[U-Boot] [PATCH 00/22] i.MX8MM support
Peng Fan
peng.fan at nxp.com
Thu Aug 15 00:58:54 UTC 2019
Hi Frieder,
> Subject: Re: [PATCH 00/22] i.MX8MM support
>
> Hi Peng,
>
> On 09.08.19 06:14, Peng Fan wrote:
> > This is a splitted and updated patch from
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fcover%2F1128799%2F&data=02%7C01%7Cpeng.fa
> n%40nxp.com%7Ca565754f3e0c4feaa73a08d720d55a57%7C686ea1d3bc2b4
> c6fa92cd99c5c301635%7C0%7C0%7C637013973037743092&sdata=q7
> CqyQDxkK3%2BPy8sIIfAcnhptOMBLWD59waEEqh%2BgUw%3D&reserv
> ed=0 which is to support both i.MX8MM and i.MX8MN.
>
> I have sent you feedback for some of the patches. My own board is working,
> but there are still a few things to fix.
Thanks for your feedback. I'll check and fix my patch.
I will be out of office for a few days and
> will continue to work on this afterwards.
> For reference you can also look at my current working tree:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.
> com%2Ffschrempf%2Fu-boot%2Fcommits%2Fv2019.10-ktn-mx8mm&da
> ta=02%7C01%7Cpeng.fan%40nxp.com%7Ca565754f3e0c4feaa73a08d720d5
> 5a57%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63701397303
> 7743092&sdata=h6OR0YzoZCoT%2BJD1V4lB88bCGty08lnjxJcMuSUmqS
> 0%3D&reserved=0.
Thanks.
Peng.
>
> Thanks,
> Frieder
>
> >
> > This patchset only covers i.MX8MM and depends on the following patch
> > to work,
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fcover%2F1144317%2F&data=02%7C01%7Cpeng.fa
> n%40nx
> >
> p.com%7Ca565754f3e0c4feaa73a08d720d55a57%7C686ea1d3bc2b4c6fa92c
> d99c5c3
> >
> 01635%7C0%7C0%7C637013973037743092&sdata=MlWolli%2BnhtNm
> oA72Sp6O1t
> > PrhOcmaXu8tcQjoh6XSg%3D&reserved=0
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fpatch%2F1142686%2F&data=02%7C01%7Cpeng.fa
> n%40nx
> >
> p.com%7Ca565754f3e0c4feaa73a08d720d55a57%7C686ea1d3bc2b4c6fa92c
> d99c5c3
> >
> 01635%7C0%7C0%7C637013973037743092&sdata=iTqnmA8mjQbbxwR
> gNgqI3IM6b
> > iHdSk3DOZukVZpsqi0%3D&reserved=0
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fpatch%2F1142690%2F&data=02%7C01%7Cpeng.fa
> n%40nx
> >
> p.com%7Ca565754f3e0c4feaa73a08d720d55a57%7C686ea1d3bc2b4c6fa92c
> d99c5c3
> >
> 01635%7C0%7C0%7C637013973037743092&sdata=eDmRT3B42gew6t
> DohedSUaJpd
> > uSc30Uaj13CvdCLLuI%3D&reserved=0
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fpatch%2F1142691%2F&data=02%7C01%7Cpeng.fa
> n%40nx
> >
> p.com%7Ca565754f3e0c4feaa73a08d720d55a57%7C686ea1d3bc2b4c6fa92c
> d99c5c3
> >
> 01635%7C0%7C0%7C637013973037743092&sdata=2DFGP9Nu71xH1t9
> 40%2B%2BaM
> > 5AkAi5b6Gd%2Bq5GZEJghApE%3D&reserved=0
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fpatch%2F1143291%2F&data=02%7C01%7Cpeng.fa
> n%40nx
> >
> p.com%7Ca565754f3e0c4feaa73a08d720d55a57%7C686ea1d3bc2b4c6fa92c
> d99c5c3
> >
> 01635%7C0%7C0%7C637013973037743092&sdata=iHyfUD3%2FB2rjzN
> BvqwlGm8r
> > feO3zYGk7DOnWWx%2B04RQ%3D&reserved=0
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fpatch%2F1143765%2F&data=02%7C01%7Cpeng.fa
> n%40nx
> >
> p.com%7Ca565754f3e0c4feaa73a08d720d55a57%7C686ea1d3bc2b4c6fa92c
> d99c5c3
> >
> 01635%7C0%7C0%7C637013973037743092&sdata=C%2BWdEsBGt0eI
> M85LZap4fCq
> > yGhr5w9vCo27mSIMwX%2Bc%3D&reserved=0
> >
> > There is a README added, following that to test if you would like to.
> >
> > Peng Fan (21):
> > tools: imx8m_image: align spl bin image size
> > ddr: imx8m: fix ddr firmware location when enable SPL OF
> > imx8m: add image cfg for i.MX8MM lpddr4
> > imx: add IMX8MQ kconfig entry
> > imx: add IMX8MM kconfig entry
> > imx: imx8mm: add clock bindings header
> > imx: add i.MX8MM cpu type
> > imx: spl: add spl_board_boot_device for i.MX8MM
> > imx8m: update imx-regs for i.MX8MM
> > imx: add get_cpu_rev support for i.MX8MM
> > imx8m: add pin header for i.MX8MM
> > imx: add i.MX8MM PE property
> > imx8m: Fix MMU table issue for OPTEE memory
> > imx8m: set BYPASS ID SWAP to avoid AXI bus errors
> > imx8m: soc: enable SCTR clock before timer init
> > imx8m: rename clock to clock_imx8mq
> > imx8m: restructure clock.h
> > imx8m: add clk support for i.MX8MM
> > arm: dts: import i.MX8MM dtsi
> > arm: dts: add i.MX8MM pin func
> > imx: Add i.MX8MM EVK board support.
> >
> > Ye Li (1):
> > imx8m: Configure trustzone region 0 for non-secure access
> >
> > arch/arm/dts/Makefile | 3 +-
> > arch/arm/dts/imx8mm-evk-u-boot.dtsi | 92 +
> > arch/arm/dts/imx8mm-evk.dts | 235 +++
> > arch/arm/dts/imx8mm-pinfunc.h | 629
> +++++++
> > arch/arm/dts/imx8mm.dtsi | 733
> ++++++++
> > arch/arm/include/asm/arch-imx/cpu.h | 6 +
> > arch/arm/include/asm/arch-imx8m/clock.h | 493 +----
> > arch/arm/include/asm/arch-imx8m/clock_imx8mm.h | 387
> ++++
> > arch/arm/include/asm/arch-imx8m/clock_imx8mq.h | 424
> +++++
> > arch/arm/include/asm/arch-imx8m/imx-regs.h | 75 +-
> > arch/arm/include/asm/arch-imx8m/imx8mm_pins.h | 691
> +++++++
> > arch/arm/include/asm/mach-imx/iomux-v3.h | 4 +
> > arch/arm/include/asm/mach-imx/sys_proto.h | 8 +
> > arch/arm/mach-imx/cpu.c | 12 +
> > arch/arm/mach-imx/imx8m/Kconfig | 17 +-
> > arch/arm/mach-imx/imx8m/Makefile | 4 +-
> > arch/arm/mach-imx/imx8m/clock_imx8mm.c | 306
> +++
> > .../arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} | 5 +-
> > arch/arm/mach-imx/imx8m/clock_slice.c | 63 +
> > arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg | 16 +
> > arch/arm/mach-imx/imx8m/soc.c | 91 +-
> > arch/arm/mach-imx/spl.c | 8 +
> > board/freescale/imx8mm_evk/Kconfig | 12 +
> > board/freescale/imx8mm_evk/MAINTAINERS | 6 +
> > board/freescale/imx8mm_evk/Makefile | 12 +
> > board/freescale/imx8mm_evk/imx8mm_evk.c | 90 +
> > board/freescale/imx8mm_evk/lpddr4_timing.c | 1980
> ++++++++++++++++++++
> > board/freescale/imx8mm_evk/spl.c | 102 +
> > configs/imx8mm_evk_defconfig | 70 +
> > drivers/ddr/imx/imx8m/helper.c | 12 +-
> > include/configs/imx8mm_evk.h | 164 ++
> > include/dt-bindings/clock/imx8mm-clock.h | 253 +++
> > tools/imx8m_image.sh | 5 +-
> > 33 files changed, 6533 insertions(+), 475 deletions(-)
> > create mode 100644 arch/arm/dts/imx8mm-evk-u-boot.dtsi
> > create mode 100644 arch/arm/dts/imx8mm-evk.dts
> > create mode 100644 arch/arm/dts/imx8mm-pinfunc.h
> > create mode 100644 arch/arm/dts/imx8mm.dtsi
> > create mode 100644
> arch/arm/include/asm/arch-imx8m/clock_imx8mm.h
> > create mode 100644
> arch/arm/include/asm/arch-imx8m/clock_imx8mq.h
> > create mode 100644
> arch/arm/include/asm/arch-imx8m/imx8mm_pins.h
> > create mode 100644 arch/arm/mach-imx/imx8m/clock_imx8mm.c
> > rename arch/arm/mach-imx/imx8m/{clock.c => clock_imx8mq.c} (99%)
> > create mode 100644
> arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg
> > create mode 100644 board/freescale/imx8mm_evk/Kconfig
> > create mode 100644 board/freescale/imx8mm_evk/MAINTAINERS
> > create mode 100644 board/freescale/imx8mm_evk/Makefile
> > create mode 100644 board/freescale/imx8mm_evk/imx8mm_evk.c
> > create mode 100644 board/freescale/imx8mm_evk/lpddr4_timing.c
> > create mode 100644 board/freescale/imx8mm_evk/spl.c
> > create mode 100644 configs/imx8mm_evk_defconfig
> > create mode 100644 include/configs/imx8mm_evk.h
> > create mode 100644 include/dt-bindings/clock/imx8mm-clock.h
> >
More information about the U-Boot
mailing list