[U-Boot] rk3288 SPL size

[Jonathan Gray]

On Tue, Apr 16, 2019 at 04:49:12PM +1000, Jonathan Gray wrote:
> On Fri, Apr 05, 2019 at 12:10:21PM +0200, Wadim Egorov wrote:
> > Hi,
> > 
> > it seems the new common rockchip pinctrl driver does not really fit into
> > our phycore-rk3288 SPL setup. It works for every other rk3288 based
> > board because they don't need special power configurations at the SPL stage.
> 
> It turns out tinker-rk3288 SPL no longer fits in 2019.04 and previously
> worked fine in 2019.01.
> 
> Warning: SPL image is too large (size 0x8800) and will not boot
> Error: image verification failed
> 
> built with gcc-linaro 6.3.2017.02
> 
> bisecting led to the pinctrl changes.
> 
> with SPL_PINCTRL_ROCKCHIP disabled it fits and U-Boot output on
> serial gets as far as the efi loader then no output appears on serial
> when a kernel is loaded.

Changing the defconfig to not have CONFIG_SPL_I2C_SUPPORT=y also fits
and also still hangs on loading a kernel.