"
-
-#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */
-#define CONFIG_HOSTNAME "kmvect1"
-#define CONFIG_KM_BOARD_NAME "kmvect1"
-/* at end of uboot partition, before env */
-#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000
-/* include common defines/options for all 8309 Keymile boards */
-#include "km/km8309-common.h"
-
-#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */
#define CONFIG_HOSTNAME "kmtegr1"
#define CONFIG_KM_BOARD_NAME "kmtegr1"
#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
@@ -55,10 +40,6 @@
/* must be after the include because KMBEC_FPGA is otherwise undefined */
#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
-#else
-#error Supported boards are: SUVD3, KMVECT1, KMTEGR1
-#endif
-
#define CONFIG_SYS_APP1_BASE 0xA0000000
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000
@@ -77,34 +58,6 @@
*
*/
-#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
-/*
- * APP1 on the local bus CS2
- */
-#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE
-#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
-
-#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \
- BR_PS_16 | \
- BR_MS_UPMA | \
- BR_V)
-#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE))
-
-#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
- BR_PS_16 | \
- BR_V)
-
-#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
- OR_GPCM_CSNT | \
- OR_GPCM_ACS_DIV4 | \
- OR_GPCM_SCY_3 | \
- OR_GPCM_TRLX_SET)
-
-#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \
- 0x0000c000 | \
- MxMR_WLFx_2X)
-
-#elif defined(CONFIG_KMTEGR1)
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
BR_PS_16 | \
BR_MS_GPCM | \
@@ -115,31 +68,16 @@
OR_GPCM_TRLX_CLEAR | \
OR_GPCM_EHTR_CLEAR)
-#endif /* CONFIG_KMTEGR1 */
-
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
/*
* MMU Setup
*/
-#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
-/* APP1: icache cacheable, but dcache-inhibit and guarded */
-#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
- BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \
- BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
- BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-
-#elif defined(CONFIG_KMTEGR1)
#define CONFIG_SYS_IBAT5L (0)
#define CONFIG_SYS_IBAT5U (0)
#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-#endif /* CONFIG_KMTEGR1 */
-
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
@@ -148,33 +86,6 @@
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
-/*
- * QE UEC ethernet configuration
- */
-#if defined(CONFIG_KMVECT1)
-#define CONFIG_MV88E6352_SWITCH
-#define CONFIG_KM_MVEXTSW_ADDR 0x10
-
-/* ethernet port connected to simple switch 88e6122 (UEC0) */
-#define CONFIG_UEC_ETH1
-#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
-#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9
-#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
-
-#define CONFIG_FIXED_PHY 0xFFFFFFFF
-#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */
-#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
- {devnum, speed, duplex}
-#define CONFIG_SYS_FIXED_PHY_PORTS \
- CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
-
-#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
-#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
-#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
-#endif /* CONFIG_KMVECT1 */
-
-#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1)
/* ethernet port connected to piggy (UEC2) */
#define CONFIG_HAS_ETH1
#define CONFIG_UEC_ETH2
@@ -185,6 +96,5 @@
#define CONFIG_SYS_UEC2_PHY_ADDR 0
#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
-#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
#endif /* __CONFIG_H */
diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h
index 3e88c9000c..178e769976 100644
--- a/include/configs/kmvect1.h
+++ b/include/configs/kmvect1.h
@@ -22,13 +22,6 @@
/* This needs to be set prior to including km/km83xx-common.h */
-#if defined(CONFIG_SUVD3) /* SUVD3 board specific */
-#define CONFIG_HOSTNAME "suvd3"
-#define CONFIG_KM_BOARD_NAME "suvd3"
-/* include common defines/options for all 8321 Keymile boards */
-#include "km/km8321-common.h"
-
-#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */
#define CONFIG_HOSTNAME "kmvect1"
#define CONFIG_KM_BOARD_NAME "kmvect1"
/* at end of uboot partition, before env */
@@ -36,29 +29,6 @@
/* include common defines/options for all 8309 Keymile boards */
#include "km/km8309-common.h"
-#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */
-#define CONFIG_HOSTNAME "kmtegr1"
-#define CONFIG_KM_BOARD_NAME "kmtegr1"
-#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
-#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1"
-
-#define CONFIG_ENV_ADDR 0xF0100000
-#define CONFIG_ENV_OFFSET 0x100000
-
-#define CONFIG_NAND_ECC_BCH
-#define CONFIG_NAND_KMETER1
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
-
-/* include common defines/options for all 8309 Keymile boards */
-#include "km/km8309-common.h"
-/* must be after the include because KMBEC_FPGA is otherwise undefined */
-#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
-
-#else
-#error Supported boards are: SUVD3, KMVECT1, KMTEGR1
-#endif
-
#define CONFIG_SYS_APP1_BASE 0xA0000000
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000
@@ -77,7 +47,6 @@
*
*/
-#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
/*
* APP1 on the local bus CS2
*/
@@ -104,26 +73,12 @@
0x0000c000 | \
MxMR_WLFx_2X)
-#elif defined(CONFIG_KMTEGR1)
-#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
- BR_PS_16 | \
- BR_MS_GPCM | \
- BR_V)
-
-#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
- OR_GPCM_SCY_5 | \
- OR_GPCM_TRLX_CLEAR | \
- OR_GPCM_EHTR_CLEAR)
-
-#endif /* CONFIG_KMTEGR1 */
-
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
/*
* MMU Setup
*/
-#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
/* APP1: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
BATL_MEMCOHERENCE)
@@ -132,14 +87,6 @@
#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-
-#elif defined(CONFIG_KMTEGR1)
-#define CONFIG_SYS_IBAT5L (0)
-#define CONFIG_SYS_IBAT5U (0)
-#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
-#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-#endif /* CONFIG_KMTEGR1 */
-
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
@@ -151,7 +98,6 @@
/*
* QE UEC ethernet configuration
*/
-#if defined(CONFIG_KMVECT1)
#define CONFIG_MV88E6352_SWITCH
#define CONFIG_KM_MVEXTSW_ADDR 0x10
@@ -172,9 +118,7 @@
#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
-#endif /* CONFIG_KMVECT1 */
-#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1)
/* ethernet port connected to piggy (UEC2) */
#define CONFIG_HAS_ETH1
#define CONFIG_UEC_ETH2
@@ -185,6 +129,5 @@
#define CONFIG_SYS_UEC2_PHY_ADDR 0
#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
-#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
#endif /* __CONFIG_H */
diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h
index 3e88c9000c..2a3f7ff526 100644
--- a/include/configs/suvd3.h
+++ b/include/configs/suvd3.h
@@ -22,43 +22,11 @@
/* This needs to be set prior to including km/km83xx-common.h */
-#if defined(CONFIG_SUVD3) /* SUVD3 board specific */
#define CONFIG_HOSTNAME "suvd3"
#define CONFIG_KM_BOARD_NAME "suvd3"
/* include common defines/options for all 8321 Keymile boards */
#include "km/km8321-common.h"
-#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */
-#define CONFIG_HOSTNAME "kmvect1"
-#define CONFIG_KM_BOARD_NAME "kmvect1"
-/* at end of uboot partition, before env */
-#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000
-/* include common defines/options for all 8309 Keymile boards */
-#include "km/km8309-common.h"
-
-#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */
-#define CONFIG_HOSTNAME "kmtegr1"
-#define CONFIG_KM_BOARD_NAME "kmtegr1"
-#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
-#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1"
-
-#define CONFIG_ENV_ADDR 0xF0100000
-#define CONFIG_ENV_OFFSET 0x100000
-
-#define CONFIG_NAND_ECC_BCH
-#define CONFIG_NAND_KMETER1
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
-
-/* include common defines/options for all 8309 Keymile boards */
-#include "km/km8309-common.h"
-/* must be after the include because KMBEC_FPGA is otherwise undefined */
-#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
-
-#else
-#error Supported boards are: SUVD3, KMVECT1, KMTEGR1
-#endif
-
#define CONFIG_SYS_APP1_BASE 0xA0000000
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_APP2_BASE 0xB0000000
@@ -77,7 +45,6 @@
*
*/
-#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
/*
* APP1 on the local bus CS2
*/
@@ -104,26 +71,12 @@
0x0000c000 | \
MxMR_WLFx_2X)
-#elif defined(CONFIG_KMTEGR1)
-#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
- BR_PS_16 | \
- BR_MS_GPCM | \
- BR_V)
-
-#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
- OR_GPCM_SCY_5 | \
- OR_GPCM_TRLX_CLEAR | \
- OR_GPCM_EHTR_CLEAR)
-
-#endif /* CONFIG_KMTEGR1 */
-
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
/*
* MMU Setup
*/
-#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
/* APP1: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
BATL_MEMCOHERENCE)
@@ -132,14 +85,6 @@
#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-
-#elif defined(CONFIG_KMTEGR1)
-#define CONFIG_SYS_IBAT5L (0)
-#define CONFIG_SYS_IBAT5U (0)
-#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
-#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-#endif /* CONFIG_KMTEGR1 */
-
#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
@@ -148,43 +93,4 @@
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
-/*
- * QE UEC ethernet configuration
- */
-#if defined(CONFIG_KMVECT1)
-#define CONFIG_MV88E6352_SWITCH
-#define CONFIG_KM_MVEXTSW_ADDR 0x10
-
-/* ethernet port connected to simple switch 88e6122 (UEC0) */
-#define CONFIG_UEC_ETH1
-#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
-#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9
-#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
-
-#define CONFIG_FIXED_PHY 0xFFFFFFFF
-#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */
-#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
- {devnum, speed, duplex}
-#define CONFIG_SYS_FIXED_PHY_PORTS \
- CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
-
-#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
-#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
-#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
-#endif /* CONFIG_KMVECT1 */
-
-#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1)
-/* ethernet port connected to piggy (UEC2) */
-#define CONFIG_HAS_ETH1
-#define CONFIG_UEC_ETH2
-#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
-#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
-#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
-#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
-#define CONFIG_SYS_UEC2_PHY_ADDR 0
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
-#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
-#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
-
#endif /* __CONFIG_H */
--
2.16.4
More information about the U-Boot
mailing list