[U-Boot] [v3] include/configs: ls1012a: add pfe stop command

[Priyanka Jain]

>-----Original Message-----
>From: Biwen Li <biwen.li at nxp.com>
>Sent: Friday, November 15, 2019 12:40 PM
>To: Shengzhou Liu <shengzhou.liu at nxp.com>; Priyanka Jain
><priyanka.jain at nxp.com>; Alison Wang <alison.wang at nxp.com>; Jagdish
>Gediya <jagdish.gediya at nxp.com>; sr at denx.de; Prabhakar X
><prabhakar.kushwaha at nxp.com>; Rajesh Bhagat <rajesh.bhagat at nxp.com>
>Cc: Jiafei Pan <jiafei.pan at nxp.com>; Xiaobo Xie <xiaobo.xie at nxp.com>; u-
>boot at lists.denx.de; Biwen Li <biwen.li at nxp.com>
>Subject: [v3] include/configs: ls1012a: add pfe stop command
>
>This adds pfe stop command before boot linux kernel to fix a problem that
>ethernet won't be workable after enter linux. Because there is a h/w limitation
>in LS1012A PFE, to re-initialize PFE it has to be safe shutdown, these steps are
>done through PFE stop.
>
>Signed-off-by: Biwen Li <biwen.li at nxp.com>
>---
<snip>
applied to fsl-qoriq master, awaiting upstream.

Thanks
priyankajain