[U-Boot] [PATCH 0/4] add drive strenght and slew rate support for SAM9X60

[Eugen.Hristev at microchip.com]

On 25.03.2019 12:33, Claudiu.Beznea at microchip.com wrote:

> From: Claudiu Beznea <claudiu.beznea at microchip.com>
> 
> Hi,
> 
> This series adds support for drive strength and slew rate support for
> Microchip SAMX60's pin controller. For drive strenght we could have 2
> values: low, high. For slew rate we could have 2 values: enable, disabled.
> 
> Thank you,
> Claudiu Beznea
> 
> Claudiu Beznea (4):
>    pinctrl: at91: add option to use drive strength bits
>    pinctrl: at91: add drive strength support for SAM9X60
>    pinctrl: at91: add compatibles for SAM9X60 pin controller
>    pinctrl: at91: add slewrate support for SAM9X60
> 
>   drivers/pinctrl/pinctrl-at91.c     | 84 +++++++++++++++++++++++++++++++++++---
>   include/dt-bindings/pinctrl/at91.h |  4 ++
>   2 files changed, 83 insertions(+), 5 deletions(-)


Applied the whole series to u-boot-atmel/next

Thanks !