[U-Boot] [PATCH v2 01/10] pinctrl: rockchip: Add pull-pin-default param and remove unused param

[Heiko Stuebner]

Hi David,

Am Donnerstag, 4. April 2019, 05:51:31 CEST schrieb David Wu:
> Some Socs use the pull-pin-default config param, need to add it.
> 
> Signed-off-by: David Wu <david.wu at rock-chips.com>
> ---
> 
>  drivers/pinctrl/rockchip/pinctrl-rockchip-core.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
> index b84b079064..77ac981c40 100644
> --- a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
> +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
> @@ -509,9 +509,8 @@ static const struct pinconf_param rockchip_conf_params[] = {
>  	{ "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 },
>  	{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
>  	{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
> +	{ "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
>  	{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
> -	{ "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
> -	{ "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 },

you also remove these, is that intentional ... if so the commit message
should explain it :-)

Thanks
Heiko

>  	{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
>  	{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
>  };
>