[U-Boot] [PATCH] arm: baltos: use device tree alias to access Ethernet slave

[yegorslists at googlemail.com]

From: Yegor Yefremov <yegorslists at googlemail.com>

The full path has changed in the recent kernels so that it is
not possible to load them. Aliases "ethernet0" and "ethernet1"
are still present in both legacy and new kernels.

Also, fix error messages to correspond to the taken actions.

Signed-off-by: Yegor Yefremov <yegorslists at googlemail.com>
---
 board/vscom/baltos/board.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/board/vscom/baltos/board.c b/board/vscom/baltos/board.c
index c5949ad267..036a356578 100644
--- a/board/vscom/baltos/board.c
+++ b/board/vscom/baltos/board.c
@@ -288,15 +288,15 @@ int ft_board_setup(void *blob, bd_t *bd)
 	mac_addr[5] = header.MAC1[5];
 
 
-	node = fdt_path_offset(blob, "/ocp/ethernet/slave at 4a100200");
+	node = fdt_path_offset(blob, "ethernet0");
 	if (node < 0) {
-		printf("no /soc/fman/ethernet path offset\n");
+		printf("no ethernet0 path offset\n");
 		return -ENODEV;
 	}
 
 	ret = fdt_setprop(blob, node, "mac-address", &mac_addr, 6);
 	if (ret) {
-		printf("error setting local-mac-address property\n");
+		printf("error setting mac-address property\n");
 		return -ENODEV;
 	}
 
@@ -308,15 +308,15 @@ int ft_board_setup(void *blob, bd_t *bd)
 	mac_addr[4] = header.MAC2[4];
 	mac_addr[5] = header.MAC2[5];
 
-	node = fdt_path_offset(blob, "/ocp/ethernet/slave at 4a100300");
+	node = fdt_path_offset(blob, "ethernet1");
 	if (node < 0) {
-		printf("no /soc/fman/ethernet path offset\n");
+		printf("no ethernet1 path offset\n");
 		return -ENODEV;
 	}
 
 	ret = fdt_setprop(blob, node, "mac-address", &mac_addr, 6);
 	if (ret) {
-		printf("error setting local-mac-address property\n");
+		printf("error setting mac-address property\n");
 		return -ENODEV;
 	}
 
-- 
2.17.0