[U-Boot] [PATCH v2 1/6] net: mvpp2x: fix traffic stuck after PHY start error

[Ramon Fried]

On Sat, Aug 3, 2019 at 4:54 AM <nhed+uboot at starry.com> wrote:
>
> From: Stefan Chulski <stefanc at marvell.com>
This is not a structured commit message,
Please follow the guidelines:
https://www.denx.de/wiki/view/U-Boot/Patches#Commit_message_conventions

>
> Issue:
> - Network stuck if autonegotion fails
>
> Issue root cause:
> - During port open procedure if autonegotion fails, configuration of
>   packet processor won't be finished and open procedure exits with error.
> - However this won't prevent u-boot network framework from
>   calling send and receive procedures.
> - Using of transmit and receive function of not configured properly
>   packet processor will cause traffic stuck.
>
> Fix:
> - Don't stop packet processor configuration if autonegotion failed.
>   Only error message would be triggered.
> - Exit transmit and receive function if there are no PHY link
>   indication.
> - U-boot network framework would call open procedure during next
>   transmit initiation.
>
> Signed-off-by: Stefan Chulski <stefanc at marvell.com>
> Reviewed-on: http://vgitil04.il.marvell.com:8080/55398
Remove the above line.
> Reviewed-by: Igal Liberman <igall at marvell.com>
> Tested-by: Igal Liberman <igall at marvell.com>
> ---
>  drivers/net/mvpp2.c | 27 ++++++++++++++-------------
>  1 file changed, 14 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c
> index bd89725e77..f36c8236b1 100644
> --- a/drivers/net/mvpp2.c
> +++ b/drivers/net/mvpp2.c
> @@ -4494,7 +4494,7 @@ static void mvpp2_stop_dev(struct mvpp2_port *port)
>                 gop_port_enable(port, 0);
>  }
>
> -static int mvpp2_phy_connect(struct udevice *dev, struct mvpp2_port *port)
> +static void mvpp2_phy_connect(struct udevice *dev, struct mvpp2_port *port)
>  {
>         struct phy_device *phy_dev;
>
> @@ -4504,7 +4504,7 @@ static int mvpp2_phy_connect(struct udevice *dev, struct mvpp2_port *port)
>                 port->phy_dev = phy_dev;
>                 if (!phy_dev) {
>                         netdev_err(port->dev, "cannot connect to phy\n");
> -                       return -ENODEV;
> +                       return;
>                 }
>                 phy_dev->supported &= PHY_GBIT_FEATURES;
>                 phy_dev->advertising = phy_dev->supported;
> @@ -4516,18 +4516,14 @@ static int mvpp2_phy_connect(struct udevice *dev, struct mvpp2_port *port)
>
>                 phy_config(phy_dev);
>                 phy_startup(phy_dev);
> -               if (!phy_dev->link) {
> +               if (!phy_dev->link)
>                         printf("%s: No link\n", phy_dev->dev->name);
> -                       return -1;
> -               }
> -
> -               port->init = 1;
> +               else
> +                       port->init = 1;
>         } else {
>                 mvpp2_egress_enable(port);
>                 mvpp2_ingress_enable(port);
>         }
> -
> -       return 0;
>  }
>
>  static int mvpp2_open(struct udevice *dev, struct mvpp2_port *port)
> @@ -4567,10 +4563,7 @@ static int mvpp2_open(struct udevice *dev, struct mvpp2_port *port)
>         }
>
>         if (port->phy_node) {
> -               err = mvpp2_phy_connect(dev, port);
> -               if (err < 0)
> -                       return err;
> -
> +               mvpp2_phy_connect(dev, port);
>                 mvpp2_link_event(port);
>         } else {
>                 mvpp2_egress_enable(port);
> @@ -5175,6 +5168,10 @@ static int mvpp2_recv(struct udevice *dev, int flags, uchar **packetp)
>         struct mvpp2_rx_queue *rxq;
>         u8 *data;
>
> +       if (port->phy_node)
> +               if (!port->phy_dev->link)
> +                       return 0;
> +
>         /* Process RX packets */
>         rxq = port->rxqs[0];
>
> @@ -5240,6 +5237,10 @@ static int mvpp2_send(struct udevice *dev, void *packet, int length)
>         int tx_done;
>         int timeout;
>
> +       if (port->phy_node)
> +               if (!port->phy_dev->link)
> +                       return 0;
> +
>         txq = port->txqs[0];
>         aggr_txq = &port->priv->aggr_txqs[smp_processor_id()];
>
> --
> 2.21.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot