[U-Boot] [PATCH v2 01/10] pinctrl: rockchip: Add pull-pin-default param and remove unused param

[David Wu]

Some Socs use the pull-pin-default config param, need to add it.

Signed-off-by: David Wu <david.wu at rock-chips.com>
---

 drivers/pinctrl/rockchip/pinctrl-rockchip-core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
index b84b079064..77ac981c40 100644
--- a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
+++ b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
@@ -509,9 +509,8 @@ static const struct pinconf_param rockchip_conf_params[] = {
 	{ "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 },
 	{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
 	{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
+	{ "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
 	{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
-	{ "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
-	{ "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 },
 	{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
 	{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
 };
-- 
2.19.1