[U-Boot] [PATCH v2 2/6] net: mvpp2: Replace SMI implementation with marvell MDIO API
nhed+uboot at starry.com
nhed+uboot at starry.com
Sat Aug 3 01:53:23 UTC 2019
From: Ken Ma <make at marvell.com>
Since marvell MDIO driver is added, SMI function implementation in
mvpp2 driver can be removed and NETA driver can use marvell MDIO API
directly.
This replacement also fixes 2 old issues:
1. Each pp2 port device should have its own mdio bus field member since
some pp2 ports may use SMI mdio bus while some other pp2 ports may
use XSMI mdio bus, but the old mvpp2_base device has a shared bus
for its all pp2 ports; this patch moves mdio bus field member from
struct mvpp2 to struct mvpp2_port;
2. Old code uses mvpp2_base device name as mdio bus name, but for
Armada80x0, cp0 ethernet device and cp1 ethernet device have the
same device name - "ethernet at 0"; and because mdio_register() checks
unique name, then the second probed mvpp2_base device fails to
register mdio bus; since new marvell MDIO driver has resolved the
unique name issue - different mdio names can be set in fdt and if
a mdio name is not set, the default mdio name will be generated from
the mdio bus base address, so this issue is fixed by this
replacement.
Signed-off-by: Ken Ma <make at marvell.com>
Reviewed-on: http://vgitil04.il.marvell.com:8080/55404
Reviewed-by: Igal Liberman <igall at marvell.com>
Tested-by: Igal Liberman <igall at marvell.com>
Signed-off-by: Nevo Hed <nhed+github at starry.com>
---
drivers/net/Kconfig | 1 +
drivers/net/mvpp2.c | 158 ++++----------------------------------------
2 files changed, 13 insertions(+), 146 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5fd31b03cf..d8c4dd6f4d 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -297,6 +297,7 @@ config MVPP2
bool "Marvell Armada 375/7K/8K network interface support"
depends on ARMADA_375 || ARMADA_8K
select PHYLIB
+ select MVMDIO
help
This driver supports the network interface units in the
Marvell ARMADA 375, 7K and 8K SoCs.
diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
index f36c8236b1..b6dfed5c54 100644
--- a/drivers/net/mvpp2.c
+++ b/drivers/net/mvpp2.c
@@ -32,6 +32,7 @@
#include <linux/mbus.h>
#include <asm-generic/gpio.h>
#include <fdt_support.h>
+#include <mdio.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -62,8 +63,6 @@ do { \
#define MTU 1500
#define RX_BUFFER_SIZE (ALIGN(MTU + WRAP, ARCH_DMA_MINALIGN))
-#define MVPP2_SMI_TIMEOUT 10000
-
/* RX Fifo Registers */
#define MVPP2_RX_DATA_FIFO_SIZE_REG(port) (0x00 + 4 * (port))
#define MVPP2_RX_ATTR_FIFO_SIZE_REG(port) (0x20 + 4 * (port))
@@ -490,23 +489,8 @@ do { \
#define MVPP2_QUEUE_NEXT_DESC(q, index) \
(((index) < (q)->last_desc) ? ((index) + 1) : 0)
-/* SMI: 0xc0054 -> offset 0x54 to lms_base */
-#define MVPP21_SMI 0x0054
/* PP2.2: SMI: 0x12a200 -> offset 0x1200 to iface_base */
#define MVPP22_SMI 0x1200
-#define MVPP2_PHY_REG_MASK 0x1f
-/* SMI register fields */
-#define MVPP2_SMI_DATA_OFFS 0 /* Data */
-#define MVPP2_SMI_DATA_MASK (0xffff << MVPP2_SMI_DATA_OFFS)
-#define MVPP2_SMI_DEV_ADDR_OFFS 16 /* PHY device address */
-#define MVPP2_SMI_REG_ADDR_OFFS 21 /* PHY device reg addr*/
-#define MVPP2_SMI_OPCODE_OFFS 26 /* Write/Read opcode */
-#define MVPP2_SMI_OPCODE_READ (1 << MVPP2_SMI_OPCODE_OFFS)
-#define MVPP2_SMI_READ_VALID (1 << 27) /* Read Valid */
-#define MVPP2_SMI_BUSY (1 << 28) /* Busy */
-
-#define MVPP2_PHY_ADDR_MASK 0x1f
-#define MVPP2_PHY_REG_MASK 0x1f
/* Additional PPv2.2 offsets */
#define MVPP22_MPCS 0x007000
@@ -973,7 +957,6 @@ struct mvpp2_port {
struct phy_device *phy_dev;
phy_interface_t phy_interface;
- int phy_node;
int phyaddr;
struct mii_dev *bus;
#ifdef CONFIG_DM_GPIO
@@ -4562,7 +4545,7 @@ static int mvpp2_open(struct udevice *dev, struct mvpp2_port *port)
return err;
}
- if (port->phy_node) {
+ if (port->phyaddr < PHY_MAX_ADDR) {
mvpp2_phy_connect(dev, port);
mvpp2_link_event(port);
} else {
@@ -4701,6 +4684,7 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port)
u32 id;
u32 phyaddr = 0;
int phy_mode = -1;
+ int ret;
/* Default mdio_base from the same eth base */
if (port->priv->hw_version == MVPP21)
@@ -4719,17 +4703,12 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port)
dev_err(&pdev->dev, "could not find phy address\n");
return -1;
}
-
- phy_ofnode = ofnode_get_parent(offset_to_ofnode(phy_node));
- phy_base = ofnode_get_addr(phy_ofnode);
- port->mdio_base = (void *)phy_base;
-
- if (port->mdio_base < 0) {
- dev_err(&pdev->dev, "could not find mdio base address\n");
- return -1;
- }
+ ret = mdio_mii_bus_get_from_phy(phy_node, &port->bus);
+ if (ret)
+ return ret;
} else {
- phy_node = 0;
+ /* phy_addr is set to invalid value */
+ phyaddr = PHY_MAX_ADDR;
}
phy_mode_str = fdt_getprop(gd->fdt_blob, port_node, "phy-mode", NULL);
@@ -4767,7 +4746,6 @@ static int phy_info_parse(struct udevice *dev, struct mvpp2_port *port)
port->first_rxq = port->id * rxq_number;
else
port->first_rxq = port->id * port->priv->max_port_rxqs;
- port->phy_node = phy_node;
port->phy_interface = phy_mode;
port->phyaddr = phyaddr;
@@ -5044,119 +5022,7 @@ static int mvpp2_init(struct udevice *dev, struct mvpp2 *priv)
return 0;
}
-/* SMI / MDIO functions */
-
-static int smi_wait_ready(struct mvpp2_port *priv)
-{
- u32 timeout = MVPP2_SMI_TIMEOUT;
- u32 smi_reg;
-
- /* wait till the SMI is not busy */
- do {
- /* read smi register */
- smi_reg = readl(priv->mdio_base);
- if (timeout-- == 0) {
- printf("Error: SMI busy timeout\n");
- return -EFAULT;
- }
- } while (smi_reg & MVPP2_SMI_BUSY);
-
- return 0;
-}
-
-/*
- * mpp2_mdio_read - miiphy_read callback function.
- *
- * Returns 16bit phy register value, or 0xffff on error
- */
-static int mpp2_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
-{
- struct mvpp2_port *priv = bus->priv;
- u32 smi_reg;
- u32 timeout;
-
- /* check parameters */
- if (addr > MVPP2_PHY_ADDR_MASK) {
- printf("Error: Invalid PHY address %d\n", addr);
- return -EFAULT;
- }
-
- if (reg > MVPP2_PHY_REG_MASK) {
- printf("Err: Invalid register offset %d\n", reg);
- return -EFAULT;
- }
-
- /* wait till the SMI is not busy */
- if (smi_wait_ready(priv) < 0)
- return -EFAULT;
-
- /* fill the phy address and regiser offset and read opcode */
- smi_reg = (addr << MVPP2_SMI_DEV_ADDR_OFFS)
- | (reg << MVPP2_SMI_REG_ADDR_OFFS)
- | MVPP2_SMI_OPCODE_READ;
-
- /* write the smi register */
- writel(smi_reg, priv->mdio_base);
-
- /* wait till read value is ready */
- timeout = MVPP2_SMI_TIMEOUT;
-
- do {
- /* read smi register */
- smi_reg = readl(priv->mdio_base);
- if (timeout-- == 0) {
- printf("Err: SMI read ready timeout\n");
- return -EFAULT;
- }
- } while (!(smi_reg & MVPP2_SMI_READ_VALID));
-
- /* Wait for the data to update in the SMI register */
- for (timeout = 0; timeout < MVPP2_SMI_TIMEOUT; timeout++)
- ;
-
- return readl(priv->mdio_base) & MVPP2_SMI_DATA_MASK;
-}
-
-/*
- * mpp2_mdio_write - miiphy_write callback function.
- *
- * Returns 0 if write succeed, -EINVAL on bad parameters
- * -ETIME on timeout
- */
-static int mpp2_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
- u16 value)
-{
- struct mvpp2_port *priv = bus->priv;
- u32 smi_reg;
-
- /* check parameters */
- if (addr > MVPP2_PHY_ADDR_MASK) {
- printf("Error: Invalid PHY address %d\n", addr);
- return -EFAULT;
- }
-
- if (reg > MVPP2_PHY_REG_MASK) {
- printf("Err: Invalid register offset %d\n", reg);
- return -EFAULT;
- }
-
- /* wait till the SMI is not busy */
- if (smi_wait_ready(priv) < 0)
- return -EFAULT;
-
- /* fill the phy addr and reg offset and write opcode and data */
- smi_reg = value << MVPP2_SMI_DATA_OFFS;
- smi_reg |= (addr << MVPP2_SMI_DEV_ADDR_OFFS)
- | (reg << MVPP2_SMI_REG_ADDR_OFFS);
- smi_reg &= ~MVPP2_SMI_OPCODE_READ;
-
- /* write the smi register */
- writel(smi_reg, priv->mdio_base);
-
- return 0;
-}
-
-static int mvpp2_recv(struct udevice *dev, int flags, uchar **packetp)
+int mvpp2_recv(struct udevice *dev, int flags, uchar **packetp)
{
struct mvpp2_port *port = dev_get_priv(dev);
struct mvpp2_rx_desc *rx_desc;
@@ -5168,7 +5034,7 @@ static int mvpp2_recv(struct udevice *dev, int flags, uchar **packetp)
struct mvpp2_rx_queue *rxq;
u8 *data;
- if (port->phy_node)
+ if (port->phyaddr < PHY_MAX_ADDR)
if (!port->phy_dev->link)
return 0;
@@ -5237,7 +5103,7 @@ static int mvpp2_send(struct udevice *dev, void *packet, int length)
int tx_done;
int timeout;
- if (port->phy_node)
+ if (port->phyaddr < PHY_MAX_ADDR)
if (!port->phy_dev->link)
return 0;
@@ -5474,7 +5340,7 @@ static int mvpp2_probe(struct udevice *dev)
port->gop_id * MVPP22_PORT_OFFSET;
/* Set phy address of the port */
- if(port->phy_node)
+ if (port->phyaddr < PHY_MAX_ADDR)
mvpp22_smi_phy_addr_cfg(port);
/* GoP Init */
--
2.21.0
More information about the U-Boot
mailing list