[U-Boot] [EXT] Re: [PATCH v4 1/5] spl: dm: disable SPI DM flash for non-DM SPL

Wed Aug 14 11:38:51 UTC 2019

On Wed, 14 Aug 2019 11:10:46 +0000
Chuanhua Han <chuanhua.han at nxp.com> wrote:

> > -----Original Message-----
> > From: Lukasz Majewski <lukma at denx.de>
> > Sent: 2019年8月14日 18:53
> > To: Chuanhua Han <chuanhua.han at nxp.com>
> > Cc: Jagan Teki <jagan at amarulasolutions.com>; Xiaowei Bao
> > <xiaowei.bao at nxp.com>; U-Boot-Denx <u-boot at lists.denx.de>; Pan
> > Jiafei <Jiafei.Pan at freescale.com>; Jagan Teki <jagan at openedev.com>;
> > Ruchika Gupta <ruchika.gupta at nxp.com>
> > Subject: Re: [U-Boot] [EXT] Re: [PATCH v4 1/5] spl: dm: disable SPI
> > DM flash for non-DM SPL
> > 
> > On Wed, 14 Aug 2019 10:41:32 +0000
> > Chuanhua Han <chuanhua.han at nxp.com> wrote:
> >   
> > > > -----Original Message-----
> > > > From: Lukasz Majewski <lukma at denx.de>
> > > > Sent: 2019年8月14日 16:57
> > > > To: Chuanhua Han <chuanhua.han at nxp.com>
> > > > Cc: Jagan Teki <jagan at amarulasolutions.com>; Xiaowei Bao
> > > > <xiaowei.bao at nxp.com>; U-Boot-Denx <u-boot at lists.denx.de>; Pan
> > > > Jiafei <Jiafei.Pan at freescale.com>; Jagan Teki
> > > > <jagan at openedev.com>; Ruchika Gupta <ruchika.gupta at nxp.com>
> > > > Subject: Re: [U-Boot] [EXT] Re: [PATCH v4 1/5] spl: dm: disable
> > > > SPI DM flash for non-DM SPL
> > > >
> > > > Hi Chuanhua,
> > > >  
> > > > > > -----Original Message-----
> > > > > > From: Jagan Teki <jagan at amarulasolutions.com>
> > > > > > Sent: 2019年8月14日 15:45
> > > > > > To: Chuanhua Han <chuanhua.han at nxp.com>
> > > > > > Cc: Wolfgang Denk <wd at denx.de>; Shengzhou Liu
> > > > > > <shengzhou.liu at nxp.com>; Ruchika Gupta
> > > > > > <ruchika.gupta at nxp.com>; Jagan Teki <jagan at openedev.com>;
> > > > > > Simon Glass <sjg at chromium.org>; Prabhakar Kushwaha
> > > > > > <prabhakar.kushwaha at nxp.com>; U-Boot-Denx
> > > > > > <u-boot at lists.denx.de>; Pan Jiafei
> > > > > > <Jiafei.Pan at freescale.com> Subject: [EXT] Re: [U-Boot]
> > > > > > [PATCH v4 1/5] spl: dm: disable SPI DM flash for non-DM SPL
> > > > > >
> > > > > > Caution: EXT Email
> > > > > >
> > > > > > On Fri, Jun 21, 2019 at 7:51 AM Chuanhua Han
> > > > > > <chuanhua.han at nxp.com> wrote:  
> > > > > > >
> > > > > > > This patch solves the problem that spiboot cannot be
> > > > > > > performed in non-DM SPL.
> > > > > > >
> > > > > > > Signed-off-by: Pan Jiafei <Jiafei.Pan at freescale.com>
> > > > > > > Signed-off-by: Chuanhua Han <chuanhua.han at nxp.com>
> > > > > > > ---
> > > > > > > Changes in v4:
> > > > > > >         - No change.
> > > > > > > Changes in v3:
> > > > > > >         - Add a cover-letter for this patch set.
> > > > > > > Changes in v2:
> > > > > > >         - No change.
> > > > > > >
> > > > > > >  include/config_uncmd_spl.h | 1 +
> > > > > > >  1 file changed, 1 insertion(+)
> > > > > > >
> > > > > > > diff --git a/include/config_uncmd_spl.h
> > > > > > > b/include/config_uncmd_spl.h index c2f9735ce7..da94b3d9df
> > > > > > > 100644 --- a/include/config_uncmd_spl.h
> > > > > > > +++ b/include/config_uncmd_spl.h
> > > > > > > @@ -15,6 +15,7 @@
> > > > > > >  #undef CONFIG_DM_GPIO
> > > > > > >  #undef CONFIG_DM_I2C
> > > > > > >  #undef CONFIG_DM_SPI
> > > > > > > +#undef CONFIG_DM_SPI_FLASH  
> > > > > >
> > > > > > Have you made any Travis-CI run?  
> > > > > I tested it with a local board  
> > > >
> > > > Could you be so kind and also test following patchset (parts
> > > > from Layerscape also needs testing):
> > > > https://patchwork.ozlabs.org/cover/1146494/  
> > > I don't quite understand this patch. How can I test it?  
> > 
> > You need to apply it first to -master branch.
> > 
> > Then apply your board code (or if it is already in mainline just
> > remove the #undef(s) from include/config_uncmd_spl.h)
> > 
> > As a last step - run make menuconfig and enable SPL_DM_SPI* flags.  
> Currently, it is in the master, and SPI* in the #undef(s) from
> include/ uncmd_spl.h has been deleted, but an error was reported: CC
>     spl/lib/display_options.o drivers/spi/spi.c: In function
> 'spi_do_alloc_slave': drivers/spi/spi.c:34:8: error: 'struct
> spi_slave' has no member named 'bus' slave->bus = bus;
>         ^~
> drivers/spi/spi.c:35:8: error: 'struct spi_slave' has no member named
> 'cs' slave->cs = cs;
>         ^~
> make[3]: *** [spl/drivers/spi/spi.o] Error 1
> make[3]: *** Waiting for unfinished jobs....
> make[2]: *** [spl/drivers/spi] Error 2
> make[1]: *** [spl/drivers] Error 2
> make[1]: *** Waiting for unfinished jobs....
>   LD      spl/lib/built-in.o
> make: *** [spl/u-boot-spl] Error 2

If your board is in mainline (master branch) it shall build without
issues:

Applied on top of -master branch:
'commit feb5a02f869d ("Merge branch 'master' of
git://git.denx.de/u-boot-sh")' Travis-CI (clean build):
https://travis-ci.org/lmajewski/u-boot-dfu/builds/570594278

The patch itself:
https://patchwork.ozlabs.org/patch/1146377/

> 
> Do I need to modify a lot of files?
> >   
> > > >
> > > > Which allows removal of
> > > > #undef CONFIG_DM_SPI
> > > > #undef CONFIG_DM_SPI_FLASH
> > > >
> > > > and have the same configuration done via Kconfig ?  
> > >  
> > > >  
> > > > > _______________________________________________
> > > > > U-Boot mailing list
> > > > > U-Boot at lists.denx.de
> > > > > https://lists.denx.de/listinfo/u-boot  
> > > >
> > > >
> > > >
> > > > Best regards,
> > > >
> > > > Lukasz Majewski
> > > >
> > > > --
> > > >
> > > > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194
> > > > Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax:
> > > > (+49)-8142-66989-80 Email: lukma at denx.de  
> > 
> > 
> > 
> > Best regards,
> > 
> > Lukasz Majewski
> > 
> > --
> > 
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de  

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190814/856687f3/attachment.sig>