[U-Boot] [PATCH 07/48] keymile: Make distinct kmtegr1, kmvect1, suvd3 configs
Mario Six
mario.six at gdsys.cc
Fri Sep 28 09:52:43 UTC 2018
The kmtegr1, kmvect1, and suvd3 boards all use the same config include
file with lots of #ifdefs in it.
The Kconfig migation will become easier if we get rid of these #ifdefs
first.
Hence, create distinct config include files for these boards. These
configs will be copies of the suvd3 for now; we will simplify them in
another patch.
Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
arch/powerpc/cpu/mpc83xx/Kconfig | 16 +++-
board/keymile/km83xx/Kconfig | 26 ++++++
configs/kmtegr1_defconfig | 2 +-
configs/kmvect1_defconfig | 2 +-
include/configs/kmtegr1.h | 190 +++++++++++++++++++++++++++++++++++++++
include/configs/kmvect1.h | 190 +++++++++++++++++++++++++++++++++++++++
6 files changed, 421 insertions(+), 5 deletions(-)
create mode 100644 include/configs/kmtegr1.h
create mode 100644 include/configs/kmvect1.h
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index e41f4d1f9a..59e0c9a8d0 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -89,9 +89,19 @@ config TARGET_KM8360
config TARGET_SUVD3
bool "Support suvd3"
- select ARCH_MPC8309 if SYS_EXTRA_OPTIONS="KMTEGR1"
- select ARCH_MPC8309 if SYS_EXTRA_OPTIONS="KMVECT1"
- select ARCH_MPC832X if SYS_EXTRA_OPTIONS="SUVD3"
+ select ARCH_MPC832X
+ imply CMD_CRAMFS
+ imply FS_CRAMFS
+
+config TARGET_KMVECT1
+ bool "Support kmvect1"
+ select ARCH_MPC8309
+ imply CMD_CRAMFS
+ imply FS_CRAMFS
+
+config TARGET_KMTEGR1
+ bool "Support kmtegr1"
+ select ARCH_MPC8309
imply CMD_CRAMFS
imply FS_CRAMFS
diff --git a/board/keymile/km83xx/Kconfig b/board/keymile/km83xx/Kconfig
index d6c594c96a..d52ee9117b 100644
--- a/board/keymile/km83xx/Kconfig
+++ b/board/keymile/km83xx/Kconfig
@@ -11,6 +11,32 @@ config SYS_CONFIG_NAME
endif
+if TARGET_KMVECT1
+
+config SYS_BOARD
+ default "km83xx"
+
+config SYS_VENDOR
+ default "keymile"
+
+config SYS_CONFIG_NAME
+ default "kmvect1"
+
+endif
+
+if TARGET_KMTEGR1
+
+config SYS_BOARD
+ default "km83xx"
+
+config SYS_VENDOR
+ default "keymile"
+
+config SYS_CONFIG_NAME
+ default "kmtegr1"
+
+endif
+
if TARGET_SUVD3
config SYS_BOARD
diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig
index a3325a7662..528380a110 100644
--- a/configs/kmtegr1_defconfig
+++ b/configs/kmtegr1_defconfig
@@ -1,7 +1,7 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
CONFIG_MPC83xx=y
-CONFIG_TARGET_SUVD3=y
+CONFIG_TARGET_KMTEGR1=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="KMTEGR1"
diff --git a/configs/kmvect1_defconfig b/configs/kmvect1_defconfig
index 927ef9d56e..94bd6ce055 100644
--- a/configs/kmvect1_defconfig
+++ b/configs/kmvect1_defconfig
@@ -1,7 +1,7 @@
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xF0000000
CONFIG_MPC83xx=y
-CONFIG_TARGET_SUVD3=y
+CONFIG_TARGET_KMVECT1=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="KMVECT1"
diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h
new file mode 100644
index 0000000000..3e88c9000c
--- /dev/null
+++ b/include/configs/kmtegr1.h
@@ -0,0 +1,190 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu at freescale.com>
+ *
+ * Copyright (C) 2007 Logic Product Development, Inc.
+ * Peter Barada <peterb at logicpd.com>
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <avorontsov at ru.mvista.com>
+ *
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+
+/* This needs to be set prior to including km/km83xx-common.h */
+
+#if defined(CONFIG_SUVD3) /* SUVD3 board specific */
+#define CONFIG_HOSTNAME "suvd3"
+#define CONFIG_KM_BOARD_NAME "suvd3"
+/* include common defines/options for all 8321 Keymile boards */
+#include "km/km8321-common.h"
+
+#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */
+#define CONFIG_HOSTNAME "kmvect1"
+#define CONFIG_KM_BOARD_NAME "kmvect1"
+/* at end of uboot partition, before env */
+#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+
+#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */
+#define CONFIG_HOSTNAME "kmtegr1"
+#define CONFIG_KM_BOARD_NAME "kmtegr1"
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
+#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1"
+
+#define CONFIG_ENV_ADDR 0xF0100000
+#define CONFIG_ENV_OFFSET 0x100000
+
+#define CONFIG_NAND_ECC_BCH
+#define CONFIG_NAND_KMETER1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+/* must be after the include because KMBEC_FPGA is otherwise undefined */
+#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
+
+#else
+#error Supported boards are: SUVD3, KMVECT1, KMTEGR1
+#endif
+
+#define CONFIG_SYS_APP1_BASE 0xA0000000
+#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
+#define CONFIG_SYS_APP2_BASE 0xB0000000
+#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/*
+ * Init Local Bus Memory Controller:
+ *
+ * Bank Bus Machine PortSz Size Device
+ * ---- --- ------- ------ ----- ------
+ * 2 Local UPMA 16 bit 256MB APP1
+ * 3 Local GPCM 16 bit 256MB APP2
+ *
+ */
+
+#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
+/*
+ * APP1 on the local bus CS2
+ */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE
+#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
+
+#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \
+ BR_PS_16 | \
+ BR_MS_UPMA | \
+ BR_V)
+#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE))
+
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
+ BR_PS_16 | \
+ BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+ OR_GPCM_CSNT | \
+ OR_GPCM_ACS_DIV4 | \
+ OR_GPCM_SCY_3 | \
+ OR_GPCM_TRLX_SET)
+
+#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \
+ 0x0000c000 | \
+ MxMR_WLFx_2X)
+
+#elif defined(CONFIG_KMTEGR1)
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
+ BR_PS_16 | \
+ BR_MS_GPCM | \
+ BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+ OR_GPCM_SCY_5 | \
+ OR_GPCM_TRLX_CLEAR | \
+ OR_GPCM_EHTR_CLEAR)
+
+#endif /* CONFIG_KMTEGR1 */
+
+#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
+#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
+
+/*
+ * MMU Setup
+ */
+#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
+/* APP1: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+
+#elif defined(CONFIG_KMTEGR1)
+#define CONFIG_SYS_IBAT5L (0)
+#define CONFIG_SYS_IBAT5U (0)
+#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+#endif /* CONFIG_KMTEGR1 */
+
+#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
+
+/*
+ * QE UEC ethernet configuration
+ */
+#if defined(CONFIG_KMVECT1)
+#define CONFIG_MV88E6352_SWITCH
+#define CONFIG_KM_MVEXTSW_ADDR 0x10
+
+/* ethernet port connected to simple switch 88e6122 (UEC0) */
+#define CONFIG_UEC_ETH1
+#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9
+#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
+
+#define CONFIG_FIXED_PHY 0xFFFFFFFF
+#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */
+#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
+ {devnum, speed, duplex}
+#define CONFIG_SYS_FIXED_PHY_PORTS \
+ CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
+
+#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
+#endif /* CONFIG_KMVECT1 */
+
+#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1)
+/* ethernet port connected to piggy (UEC2) */
+#define CONFIG_HAS_ETH1
+#define CONFIG_UEC_ETH2
+#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
+#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
+#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR 0
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
+#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h
new file mode 100644
index 0000000000..3e88c9000c
--- /dev/null
+++ b/include/configs/kmvect1.h
@@ -0,0 +1,190 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu at freescale.com>
+ *
+ * Copyright (C) 2007 Logic Product Development, Inc.
+ * Peter Barada <peterb at logicpd.com>
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <avorontsov at ru.mvista.com>
+ *
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+
+/* This needs to be set prior to including km/km83xx-common.h */
+
+#if defined(CONFIG_SUVD3) /* SUVD3 board specific */
+#define CONFIG_HOSTNAME "suvd3"
+#define CONFIG_KM_BOARD_NAME "suvd3"
+/* include common defines/options for all 8321 Keymile boards */
+#include "km/km8321-common.h"
+
+#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */
+#define CONFIG_HOSTNAME "kmvect1"
+#define CONFIG_KM_BOARD_NAME "kmvect1"
+/* at end of uboot partition, before env */
+#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+
+#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */
+#define CONFIG_HOSTNAME "kmtegr1"
+#define CONFIG_KM_BOARD_NAME "kmtegr1"
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
+#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1"
+
+#define CONFIG_ENV_ADDR 0xF0100000
+#define CONFIG_ENV_OFFSET 0x100000
+
+#define CONFIG_NAND_ECC_BCH
+#define CONFIG_NAND_KMETER1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+/* must be after the include because KMBEC_FPGA is otherwise undefined */
+#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
+
+#else
+#error Supported boards are: SUVD3, KMVECT1, KMTEGR1
+#endif
+
+#define CONFIG_SYS_APP1_BASE 0xA0000000
+#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
+#define CONFIG_SYS_APP2_BASE 0xB0000000
+#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/*
+ * Init Local Bus Memory Controller:
+ *
+ * Bank Bus Machine PortSz Size Device
+ * ---- --- ------- ------ ----- ------
+ * 2 Local UPMA 16 bit 256MB APP1
+ * 3 Local GPCM 16 bit 256MB APP2
+ *
+ */
+
+#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
+/*
+ * APP1 on the local bus CS2
+ */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE
+#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
+
+#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \
+ BR_PS_16 | \
+ BR_MS_UPMA | \
+ BR_V)
+#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE))
+
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
+ BR_PS_16 | \
+ BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+ OR_GPCM_CSNT | \
+ OR_GPCM_ACS_DIV4 | \
+ OR_GPCM_SCY_3 | \
+ OR_GPCM_TRLX_SET)
+
+#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \
+ 0x0000c000 | \
+ MxMR_WLFx_2X)
+
+#elif defined(CONFIG_KMTEGR1)
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
+ BR_PS_16 | \
+ BR_MS_GPCM | \
+ BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+ OR_GPCM_SCY_5 | \
+ OR_GPCM_TRLX_CLEAR | \
+ OR_GPCM_EHTR_CLEAR)
+
+#endif /* CONFIG_KMTEGR1 */
+
+#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
+#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
+
+/*
+ * MMU Setup
+ */
+#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1)
+/* APP1: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+
+#elif defined(CONFIG_KMTEGR1)
+#define CONFIG_SYS_IBAT5L (0)
+#define CONFIG_SYS_IBAT5U (0)
+#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
+#endif /* CONFIG_KMTEGR1 */
+
+#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
+
+/*
+ * QE UEC ethernet configuration
+ */
+#if defined(CONFIG_KMVECT1)
+#define CONFIG_MV88E6352_SWITCH
+#define CONFIG_KM_MVEXTSW_ADDR 0x10
+
+/* ethernet port connected to simple switch 88e6122 (UEC0) */
+#define CONFIG_UEC_ETH1
+#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9
+#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
+
+#define CONFIG_FIXED_PHY 0xFFFFFFFF
+#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */
+#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
+ {devnum, speed, duplex}
+#define CONFIG_SYS_FIXED_PHY_PORTS \
+ CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
+
+#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
+#endif /* CONFIG_KMVECT1 */
+
+#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1)
+/* ethernet port connected to piggy (UEC2) */
+#define CONFIG_HAS_ETH1
+#define CONFIG_UEC_ETH2
+#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
+#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
+#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR 0
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
+#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */
+
+#endif /* __CONFIG_H */
--
2.16.4
More information about the U-Boot
mailing list