December 2019 Archives by author
Starting: Sun Dec 1 01:55:31 CET 2019
Ending: Tue Dec 31 23:51:34 CET 2019
Messages: 2823
- [PATCH 08/35] common: Move relocate_code() to init.h
Timur Tabi (timur at kernel.org)
- [U-Boot] [PATCH] qemu-riscv64_smode, sifive-fu540: fix extlinux (define preboot)
David Abdurachmanov
- [U-Boot] [PATCH] qemu-riscv64_smode, sifive-fu540: fix extlinux (define preboot)
David Abdurachmanov
- Reconfiguring PCIe ranges
Yusuf Altıparmak
- Bad CRC for ramdisk when using large rootfs
Yusuf Altıparmak
- [PATCH] Make the sandbox board_run_command the default
Sean Anderson
- [PATCH] Include missing headers for fdt_support.h
Sean Anderson
- [PATCH] Include missing headers for asm-generic/sections.h
Sean Anderson
- [PATCH] riscv: Add option to print registers on exception
Sean Anderson
- [PATCH] riscv: Fix breakage caused by linker relaxation
Sean Anderson
- [PATCH] Add dependencies for MALLOC_F and OF_LIBFDT
Sean Anderson
- riscv: Sipeed Maix support
Sean Anderson
- [PATCH] riscv: Fix breakage caused by linker relaxation
Sean Anderson
- [PATCH] dm: Add a debug message when devices are skipped pre-reloc
Sean Anderson
- [PATCH] log: Include missing header for log.h
Sean Anderson
- clk: Include missing headers for linux/clk-provider.h
Sean Anderson
- [PATCH] clk: Fix error checking of dev_read_addr_ptr
Sean Anderson
- [PATCH 0/2] clk: Generalize clock_gate2 for use outside of imx
Sean Anderson
- [PATCH 1/2] clk: Move clk-gate2 to clock driver directory
Sean Anderson
- [PATCH 2/2] clk: Add option to restrict clk-gate2 to one bit toggle
Sean Anderson
- [PATCH] clk: Always use the supplied struct clk
Sean Anderson
- [PATCH] clk: Check that ops of composite clock components exist, before calling
Sean Anderson
- [PATCH v2] riscv: Add option to print registers on exception
Sean Anderson
- [PATCH] clk: Check that ops of composite clock components exist, before calling
Sean Anderson
- [PATCH 00/11] riscv: Add Sipeed Maix support
Sean Anderson
- [PATCH 01/11] clk: Always use the supplied struct clk
Sean Anderson
- [PATCH 02/11] clk: Check that ops of composite clock components exist, before calling
Sean Anderson
- [PATCH 03/11] riscv: Add headers for asm/global_data.h
Sean Anderson
- [PATCH 04/11] riscv: Add an option to default to RV64I
Sean Anderson
- [PATCH 05/11] riscv: Enable SiFive UART support pre-relocation
Sean Anderson
- [PATCH 06/11] riscv: Add initial Sipeed Maix support
Sean Anderson
- [PATCH 07/11] riscv: Add device tree for K210
Sean Anderson
- [PATCH 08/11] riscv: Add K210 sysctl support
Sean Anderson
- [PATCH 09/11] riscv: Add K210 pll support
Sean Anderson
- [PATCH 10/11] riscv: Add K210 clock support
Sean Anderson
- [PATCH 11/11] riscv: Add option to disable writes to mcounteren
Sean Anderson
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [U-Boot] [PATCH] ARM: DRA7: Fixup DSP OPP_HIGH clock rate on DRA76P/DRA77P SoCs
Suman Anna
- Load Debian/Fedora via EFI
Ilias Apalodimas
- [PATCH v3 8/8] virtio: rng: Add a random number generator(rng) driver
Ilias Apalodimas
- [PATCH v3 1/8] dm: rng: Add random number generator(rng) uclass
Ilias Apalodimas
- [U-Boot] [PATCH 1/4] mmc: meson-gx: Fix tx phase in the tuning process
Neil Armstrong
- [U-Boot] [PATCH 1/4] mmc: meson-gx: Fix tx phase in the tuning process
Neil Armstrong
- [PATCH 0/2] amlogic: add Khadas VIM3L support
Neil Armstrong
- [PATCH 5/5] arm64: dts: meson: add libretech-pc support
Neil Armstrong
- [PATCH 1/5] dt-bindings: leds: import common led bindings from linux v5.4
Neil Armstrong
- [PATCH 2/5] mmc: meson-gx: enable input clocks
Neil Armstrong
- [PATCH 3/5] clk: meson: reset mmc clock on probe
Neil Armstrong
- [PATCH 4/5] arm64: dts: meson: gxl: add i2c C pins
Neil Armstrong
- [PATCH 5/5] arm64: dts: meson: add libretech-pc support
Neil Armstrong
- [PATCH] i2c: i2c_cdns: fix write timeout on fifo boundary
Michael Auchter
- [PATCH] cros_ec: use uint instead of uint8_t for cmd param
Michael Auchter
- [PATCH 0/4] Fixes for RISC-V U-Boot SPL / OpenSBI boot flow
Lukas Auer
- [PATCH 1/4] spl: opensbi: specify main hart as preferred boot hart
Lukas Auer
- [PATCH 2/4] riscv: add functions for reading the IPI status
Lukas Auer
- [PATCH 3/4] riscv: add option to wait for ack from secondary harts in smp functions
Lukas Auer
- [PATCH 4/4] spl: opensbi: wait for ack from secondary harts before entering OpenSBI
Lukas Auer
- [PATCH v2 0/4] Fixes for RISC-V U-Boot SPL / OpenSBI boot flow
Lukas Auer
- [PATCH v2 1/4] spl: opensbi: specify main hart as preferred boot hart
Lukas Auer
- [PATCH v2 2/4] riscv: add functions for reading the IPI status
Lukas Auer
- [PATCH v2 3/4] riscv: add option to wait for ack from secondary harts in smp functions
Lukas Auer
- [PATCH v2 4/4] spl: opensbi: wait for ack from secondary harts before entering OpenSBI
Lukas Auer
- [PATCH 0/4] Fixes for RISC-V U-Boot SPL / OpenSBI boot flow
Auer, Lukas
- [U-Boot] [NXP-IMX] please pull imx-master-11-21
Stefano Babic
- [U-Boot] [NXP-IMX] please pull imx-master-11-21
Stefano Babic
- [U-Boot] [PATCH v3 2/2] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Stefano Babic
- [U-Boot] [PATCH v1 1/2] common: fdt_support: add support for setting usable memory
Stefano Babic
- [PATCH] clk: imx: imx8mm: Fix the first root clock in imx8mm_ahb_sels[]
Stefano Babic
- [U-Boot] Maximum size of u-boot.imx for TBS2910 board
Stefano Babic
- [U-Boot] imx8m: fix rom version check to unbreak some B0 chips
Stefano Babic
- [GIT PULL] Pull request: u-boot-imx u-boot-imx-20191209
Stefano Babic
- [PATCH] tools/imximage: share DCD information via Kconfig
Stefano Babic
- [U-Boot][RESEND PATCH 01/10] board: ge: bx50v3: sync devicetrees from Linux
Stefano Babic
- [PATCH v2 3/3] mach-imx: bootaux: elf firmware support
Stefano Babic
- [GIT PULL] Pull request: u-boot-imx u-boot-imx-20191228
Stefano Babic
- [PATCH] pico-imx7d: Convert to DM_ETH
Stefano Babic
- [PATCH v2 3/3] mach-imx: bootaux: elf firmware support
Stefano Babic
- [PATCH 1/2] imx: add imx8x capricorn giedi board
Stefano Babic
- [PATCH v2 3/3] mach-imx: bootaux: elf firmware support
Stefano Babic
- [PATCH] tools: imx8m_image: Change source path for DDR firmware to build dir
Stefano Babic
- [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode
Xiaowei Bao
- [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode
Xiaowei Bao
- [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode
Xiaowei Bao
- [U-Boot] [PATCH 1/3] PCI: layerscape: Add Support for ls2085a and ls2080a EP mode
Xiaowei Bao
- [U-Boot] [PATCH v5 1/5] spl: dm: disable SPI DM flash for non-DM SPL
Xiaowei Bao
- [PATCH 00/20] Add i.MXRT family support
Giulio Benetti
- [PATCH 01/20] armv7m: cache: add mmu_set_region_dcache_behaviour() stub for compatibility
Giulio Benetti
- [PATCH 02/20] spl: fix entry_point equal to load_addr
Giulio Benetti
- [PATCH 03/20] clk: imx: pllv3: register PLLV3 GENERIC and USB as 2 different clocks
Giulio Benetti
- [PATCH 04/20] clk: imx: pllv3: set div_mask differently if PLLV3 is GENERIC or USB
Giulio Benetti
- [PATCH 05/20] clk: imx: pllv3: add enable() support
Giulio Benetti
- [PATCH 06/20] clk: imx: pllv3: add disable() support
Giulio Benetti
- [PATCH 07/20] clk: imx: pllv3: add set_rate() support
Giulio Benetti
- [PATCH 08/20] clk: imx: pllv3: add PLLV3_SYS support
Giulio Benetti
- [PATCH 09/20] clk: imx: pllv3: add support for PLLV3_AV type
Giulio Benetti
- [PATCH 10/20] clk: imx: pfd: add set_rate()
Giulio Benetti
- [PATCH 11/20] clk: imx: add i.IMXRT1050 clk driver
Giulio Benetti
- [PATCH 12/20] pinctrl: add i.MXRT driver
Giulio Benetti
- [PATCH 13/20] ARM: dts: imxrt1050: add dtsi file
Giulio Benetti
- [PATCH 14/20] serial_lpuart: add clock enable if CONFIG_CLK is defined
Giulio Benetti
- [PATCH 15/20] serial_lpuart: add support for i.MXRT
Giulio Benetti
- [PATCH 16/20] ram: add SDRAM driver for i.MXRT SoCs
Giulio Benetti
- [PATCH 17/20] mmc: fsl_esdhc: make if(CONFIG_IS_ENABLED(CLK)) an #if statement
Giulio Benetti
- [PATCH 18/20] mmc: fsl_esdhc: add compatible for fsl, imxrt-usdhc
Giulio Benetti
- [PATCH 19/20] imx: Add basic support for the NXP IMXRT10xx SoC family
Giulio Benetti
- [PATCH 20/20] imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK
Giulio Benetti
- [PATCH 13/20] ARM: dts: imxrt1050: add dtsi file
Giulio Benetti
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Giulio Benetti
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Giulio Benetti
- [PATCH 02/20] spl: fix entry_point equal to load_addr
Giulio Benetti
- [PATCH 11/20] clk: imx: add i.IMXRT1050 clk driver
Giulio Benetti
- [PATCH 13/20] ARM: dts: imxrt1050: add dtsi file
Giulio Benetti
- [PATCH 11/20] clk: imx: add i.IMXRT1050 clk driver
Giulio Benetti
- [PATCH 12/20] pinctrl: add i.MXRT driver
Giulio Benetti
- [PATCH 15/20] serial_lpuart: add support for i.MXRT
Giulio Benetti
- [PATCH 14/20] serial_lpuart: add clock enable if CONFIG_CLK is defined
Giulio Benetti
- [PATCH 09/20] clk: imx: pllv3: add support for PLLV3_AV type
Giulio Benetti
- [PATCH 11/20] clk: imx: add i.IMXRT1050 clk driver
Giulio Benetti
- [PATCH 12/20] pinctrl: add i.MXRT driver
Giulio Benetti
- [PATCH 09/20] clk: imx: pllv3: add support for PLLV3_AV type
Giulio Benetti
- [PATCH] clk: uclass: clk_get_by_name() must not be available if CONFIG_OF_PLATDATA is enabled
Giulio Benetti
- [PATCH] clk: uclass: clk_get_by_name() must not be available if CONFIG_OF_PLATDATA is enabled
Giulio Benetti
- [PATCH] clk: uclass: clk_get_by_name() must not be available if CONFIG_OF_PLATDATA is enabled
Giulio Benetti
- [PATCH] clk: uclass: clk_get_by_name() must not be available if CONFIG_OF_PLATDATA is enabled
Giulio Benetti
- [PATCH 14/20] serial_lpuart: add clock enable if CONFIG_CLK is defined
Giulio Benetti
- [PATCH] cmd/blk_common: clarify no partition error message
Alexandre Besnard
- [PATCH] arm: omap: fix MPU DPLL divisor for 800MHz clock
Dario Binacchi
- [PATCH] spl: fit: enable hash control even without signature
Dario Binacchi
- [PATCH] tools: .gitignore: add asn1_compiler
Dario Binacchi
- [PATCH] .gitignore: ignore files generated by asn1 compiler
Dario Binacchi
- [PATCH] video: add wrappers for ttf type files to .gitignore
Dario Binacchi
- [PATCH] lib: ignore oid_registry_data.c file
Dario Binacchi
- email address of Boris Brezillon
Boris Brezillon
- [PATCH] ARC: enable unit tests on development platforms
Alexey Brodkin
- [PATCH 0/3] ARC nSIM (AKA virtual & prototyping platform) updates
Alexey Brodkin
- [PATCH 1/3] ARC: nSIM: switch from ARC UART to DW UART
Alexey Brodkin
- [PATCH 2/3] ARC: nsim_{700|700be|hs38be}_defconfigs: Disable networking
Alexey Brodkin
- [PATCH 3/3] ARC: nsim_hs38: Add support of Virtio NET & BLK
Alexey Brodkin
- [U-Boot] One u-boot.bin for Raspberry PI 3 and 4 - possible?
Matthias Brugger
- [PATCH 2/2] rpi: Enable DRAM bank initialization on arm64
Matthias Brugger
- [PATCH v4 1/6] fat: write: fix broken write to fragmented files
Matthias Brugger
- [PATCH] arm: dts: bcm283x: Allow UARTs to work before relocation
Matthias Brugger
- [U-Boot-Board-Maintainers] Raspberry pi 4 - u-boot - genet / scb
Matthias Brugger
- [GIT PULL] Please pull fixes for RPi targeted for v2020.01 release
Matthias Brugger
- [U-Boot-Board-Maintainers] Raspberry pi 4 - u-boot - genet / scb
Matthias Brugger
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Matthias Brugger
- Garbage UART output on RPI 4 with upstream kernel DTB
Matthias Brugger
- Garbage UART output on RPI 4 with upstream kernel DTB
Matthias Brugger
- [PATCH 0/5] arm64: meson: add libretech-pc support
Jerome Brunet
- [PATCH 1/5] dt-bindings: leds: import common led bindings from linux v5.4
Jerome Brunet
- [PATCH 2/5] mmc: meson-gx: enable input clocks
Jerome Brunet
- [PATCH 3/5] clk: meson: reset mmc clock on probe
Jerome Brunet
- [PATCH 4/5] arm64: dts: meson: gxl: add i2c C pins
Jerome Brunet
- [PATCH 5/5] arm64: dts: meson: add libretech-pc support
Jerome Brunet
- [U-Boot] [PATCH 1/4] mmc: meson-gx: Fix tx phase in the tuning process
Jerome Brunet
- [U-Boot] [PATCHv2 1/3] mmc: meson-gx: Fix clk phase tuning for MMC
Jerome Brunet
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Aleksandr Bulyshchenko
- [U-Boot] [PATCH v2 0/2] Fix BMP decode when BMP size is bigger than framebuffer
Patrice CHOTARD
- [U-Boot] [PATCH] cmd: pxe: execute the cls command only when supported
Patrice CHOTARD
- [PATCH 3/7] stm32mp1: rng: Add a driver for random number generator(rng) device
Patrice CHOTARD
- [PATCH 1/7] dm: rng: Add random number generator(rng) uclass
Patrice CHOTARD
- [PATCH 2/7] clk: stm32mp1: Add a clock entry for RNG1 device
Patrice CHOTARD
- [PATCH 4/7] configs: stm32mp15: Enable random number generator(rng) device
Patrice CHOTARD
- [PATCH 7/7] test: rng: Add basic test for random number generator(rng) uclass
Patrice CHOTARD
- [PATCH 6/7] configs: sandbox: Enable random number generator(rng) device
Patrice CHOTARD
- [PATCH 5/7] sandbox: rng: Add a random number generator(rng) driver
Patrice CHOTARD
- [PATCH v2 3/7] stm32mp1: rng: Add a driver for random number generator(rng) device
Patrice CHOTARD
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Patrice CHOTARD
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Patrice CHOTARD
- [PATCH 2/2] video: make BPP and ANSI configs optional
Patrice CHOTARD
- [U-Boot] [PATCH] qemu-riscv64_smode, sifive-fu540: fix extlinux (define preboot)
Vagrant Cascadian
- [U-Boot] [PATCH] qemu-riscv64_smode, sifive-fu540: fix extlinux (define preboot)
Vagrant Cascadian
- [U-Boot] [PATCH] rockchip: rk3399: Add Pinebook Pro laptop support
Vagrant Cascadian
- [PATCH 0/2] mkimage/rockchip: support packing optional second level boot-loader
Jeffy Chen
- [PATCH 1/2] rockchip: mkimage: support packing optional second level boot-loader
Jeffy Chen
- [PATCH 2/2] doc: rockchip: document packing second level loader with mkimage
Jeffy Chen
- [PATCH v2 0/3] mkimage/rockchip: support packing optional second level boot-loader
Jeffy Chen
- [PATCH v2 1/3] rockchip: mkimage: support packing optional second level boot-loader
Jeffy Chen
- [PATCH v2 2/3] doc: rockchip: document packing second level loader with mkimage
Jeffy Chen
- [PATCH v2 3/3] rockchip: mkimage: fix wrong range of rc4 encoding for boot image
Jeffy Chen
- [PATCH v3 0/3] mkimage/rockchip: support packing optional second level boot-loader
Jeffy Chen
- [PATCH v3 1/3] rockchip: mkimage: support packing optional second level boot-loader
Jeffy Chen
- [PATCH v3 2/3] doc: rockchip: document packing second level loader with mkimage
Jeffy Chen
- [PATCH v3 3/3] rockchip: mkimage: fix wrong range of rc4 encoding for boot image
Jeffy Chen
- [PATCH v4 0/3] mkimage/rockchip: support packing optional second level boot-loader
Jeffy Chen
- [PATCH v4 1/3] rockchip: mkimage: support packing optional second level boot-loader
Jeffy Chen
- [PATCH v4 2/3] doc: rockchip: document packing second level loader with mkimage
Jeffy Chen
- [PATCH v4 3/3] rockchip: mkimage: fix wrong range of rc4 encoding for boot image
Jeffy Chen
- [U-Boot] [PATCH v4 2/2] sifive: fu540: Enable OF_SEPARATE
Rick Chen
- [PATCH 0/4] Fixes for RISC-V U-Boot SPL / OpenSBI boot flow
Rick Chen
- [PATCH 1/4] spl: opensbi: specify main hart as preferred boot hart
Rick Chen
- [PATCH 2/4] riscv: add functions for reading the IPI status
Rick Chen
- [PATCH 3/4] riscv: add option to wait for ack from secondary harts in smp functions
Rick Chen
- [PATCH 4/4] spl: opensbi: wait for ack from secondary harts before entering OpenSBI
Rick Chen
- [PATCH v2 2/4] riscv: add functions for reading the IPI status
Rick Chen
- [PATCH] riscv: Add option to print registers on exception
Rick Chen
- [PATCH] doc: fix opensbi build steps for AX25-AE350
Rick Chen
- [PATCH 1/1] doc: fix AX25-AE350 RISC-V documentation
Rick Chen
- [PATCH] riscv: Fix breakage caused by linker relaxation
Rick Chen
- [PATCH v2] riscv: Add option to print registers on exception
Rick Chen
- [RFT][PATCH v1 0/2] Fix CONFIG_SYS_UBOOT_START default value
Patrice Chotard
- [PATCH v1 1/2] Makefile: Fix CONFIG_SYS_UBOOT_START default value
Patrice Chotard
- [PATCH v1 2/2] treewide: Remove CONFIG_SYS_UBOOT_START from configs board files
Patrice Chotard
- [U-Boot] [PATCH 0/2] Add support for booting EFI FIT images
Cristian Ciocaltea
- [PATCH v2 0/4] Add support for booting EFI FIT images
Cristian Ciocaltea
- [PATCH v2 1/4] image: Add IH_OS_EFI for EFI chain-load boot
Cristian Ciocaltea
- [PATCH v2 2/4] bootm: Add a bootm command for type IH_OS_EFI
Cristian Ciocaltea
- [PATCH v2 3/4] doc: Add sample uefi.its image description file
Cristian Ciocaltea
- [PATCH v2 4/4] doc: uefi.rst: Document launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH v2 2/4] bootm: Add a bootm command for type IH_OS_EFI
Cristian Ciocaltea
- [PATCH v2 1/4] image: Add IH_OS_EFI for EFI chain-load boot
Cristian Ciocaltea
- [PATCH v2 2/4] bootm: Add a bootm command for type IH_OS_EFI
Cristian Ciocaltea
- [PATCH v2 2/4] bootm: Add a bootm command for type IH_OS_EFI
Cristian Ciocaltea
- [PATCH v3 0/5] Add support for booting EFI FIT images
Cristian Ciocaltea
- [PATCH v3 1/5] image: Add IH_OS_EFI for EFI chain-load boot
Cristian Ciocaltea
- [PATCH v3 2/5] bootm: Add a bootm command for type IH_OS_EFI
Cristian Ciocaltea
- [PATCH v3 3/5] doc: Add sample uefi.its image description file
Cristian Ciocaltea
- [PATCH v3 4/5] doc: uefi.rst: Document launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH v3 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH v3 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH v3 2/5] bootm: Add a bootm command for type IH_OS_EFI
Cristian Ciocaltea
- [PATCH v3 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH v3 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH 1/1] test/py: Fix broken 'notbuildconfigspec' marker
Cristian Ciocaltea
- [PATCH v4 0/5] Add support for booting EFI FIT images
Cristian Ciocaltea
- [PATCH v4 1/5] image: Add IH_OS_EFI for EFI chain-load boot
Cristian Ciocaltea
- [PATCH v4 2/5] bootm: Add a bootm command for type IH_OS_EFI
Cristian Ciocaltea
- [PATCH v4 3/5] doc: Add sample uefi.its image description file
Cristian Ciocaltea
- [PATCH v4 4/5] doc: uefi.rst: Document launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH v4 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH v4 2/5] bootm: Add a bootm command for type IH_OS_EFI
Cristian Ciocaltea
- [PATCH v4 2/5] bootm: Add a bootm command for type IH_OS_EFI
Cristian Ciocaltea
- [PATCH v4 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH v4 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH v1 1/1] travis-ci: Fix "ResourceWarning: unclosed file"
Cristian Ciocaltea
- [PATCH v5 0/5] Add support for booting EFI FIT images
Cristian Ciocaltea
- [PATCH v5 1/5] image: Add IH_OS_EFI for EFI chain-load boot
Cristian Ciocaltea
- [PATCH v5 2/5] bootm: Add a bootm command for type IH_OS_EFI
Cristian Ciocaltea
- [PATCH v5 3/5] doc: Add sample uefi.its image description file
Cristian Ciocaltea
- [PATCH v5 4/5] doc: uefi.rst: Document launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH v5 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Cristian Ciocaltea
- [PATCH 1/1] travis-ci: provide env__efi_fit_tftp_file
Cristian Ciocaltea
- [PATCH v2 1/1] travis-ci: Fix "ResourceWarning: unclosed file"
Cristian Ciocaltea
- [PATCH v2 1/1] travis-ci: provide env__efi_fit_tftp_file
Cristian Ciocaltea
- [PATCH v2 1/1] travis-ci: provide env__efi_fit_tftp_file
Cristian Ciocaltea
- [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround
Hugh Cole-Baker
- [RFC] new board VoCore2
Mauro Condarelli
- [Patch] Add support for GD25Q128C SPI NOR chip
Mauro Condarelli
- [RFC] new board VoCore2
Mauro Condarelli
- mtk_sd on Vocore2 board
Mauro Condarelli
- [PATCH 1/1] Port to new board "VoCore2"
Mauro Condarelli
- [PATCH v2 1/2] Add GigaDevice gd25q128 128Mbit chip to spi-nor id table.
Mauro Condarelli
- [PATCH v2 2/2] Port to new board "VoCore2"
Mauro Condarelli
- [U-Boot] [PATCH 11/26] dts: mtmips: update reset controller node for mt7628
Mauro Condarelli
- [U-Boot] [PATCH 11/26] dts: mtmips: update reset controller node for mt7628
Mauro Condarelli
- [U-Boot] [PATCH 11/26] dts: mtmips: update reset controller node for mt7628
Mauro Condarelli
- [PATCH v3 2/8] clk: stm32mp1: Add a clock entry for RNG1 device
Patrick DELAUNAY
- [PATCH v3] board_f.c: Insure gd->new_bootstage alignment
Patrick DELAUNAY
- [PATCH v3 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Patrick DELAUNAY
- [PATCH v3 1/8] dm: rng: Add random number generator(rng) uclass
Patrick DELAUNAY
- [PATCH v3 4/8] configs: stm32mp15: Enable random number generator(rng) device
Patrick DELAUNAY
- [PATCH v3 6/8] configs: sandbox: Enable random number generator(rng) device
Patrick DELAUNAY
- [PATCH v3 1/8] dm: rng: Add random number generator(rng) uclass
Patrick DELAUNAY
- [PATCH v3 5/8] sandbox: rng: Add a random number generator(rng) driver
Patrick DELAUNAY
- [PATCH v3 7/8] test: rng: Add basic test for random number generator(rng) uclass
Patrick DELAUNAY
- [PATCH v3] board_f.c: Insure gd->new_bootstage alignment
Patrick DELAUNAY
- [PATCH v3] board_f.c: Insure gd->new_bootstage alignment
Patrick DELAUNAY
- [PATCH] stm32mp1: imply CMD_CLS
Patrick DELAUNAY
- [PATCH 1/2] stm32mp1: remove the imply BOOTSTAGE
Patrick DELAUNAY
- [PATCH 2/2] stm32mp1: configs: Resync with savedefconfig
Patrick DELAUNAY
- [PULL] Pull request: u-boot-stm32 u-boot-stm32-20191218
Patrick DELAUNAY
- [PATCH] net: dwc_eth_qos: Pass -1 to phy_connect() to scan for all PHYs
Patrick DELAUNAY
- [PATCH] ARM: stm32: Allow overriding setup_mac_address()
Patrick DELAUNAY
- [PATCH] ARM: stm32: Fill in missing loadaddr
Patrick DELAUNAY
- [PATCH] ARM: stm32: Permit multiple board targets
Patrick DELAUNAY
- [PATCH] ARM: stm32: Permit multiple board targets
Patrick DELAUNAY
- [PATCH] ARM: stm32: Permit multiple board targets
Patrick DELAUNAY
- [PATCH 1/5] remoteproc: elf_loader: Add elf resource table load support
Fabien DESSENNE
- [PATCH 1/5] remoteproc: elf_loader: Add elf resource table load support
Fabien DESSENNE
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Patrik Dahlstrom
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Patrik Dahlstrom
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Patrik Dahlstrom
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Patrik Dahlström
- [PATCH] serial: ns16550: Use old baud rate divisor for flushing if not given
Patrik Dahlström
- [U-Boot] [PATCH 0/6] J721e HS device support
Andrew F. Davis
- want to confirm that include/configs/xilinx_zynqmp*.h files seem unused
Robert P. J. Day
- want to confirm that include/configs/xilinx_zynqmp*.h files seem unused
Robert P. J. Day
- xilinx_zynqmp.h: erroneous(?) "#define CONFIG_PANIC_HANG"
Robert P. J. Day
- proper way to build [html]docs these days?
Robert P. J. Day
- [PATCH] [ARM] arch/arm/Kconfig: typo/grammar/punctuation fixes
Robert P. J. Day
- how to efficiently add a vendor zynqmp board stealing from xilinx/ dir?
Robert P. J. Day
- [U-Boot] [PATCH] cmd: pxe: execute the cls command only when supported
Patrick Delaunay
- [U-Boot] [PATCH] stm32mp1: imply CMD_CLS
Patrick Delaunay
- [PATCH 1/2] stm32mp1: remove the imply BOOTSTAGE
Patrick Delaunay
- [PATCH 2/2] stm32mp1: configs: Resync with savedefconfig
Patrick Delaunay
- gtlab slow?
Wolfgang Denk
- Boot from different partitions based on some condition
Wolfgang Denk
- [BUG] POWER: undefined reference to `_restgpr_25_x'
Wolfgang Denk
- [U-Boot-Board-Maintainers] Raspberry pi 4 - u-boot - genet / scb
Sascha Dewald
- [U-Boot-Board-Maintainers] Raspberry pi 4 - u-boot - genet / scb
Sascha Dewald
- [PATCH 0/3] Ethernet support for Raspberry Pi 4
Sascha Dewald
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Sascha Dewald
- [PATCH 2/2] video: make BPP and ANSI configs optional
Steffen Dirkwinkel
- [U-Boot] [PATCH] tools/imximage: fix reported DCD information for MX7ULP
Fabio Estevam
- [U-Boot] [NXP-IMX] please pull imx-master-11-21
Fabio Estevam
- [U-Boot] [NXP-IMX] please pull imx-master-11-21
Fabio Estevam
- [U-Boot] [PATCH v2] warp7: Fix U-Boot corruption after saving the environment
Fabio Estevam
- [U-Boot] [PATCH v3] warp7: Fix U-Boot corruption after saving the environment
Fabio Estevam
- [U-Boot] [PATCH v2] warp7: Fix U-Boot corruption after saving the environment
Fabio Estevam
- [PATCH v3] warp7: Fix U-Boot corruption after saving the environment
Fabio Estevam
- [PATCH] tools/imximage: fix reported DCD information for MX7ULP
Fabio Estevam
- [PATCH] arm: imx: Default to SYS_THUMB_BUILD for i.MX6/7
Fabio Estevam
- [PATCH v4] mx7ulp: Add support for Embedded Artists COM board
Fabio Estevam
- [PATCH v5] mx7ulp: Add support for Embedded Artists COM board
Fabio Estevam
- [PATCH 1/2] wandboard: Fix the the DM_PMIC conversion
Fabio Estevam
- [PATCH 2/2] wandboard: Propagate the error on PMIC function failure
Fabio Estevam
- [PATCH] wandboard: Remove repeated PMIC string
Fabio Estevam
- [PATCH v2 1/3] wandboard: Fix the DM_PMIC conversion
Fabio Estevam
- [PATCH v2 2/3] wandboard: Propagate the error on PMIC function failure
Fabio Estevam
- [PATCH v2 3/3] wandboard: Remove repeated PMIC string
Fabio Estevam
- Wandboard - I2C error when booting with HDMI cable
Fabio Estevam
- i.MX8MM-EVK Boot failure
Fabio Estevam
- [PATCH v2 2/3] wandboard: Propagate the error on PMIC function failure
Fabio Estevam
- [PATCH v3 1/2] wandboard: Fix the DM_PMIC conversion
Fabio Estevam
- [PATCH v3 2/2] wandboard: Remove repeated PMIC string
Fabio Estevam
- [U-Boot] [PATCH] net: eth-uclass: Remove warning about ROM MAC address
Fabio Estevam
- [U-Boot] [PATCH] net: eth-uclass: Remove warning about ROM MAC address
Fabio Estevam
- Wandboard - I2C error when booting with HDMI cable
Fabio Estevam
- i.MX8MM-EVK Boot failure
Fabio Estevam
- i.MX8MM-EVK Boot failure
Fabio Estevam
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Fabio Estevam
- [PATCH] tools/imximage: share DCD information via Kconfig
Fabio Estevam
- [PATCH] imx: imx8mq: handle ESDHC in mxc_get_clock
Fabio Estevam
- i.MX8MM-EVK Boot failure
Fabio Estevam
- [PATCH] imx8mq_evk: Update the required ATF branch
Fabio Estevam
- [PATCH] imx8mq_evk: Update the required ATF branch
Fabio Estevam
- [PATCH] imx8mq_evk: Update the required ATF branch
Fabio Estevam
- [PATCH] imx8mq_evk: Update the required ATF branch
Fabio Estevam
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Fabio Estevam
- [PATCH] imx8mq_evk: Update the required ATF branch
Fabio Estevam
- [PATCH] tools: imx8m_image: Change source path for DDR firmware to build dir
Fabio Estevam
- [PATCH] imx8m_evk: Remove unneeded earlycon string
Fabio Estevam
- [PATCH] imx8m: ddr_init: Move ddr_init() messages to debug level
Fabio Estevam
- [PATCH] imx8mq_evk: Update the required ATF branch
Fabio Estevam
- [PATCH] imx8mq_evk: Update the required ATF branch
Fabio Estevam
- [PATCH] imx8mq_evk: Update the required ATF branch
Fabio Estevam
- Re: 答复: 答复: [U-Boot] [PATCH 0/4] Make some changes to SDP
Fabio Estevam
- i.MX8MM-EVK Boot failure
Fabio Estevam
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Fabio Estevam
- [PATCH] imx8mm_evk: Adjust the environment for booting a mainline kernel
Fabio Estevam
- i.MX8MM-EVK Boot failure
Fabio Estevam
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Fabio Estevam
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Fabio Estevam
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Fabio Estevam
- [PATCH 17/17] imx: add i.MX8MN DDR4 board support
Fabio Estevam
- [PATCH v5] mx7ulp: Add support for Embedded Artists COM board
Fabio Estevam
- i.MX8QXP MEK does not boot with latest U-Boot
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] ARM: i.MX6: TARGET_NITROGEN6X: add 'select MX6QDL'
Fabio Estevam
- [PATCH] net: dwc_eth_qos: Pass -1 to phy_connect() to scan for all PHYs
Fabio Estevam
- [PATCH v1 1/2] imx: imx8qm_rom7720: added missing USDHC Base address defines
Fabio Estevam
- [PATCH v1 2/2] imx: imx8qm_rom7720_a1: fix broken fsl_esdhc_imx conversion
Fabio Estevam
- [PATCH v1] Revert "core: device: use dev_power_domain_on"
Fabio Estevam
- [PATCH] mx51evk: Fix U-Boot corruption after saving the environment
Fabio Estevam
- [PATCH 1/2] pfuze: Fix the pmic_get() parameter in the DM case
Fabio Estevam
- [PATCH 2/2] mx6sxsabresd: Adjust the mmcdev after DM conversion
Fabio Estevam
- [PATCH v1] Revert "core: device: use dev_power_domain_on"
Fabio Estevam
- [PATCH 1/3] mx7dsabresd: Fix the pmic_get() parameter in the DM case
Fabio Estevam
- [PATCH 2/3] mx6sllevk: Fix the pmic_get() parameter in the DM case
Fabio Estevam
- [PATCH 3/3] mx6slevk: Fix the pmic_get() parameter in the DM case
Fabio Estevam
- [PATCH 1/2] pfuze: Fix the pmic_get() parameter in the DM case
Fabio Estevam
- imx6ulz evk does not detect SD card
Fabio Estevam
- imx6ulz evk does not detect SD card
Fabio Estevam
- [v6 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Fabio Estevam
- [EXT] Re: [v6 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Fabio Estevam
- [PATCH 00/22] imx: add i.MX8MP support
Fabio Estevam
- [U-Boot] [PATCH v2 1/6] net: introduce DSA class for Ethernet switches
Florian Fainelli
- [U-Boot-Board-Maintainers] Raspberry pi 4 - u-boot - genet / scb
Florian Fainelli
- [U-Boot-Board-Maintainers] Raspberry pi 4 - u-boot - genet / scb
Florian Fainelli
- [RFC PATCH 2/2] net: Add Support for GENET Ethernet controller
Florian Fainelli
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Florian Fainelli
- [U-Boot] [PATCH 16/17] imx: add dtsi for i.MX8MN
Peng Fan
- [U-Boot] [PATCH 16/17] imx: add dtsi for i.MX8MN
Peng Fan
- i.MX8MM-EVK Boot failure
Peng Fan
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Peng Fan
- i.MX8MM-EVK Boot failure
Peng Fan
- [PATCH] imx: imx8mq: handle ESDHC in mxc_get_clock
Peng Fan
- [PATCH] imx8mq_evk: Update the required ATF branch
Peng Fan
- [PATCH] imx8mq_evk: Update the required ATF branch
Peng Fan
- [PATCH] imx8mq_evk: Update the required ATF branch
Peng Fan
- [PATCH] imx8m: ddr_init: Move ddr_init() messages to debug level
Peng Fan
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Peng Fan
- [PATCH] imx8mm_evk: Adjust the environment for booting a mainline kernel
Peng Fan
- [PATCH v1] Revert "core: device: use dev_power_domain_on"
Peng Fan
- [PATCH 1/3] mx7dsabresd: Fix the pmic_get() parameter in the DM case
Peng Fan
- [PATCH 2/3] mx6sllevk: Fix the pmic_get() parameter in the DM case
Peng Fan
- [PATCH 3/3] mx6slevk: Fix the pmic_get() parameter in the DM case
Peng Fan
- imx6ulz evk does not detect SD card
Peng Fan
- [PATCH] global_data: remove unused mxc_i2c specific field
Peng Fan
- [PATCH 00/22] imx: add i.MX8MP support
Peng Fan
- [PATCH 01/22] imx: get cpu id/type of i.MX8MP
Peng Fan
- [PATCH 02/22] imx8mp: set BYPASS ID SWAP to avoid AXI bus errors
Peng Fan
- [PATCH 03/22] imx: cpu: enlarge bit mask to 0x1FF for cpu type
Peng Fan
- [PATCH 04/22] imx: imx8m: add Kconfig entry for i.MX8MP
Peng Fan
- [PATCH 05/22] imx: spl: support i.MX8MP spl_boot_device
Peng Fan
- [PATCH 06/22] dt-bindings: clock: add i.MX8MP clock header
Peng Fan
- [PATCH 07/22] arm: dts: add i.MX8MP pinfunc header
Peng Fan
- [PATCH 08/22] imx: imx8mp: add basic clock
Peng Fan
- [PATCH 09/22] imx: imx8m: add 1GHz fracpll entry
Peng Fan
- [PATCH 10/22] pinctrl: imx8m: support i.MX8MP
Peng Fan
- [PATCH 11/22] mxc_ocotp: support i.MX8MP
Peng Fan
- [PATCH 12/22] ddr: imx8m: Add DRAM PLL to generate 1000Mhz output
Peng Fan
- [PATCH 13/22] arm: dts: freescale: Add i.MX8MP dtsi support
Peng Fan
- [PATCH 14/22] power: Add new PMIC PCA9450 driver
Peng Fan
- [PATCH 15/22] imx: imx8mp: add pin header file
Peng Fan
- [PATCH 16/22] imx: add i.MX8MP PE property
Peng Fan
- [PATCH 17/22] imx: Kconfig: make SPL_IMX_ROMAPI_LOADADDR visible to i.MX8MP
Peng Fan
- [PATCH 18/22] imx: imx8m: only support non-dm code in clock_imx8mm.c
Peng Fan
- [PATCH 19/22] clk: imx: add imx_clk_mux2_flags
Peng Fan
- [PATCH 20/22] clk: imx: add i.MX8MP clk driver
Peng Fan
- [PATCH 21/22] imx: imx8m: add imximage-8mp-lpddr4.cfg
Peng Fan
- [PATCH 22/22] imx: add i.MX8MP EVK board
Peng Fan
- [PATCH 00/22] imx: add i.MX8MP support
Peng Fan
- [U-Boot] [PATCH 0/4] omapl138_lcdk: fix MMC boot
Adam Ford
- i.MX8MM-EVK Boot failure
Adam Ford
- i.MX8MM-EVK Boot failure
Adam Ford
- i.MX8MM-EVK Boot failure
Adam Ford
- i.MX8MM-EVK Boot failure
Adam Ford
- [PATCH] imx8mq_evk: Update the required ATF branch
Adam Ford
- [PATCH] imx8mq_evk: Update the required ATF branch
Adam Ford
- OMAP L138 LCDK - giving up maintainership
Adam Ford
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Adam Ford
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Adam Ford
- [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode
Ramon Fried
- [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode
Ramon Fried
- [PATCH] net: dwc_eth_qos: Pass -1 to phy_connect() to scan for all PHYs
Ramon Fried
- [U-Boot] [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Schrempf Frieder
- [U-Boot] [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Schrempf Frieder
- [U-Boot] [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Schrempf Frieder
- [U-Boot] [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Schrempf Frieder
- [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Schrempf Frieder
- [PATCH 1/2] menu: Make some parts of the menu available to other components
Schrempf Frieder
- [PATCH 2/2] pxe: Get default selection from board type if label matches
Schrempf Frieder
- [PATCH 2/2] pxe: Get default selection from board type if label matches
Schrempf Frieder
- [PATCH] ddr: imx8m: Return error values from LPDDR4 training
Schrempf Frieder
- [PATCH] tools: imx8m_image: Change source path for DDR firmware to build dir
Schrempf Frieder
- [U-Boot] [PATCH] net: eth-uclass: Remove warning about ROM MAC address
Schrempf Frieder
- [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Schrempf Frieder
- [PATCH] tools: imx8m_image: Change source path for DDR firmware to build dir
Schrempf Frieder
- [PATCH] imx8mq_evk: Update the required ATF branch
Schrempf Frieder
- [U-Boot-Board-Maintainers] Raspberry pi 4 - u-boot - genet / scb
Andreas Färber
- [PATCH 0/7] Add a random number generator uclass
Sughosh Ganu
- [PATCH 1/7] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH 2/7] clk: stm32mp1: Add a clock entry for RNG1 device
Sughosh Ganu
- [PATCH 3/7] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH 4/7] configs: stm32mp15: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH 5/7] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH 6/7] configs: sandbox: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH 7/7] test: rng: Add basic test for random number generator(rng) uclass
Sughosh Ganu
- [PATCH 3/7] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v2 0/7] Add a random number generator uclass
Sughosh Ganu
- [PATCH v2 1/7] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH v2 2/7] clk: stm32mp1: Add a clock entry for RNG1 device
Sughosh Ganu
- [PATCH v2 3/7] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v2 4/7] configs: stm32mp15: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v2 5/7] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v2 6/7] configs: sandbox: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v2 7/7] test: rng: Add basic test for random number generator(rng) uclass
Sughosh Ganu
- [PATCH v3 0/8] Add a random number generator uclass
Sughosh Ganu
- [PATCH v3 1/8] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH v3 2/8] clk: stm32mp1: Add a clock entry for RNG1 device
Sughosh Ganu
- [PATCH v3 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v3 4/8] configs: stm32mp15: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v3 5/8] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v3 6/8] configs: sandbox: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v3 7/8] test: rng: Add basic test for random number generator(rng) uclass
Sughosh Ganu
- [PATCH v3 8/8] virtio: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH] efi_selftest: Update .gitignore
Sughosh Ganu
- [PATCH v3 1/8] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH v3 5/8] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v3 7/8] test: rng: Add basic test for random number generator(rng) uclass
Sughosh Ganu
- [PATCH v4 0/8] Add a random number generator uclass
Sughosh Ganu
- [PATCH v4 1/8] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH v4 2/8] clk: stm32mp1: Add a clock entry for RNG1 device
Sughosh Ganu
- [PATCH v4 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v4 4/8] configs: stm32mp15: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v4 5/8] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v4 6/8] configs: sandbox: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v4 7/8] test: rng: Add basic test for random number generator(rng) uclass
Sughosh Ganu
- [PATCH v4 8/8] virtio: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH 0/3] qemu: arm64: Add support for efi_rng_protocol
Sughosh Ganu
- [PATCH 1/3] efi_loader: Add guidcpy function
Sughosh Ganu
- [PATCH 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Sughosh Ganu
- [PATCH 3/3] efi_rng_protocol: Install the efi_rng_protocol on the root node
Sughosh Ganu
- [PATCH 1/3] efi_loader: Add guidcpy function
Sughosh Ganu
- [PATCH 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Sughosh Ganu
- [PATCH 3/3] efi_rng_protocol: Install the efi_rng_protocol on the root node
Sughosh Ganu
- [PATCH v4 1/8] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Sughosh Ganu
- [PATCH v5 0/8] Add a random number generator uclass
Sughosh Ganu
- [PATCH v5 1/8] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH v5 2/8] clk: stm32mp1: Add a clock entry for RNG1 device
Sughosh Ganu
- [PATCH v5 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v5 4/8] configs: stm32mp15: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v5 5/8] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v5 6/8] configs: sandbox: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v5 7/8] test: rng: Add basic test for random number generator(rng) uclass
Sughosh Ganu
- [PATCH v5 8/8] virtio: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v2 0/3] Add support for efi_rng_protocol
Sughosh Ganu
- [PATCH v2 1/3] efi_loader: Add guidcpy function
Sughosh Ganu
- [PATCH v2 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Sughosh Ganu
- [PATCH v2 3/3] efi_rng_protocol: Install the efi_rng_protocol on the root node
Sughosh Ganu
- [PATCH v4 5/8] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v4 8/8] virtio: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v5 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v5 8/8] virtio: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v5 1/8] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH v5 5/8] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v5 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v5 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v6 0/8] Add a random number generator uclass
Sughosh Ganu
- [PATCH v6 1/8] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH v6 2/8] clk: stm32mp1: Add a clock entry for RNG1 device
Sughosh Ganu
- [PATCH v6 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v6 4/8] configs: stm32mp15: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v6 5/8] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v6 6/8] configs: sandbox: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v6 7/8] test: rng: Add basic test for random number generator(rng) uclass
Sughosh Ganu
- [PATCH v6 8/8] virtio: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v3 0/3] Add support for efi_rng_protocol
Sughosh Ganu
- [PATCH v3 1/3] efi_loader: Add guidcpy function
Sughosh Ganu
- [PATCH v3 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Sughosh Ganu
- [PATCH v3 3/3] efi_rng_protocol: Install the efi_rng_protocol on the root node
Sughosh Ganu
- [PATCH v6 6/8] configs: sandbox: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v6 5/8] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v3 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Sughosh Ganu
- [PATCH v3 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Sughosh Ganu
- [PATCH v7 0/8] Add a random number generator uclass
Sughosh Ganu
- [PATCH v7 1/8] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH v7 2/8] clk: stm32mp1: Add a clock entry for RNG1 device
Sughosh Ganu
- [PATCH v7 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v7 4/8] configs: stm32mp15: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v7 5/8] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v7 6/8] configs: sandbox: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v7 7/8] test: rng: Add basic test for random number generator(rng) uclass
Sughosh Ganu
- [PATCH v7 8/8] virtio: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v4 0/3] Add support for efi_rng_protocol
Sughosh Ganu
- [PATCH v4 1/3] efi_loader: Add guidcpy function
Sughosh Ganu
- [PATCH v4 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Sughosh Ganu
- [PATCH v4 3/3] efi_rng_protocol: Install the efi_rng_protocol on the root node
Sughosh Ganu
- [PATCH v7 8/8] virtio: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v8 0/8] Add a random number generator uclass
Sughosh Ganu
- [PATCH v8 1/8] dm: rng: Add random number generator(rng) uclass
Sughosh Ganu
- [PATCH v8 2/8] clk: stm32mp1: Add a clock entry for RNG1 device
Sughosh Ganu
- [PATCH v8 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Sughosh Ganu
- [PATCH v8 4/8] configs: stm32mp15: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v8 5/8] sandbox: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v8 6/8] configs: sandbox: Enable random number generator(rng) device
Sughosh Ganu
- [PATCH v8 7/8] test: rng: Add basic test for random number generator(rng) uclass
Sughosh Ganu
- [PATCH v8 8/8] virtio: rng: Add a random number generator(rng) driver
Sughosh Ganu
- [PATCH v6 0/8] Add a random number generator uclass
Sughosh Ganu
- [PATCH v6 0/8] Add a random number generator uclass
Sughosh Ganu
- [PATCH v3 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Sughosh Ganu
- [PATCH] qemu: arm: Scan the pci bus in board_init
Sughosh Ganu
- [PATCH] qemu: arm: Scan the pci bus in board_init
Sughosh Ganu
- DFU and UBI
Guillermo Rodriguez Garcia
- [v2] armv8: fsl-layerscape: Kconfig: Correct I2C dependecies
Jagdish Gediya
- rk3328-firefly ddr4 tpl init
Peter Geis
- Re: rk3328-firefly ddr4 tpl init【请注意,邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】
Peter Geis
- [U-Boot] [PATCH v5 080/101] x86: Add a generic Intel pinctrl driver
Simon Glass
- [U-Boot] [PATCH v5 079/101] x86: Add low-power subsystem (lpss) support
Simon Glass
- [U-Boot] [PATCH] arm: dts: bcm283x: Allow UARTs to work before relocation
Simon Glass
- [U-Boot] [PATCH] test.py: Make search for autoconf.mk more permission
Simon Glass
- [U-Boot] [RESEND PATCH v2] dm: serial: Handle "stdout-path" with ":options" correctly
Simon Glass
- [U-Boot] [RESEND PATCH v2] dm: serial: Handle "stdout-path" with ":options" correctly
Simon Glass
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Simon Glass
- Please pull u-boot-dm
Simon Glass
- [PATCH] test.py: Make search for autoconf.mk more permission
Simon Glass
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Simon Glass
- [PATCH v5 085/101] x86: apl: Add UART driver
Simon Glass
- [U-Boot] [PATCH] binman: README: fix default filename of u-boot-with-ucode-ptr
Simon Glass
- [PATCH v5 006/101] net: Move the checksum functions to lib/
Simon Glass
- [PATCH v5 008/101] i2c: designware: Avoid using static data
Simon Glass
- [PATCH v5 084/101] x86: apl: Add PMC driver
Simon Glass
- [PATCH 1/4] genboardcfg: Support a quiet mode
Simon Glass
- [PATCH 2/4] buildman: Ask genboardscfg to be quiet
Simon Glass
- [PATCH 3/4] buildman: Figure out boards before commits
Simon Glass
- [PATCH 4/4] buildman: Add options to get the arch and toolchain info
Simon Glass
- [PATCH 1/4] serial: n16550: Support run-time configuration
Simon Glass
- [PATCH 2/4] x86: Update coreboot serial table struct
Simon Glass
- [PATCH 3/4] x86: serial: Add a coreboot serial driver
Simon Glass
- [PATCH 4/4] x86: Move coreboot over to use the coreboot UART
Simon Glass
- [PATCH] Makefile: Ensure tools directory exists in output prior to use
Simon Glass
- [PATCH v5 088/101] x86: apl: Add systemagent driver
Simon Glass
- [PATCH v5 098/101] x86: apl: Add Kconfig and Makefile
Simon Glass
- [PATCH v5 099/101] x86: apl: Add FSP structures
Simon Glass
- [PATCH v5 100/101] x86: apl: Add FSP support
Simon Glass
- [PATCH] buildman: Ignore blank lines during size checks
Simon Glass
- [PATCH v6 000/102] x86: Add initial support for apollolake
Simon Glass
- [PATCH v6 001/102] binman: Add a library to access binman entries
Simon Glass
- [PATCH v6 002/102] dm: gpio: Allow control of GPIO uclass in SPL
Simon Glass
- [PATCH v6 003/102] dm: core: Fix offset_to_ofnode() with invalid offset
Simon Glass
- [PATCH v6 004/102] dm: pci: Allow delaying auto-config until after relocation
Simon Glass
- [PATCH v6 005/102] dm: pci: Move pci_get_devfn() into a common file
Simon Glass
- [PATCH v6 006/102] net: Move the checksum functions to lib/
Simon Glass
- [PATCH v6 007/102] i2c: designware: Tidy up PCI support
Simon Glass
- [PATCH v6 008/102] i2c: designware: Avoid using static data
Simon Glass
- [PATCH v6 009/102] i2c: designware: Support use in SPL
Simon Glass
- [PATCH v6 010/102] x86: spi: Add helper functions for Intel Fast SPI
Simon Glass
- [PATCH v6 011/102] fdt: Show the preprocessed .dts file on error
Simon Glass
- [PATCH v6 012/102] dm: pinctrl: Allow enabling full pinctrl in SPL/TPL
Simon Glass
- [PATCH v6 013/102] board_r: Move early-timer init later
Simon Glass
- [PATCH v6 014/102] RFC: sandbox: net: Suppress the MAC-address warnings
Simon Glass
- [PATCH v6 015/102] Revert "RFC: sandbox: net: Suppress the MAC-address warnings"
Simon Glass
- [PATCH v6 016/102] x86: timer: use a timer base of 0
Simon Glass
- [PATCH v6 017/102] x86: timer: Reduce timer code size in TPL on Intel CPUs
Simon Glass
- [PATCH v6 018/102] x86: Drop unnecessary cpu code for TPL
Simon Glass
- [PATCH v6 019/102] x86: Drop unnecessary interrupt code for TPL
Simon Glass
- [PATCH v6 020/102] x86: power: Add an ACPI PMC uclass
Simon Glass
- [PATCH v6 021/102] x86: sandbox: Add a PMC emulator and test
Simon Glass
- [PATCH v6 022/102] pci: Add support for p2sb uclass
Simon Glass
- [PATCH v6 023/102] sandbox: Disable mmio by default in tests
Simon Glass
- [PATCH v6 024/102] sandbox: Add PCI driver and test for p2sb
Simon Glass
- [PATCH v6 025/102] x86: Move UCLASS_IRQ into a separate file
Simon Glass
- [PATCH v6 026/102] sandbox: Add a test for IRQ
Simon Glass
- [PATCH v6 027/102] x86: Define the SPL image start
Simon Glass
- [PATCH v6 028/102] x86: Reduce mrccache record alignment size
Simon Glass
- [PATCH v6 029/102] x86: Correct mrccache find_next_mrc_cache() calculation
Simon Glass
- [PATCH v6 030/102] x86: Adjust mrccache_get_region() to use livetree
Simon Glass
- [PATCH v6 031/102] x86: Adjust mrccache_get_region() to support get_mmap()
Simon Glass
- [PATCH v6 032/102] x86: Add a new global_data member for the cache record
Simon Glass
- [PATCH v6 033/102] x86: Tidy up error handling in mrccache_save()
Simon Glass
- [PATCH v6 034/102] x86: Update mrccache to support multiple caches
Simon Glass
- [PATCH v6 035/102] x86: Add mrccache support for a 'variable' cache
Simon Glass
- [PATCH v6 036/102] x86: Don't export mrccache_update()
Simon Glass
- [PATCH v6 037/102] x86: Move fsp_prepare_mrc_cache() to fsp1 directory
Simon Glass
- [PATCH v6 038/102] x86: Set the DRAM banks to reflect real location
Simon Glass
- [PATCH v6 039/102] x86: Set up the MTRR for SDRAM
Simon Glass
- [PATCH v6 040/102] x86: Don't imply libfdt or SPI flash in TPL
Simon Glass
- [PATCH v6 041/102] x86: Allow removal of standard PCH drivers
Simon Glass
- [PATCH v6 042/102] x86: Allow interrupt to happen once
Simon Glass
- [PATCH v6 043/102] x86: fsp: Make graphics support common to FSP1/2
Simon Glass
- [PATCH v6 044/102] x86: fsp: Correct wrong header inlude in fsp_support.c
Simon Glass
- [PATCH v6 045/102] x86: fsp: Add FSP2 base support
Simon Glass
- [PATCH v6 046/102] x86: fsp: Set up an MTRR for the graphics frame buffer
Simon Glass
- [PATCH v6 047/102] x86: fsp: Add a new arch_fsp_init_r() hook
Simon Glass
- [PATCH v6 048/102] x86: fsp: Allow remembering the location of FSP-S
Simon Glass
- [PATCH v6 049/102] x86: fsp: Make the notify API call common
Simon Glass
- [PATCH v6 050/102] x86: Don't include the BIOS emulator in TPL
Simon Glass
- [PATCH v6 051/102] x86: Add an option to include a FIT
Simon Glass
- [PATCH v6 052/102] x86: Add support for newer CAR schemes
Simon Glass
- [PATCH v6 053/102] x86: Disable microcode section for FSP2
Simon Glass
- [PATCH v6 054/102] x86: Update the fsp command for FSP2
Simon Glass
- [PATCH v6 055/102] x86: Update .dtsi file for FSP2
Simon Glass
- [PATCH v6 056/102] x86: Add an option to control the position of U-Boot
Simon Glass
- [PATCH v6 057/102] x86: Add an option to control the position of SPL
Simon Glass
- [PATCH v6 058/102] x86: Add an fdtmap and image-header
Simon Glass
- [PATCH v6 059/102] x86: Don't repeat microcode in U-Boot if not needed
Simon Glass
- [PATCH v6 060/102] x86: Separate out U-Boot and device tree in ROM image
Simon Glass
- [PATCH v6 061/102] x86: Make MSR_PKG_POWER_SKU common
Simon Glass
- [PATCH v6 062/102] spi: Correct operations check in dm_spi_xfer()
Simon Glass
- [PATCH v6 063/102] x86: spi: Don't enable SPI_FLASH_BAR by default
Simon Glass
- [PATCH v6 064/102] spi: ich: Move init function just above probe()
Simon Glass
- [PATCH v6 065/102] spi: ich: Move the protection/lockdown code into a function
Simon Glass
- [PATCH v6 066/102] spi: ich: Convert to livetree
Simon Glass
- [PATCH v6 067/102] spi: ich: Fix header order
Simon Glass
- [PATCH v6 068/102] spi: ich: Various small tidy-ups
Simon Glass
- [PATCH v6 069/102] spi: ich: Add mmio_base to struct ich_spi_platdata
Simon Glass
- [PATCH v6 070/102] dm: doc: Add a note about of-platdata and header files
Simon Glass
- [PATCH v6 071/102] spi: ich: Correct max-size bug in ich_spi_adjust_size()
Simon Glass
- [PATCH v6 072/102] spi: ich: Support of-platdata for fast-spi
Simon Glass
- [PATCH v6 073/102] spi: ich: Support hardware sequencing
Simon Glass
- [PATCH v6 074/102] spi: ich: Add support for get_mmap() method
Simon Glass
- [PATCH v6 075/102] spi: ich: Add TPL support
Simon Glass
- [PATCH v6 076/102] spi: ich: Add Apollo Lake support
Simon Glass
- [PATCH v6 077/102] mtd: spi: Export spi_flash_std_probe()
Simon Glass
- [PATCH v6 078/102] x86: Enable pinctrl in SPL and TPL
Simon Glass
- [PATCH v6 079/102] x86: Add low-power subsystem (lpss) support
Simon Glass
- [PATCH v6 080/102] x86: Add a generic Intel pinctrl driver
Simon Glass
- [PATCH v6 081/102] x86: Add a generic Intel GPIO driver
Simon Glass
- [PATCH v6 082/102] x86: Move qemu CPU fixup function into its own file
Simon Glass
- [PATCH v6 083/102] x86: apl: Add basic IO addresses
Simon Glass
- [PATCH v6 084/102] x86: apl: Add PMC driver
Simon Glass
- [PATCH v6 085/102] x86: apl: Add UART driver
Simon Glass
- [PATCH v6 086/102] x86: apl: Add pinctrl driver
Simon Glass
- [PATCH v6 087/102] i2c: designware: Add Apollo Lake support
Simon Glass
- [PATCH v6 088/102] x86: apl: Add systemagent driver
Simon Glass
- [PATCH v6 089/102] x86: apl: Add hostbridge driver
Simon Glass
- [PATCH v6 090/102] x86: apl: Add ITSS driver
Simon Glass
- [PATCH v6 091/102] x86: apl: Add LPC driver
Simon Glass
- [PATCH v6 092/102] x86: apl: Add PCH driver
Simon Glass
- [PATCH v6 093/102] x86: apl: Add PUNIT driver
Simon Glass
- [PATCH v6 094/102] spl: Add methods to find the position/size of next phase
Simon Glass
- [PATCH v6 095/102] x86: apl: Add SPL loaders
Simon Glass
- [PATCH v6 096/102] x86: apl: Add a CPU driver
Simon Glass
- [PATCH v6 097/102] x86: apl: Add SPL/TPL init
Simon Glass
- [PATCH v6 098/102] x86: apl: Add P2SB driver
Simon Glass
- [PATCH v6 099/102] x86: apl: Add Kconfig and Makefile
Simon Glass
- [PATCH v6 100/102] x86: apl: Add FSP structures
Simon Glass
- [PATCH v6 101/102] x86: apl: Add FSP support
Simon Glass
- [PATCH v6 102/102] x86: Add chromebook_coral
Simon Glass
- [PATCH 0/2] sandbox: enable UEFI unit tests
Simon Glass
- [PATCH v6 000/102] x86: Add initial support for apollolake
Simon Glass
- [PATCH] usb: musb-new: Drop use of BUG()
Simon Glass
- [PATCH v7 00/17] x86: Add initial support for apollolake
Simon Glass
- [PATCH v7 01/17] x86: apl: Add pinctrl driver
Simon Glass
- [PATCH v7 02/17] i2c: designware: Add Apollo Lake support
Simon Glass
- [PATCH v7 03/17] x86: apl: Add systemagent driver
Simon Glass
- [PATCH v7 04/17] x86: apl: Add hostbridge driver
Simon Glass
- [PATCH v6 098/102] x86: apl: Add P2SB driver
Simon Glass
- [PATCH v7 04/17] x86: apl: Add hostbridge driver
Simon Glass
- [PATCH v7 05/17] x86: apl: Add ITSS driver
Simon Glass
- [PATCH v7 06/17] x86: apl: Add LPC driver
Simon Glass
- [PATCH v7 07/17] x86: apl: Add PCH driver
Simon Glass
- [PATCH v7 08/17] x86: apl: Add PUNIT driver
Simon Glass
- [PATCH v7 09/17] spl: Add methods to find the position/size of next phase
Simon Glass
- [PATCH v7 10/17] x86: apl: Add SPL loaders
Simon Glass
- [PATCH v7 11/17] x86: apl: Add a CPU driver
Simon Glass
- [PATCH v7 12/17] x86: apl: Add SPL/TPL init
Simon Glass
- [PATCH v7 13/17] x86: apl: Add P2SB driver
Simon Glass
- [PATCH v7 14/17] x86: apl: Add Kconfig and Makefile
Simon Glass
- [PATCH v7 15/17] x86: apl: Add FSP structures
Simon Glass
- [PATCH v7 16/17] x86: apl: Add FSP support
Simon Glass
- [PATCH v7 17/17] x86: Add chromebook_coral
Simon Glass
- [PATCH v2 1/4] serial: ns16550: Support run-time configuration
Simon Glass
- [PATCH v2 2/4] x86: Update coreboot serial table struct
Simon Glass
- [PATCH v2 3/4] x86: serial: Add a coreboot serial driver
Simon Glass
- [PATCH v2 4/4] x86: Move coreboot over to use the coreboot UART
Simon Glass
- [PATCH] cros_ec: use uint instead of uint8_t for cmd param
Simon Glass
- [PATCH] gpio: search for gpio label if gpio is not found through bank name
Simon Glass
- [PATCH] bdinfo: show multi_dtb_fit
Simon Glass
- [PATCH v2 2/2] env: Access Environment in SPI flashes before relocation
Simon Glass
- gtlab slow?
Simon Glass
- [PATCH 2/2] configs: sandbox: enable CONFIG_CMD_BOOTEFI_SELFTEST
Simon Glass
- [PATCH 1/2] sandbox: add missing compatible property in device tree
Simon Glass
- [U-Boot] [PATCH 1/1] serial: sandbox: support Unicode
Simon Glass
- [PATCH 1/1] buildman: Improve [make-flags] section parser to allow quoted strings
Simon Glass
- [U-Boot] [PATCH] binman: README: fix default filename of u-boot-with-ucode-ptr
Simon Glass
- [PATCH] i2c: i2c_cdns: fix write timeout on fifo boundary
Simon Glass
- tpm / measured boot in u-boot
Simon Glass
- [PATCH 1/5] remoteproc: elf_loader: Add elf resource table load support
Simon Glass
- dm: rtc: random Gitlab results for dm_test_rtc_dual()
Simon Glass
- [PATCH V2 4/4] pytest: aes: add test for aes192 and aes256
Simon Glass
- [PATCH v2 2/4] regmap: Allow providing read/write callbacks through struct regmap_config
Simon Glass
- [PATCH v8 02/17] i2c: designware: Add Apollo Lake support
Simon Glass
- [PATCH 2/2] configs: sandbox: enable CONFIG_CMD_BOOTEFI_SELFTEST
Simon Glass
- [PATCH 2/2] configs: sandbox: enable CONFIG_CMD_BOOTEFI_SELFTEST
Simon Glass
- Please pull u-boot-dm/next to next branch
Simon Glass
- [PATCH 00/35] common: Further reduce size of common.h even more
Simon Glass
- [PATCH 01/35] common: Drop mdm_init()
Simon Glass
- [PATCH 02/35] common: Move main_loop() to init.h
Simon Glass
- [PATCH 03/35] common: Move flash_perror() to flash.h
Simon Glass
- [PATCH 04/35] common: Drop checkflash() and checkdram()
Simon Glass
- [PATCH 05/35] common: Move embedded fdt location to fdtdec.h
Simon Glass
- [PATCH 06/35] common: Move do_tftpb() to net.h
Simon Glass
- [PATCH 07/35] common: Move functions for loading from fat/ext2 to fs.h
Simon Glass
- [PATCH 08/35] common: Move relocate_code() to init.h
Simon Glass
- [PATCH 09/35] common: Move jumptable_init() out of common.h
Simon Glass
- [PATCH 10/35] common: Drop floppy disk support
Simon Glass
- [PATCH 11/35] common: Move reset_phy() to net.h
Simon Glass
- [PATCH 12/35] common: Move CONFIG_SYS_DEF_EEPROM_ADDR out of common.h
Simon Glass
- [PATCH 13/35] common: Drop CONFIG_POST_STD/ALT_LIST
Simon Glass
- [PATCH 14/35] common: Drop CONFIG_HAS_POST
Simon Glass
- [PATCH 15/35] common: Drop the symbol_lookup() declaration
Simon Glass
- [PATCH 16/35] common: Move type declarations to linux/types.h
Simon Glass
- [PATCH 17/35] common: Move device-tree setup functions to fdt_support.h
Simon Glass
- [PATCH 18/35] common: arm: Move s_init() to an ARM-specific header
Simon Glass
- [PATCH 19/35] common: Move ll_boot_init() to init.h
Simon Glass
- [PATCH 20/35] common: Move upmconfig() to ppc.h
Simon Glass
- [PATCH 21/35] common: Move clock functions into a new file
Simon Glass
- [PATCH 22/35] common: Move get_tbclk() to time.h
Simon Glass
- [PATCH 23/35] common: Move reset_misc() function to arch header
Simon Glass
- [PATCH 24/35] common: Move reset_cpu() to the CPU header
Simon Glass
- [PATCH 25/35] image: Rename load_addr, save_addr, save_size
Simon Glass
- [PATCH 26/35] common: Move the image globals into image.h
Simon Glass
- [PATCH 27/35] common: Rename and move source()
Simon Glass
- [PATCH 28/35] common: Move RAM-sizing functions to init.h
Simon Glass
- [PATCH 29/35] common: Move testdram() into init.h
Simon Glass
- [PATCH 30/35] common: Move hang() to the same header as panic()
Simon Glass
- [PATCH 31/35] common: Move check_member() to kernel.h
Simon Glass
- [PATCH 32/35] common: Move ROUND() into kernel.h
Simon Glass
- [PATCH 33/35] common: Move and rename CONFIG_SYS_SUPPORT_64BIT_DATA
Simon Glass
- [PATCH 34/35] common: Collect all the header files together
Simon Glass
- [PATCH 35/35] common: Update comment to show progress
Simon Glass
- [PATCH v8 02/17] i2c: designware: Add Apollo Lake support
Simon Glass
- [PATCH v3] board_f.c: Insure gd->new_bootstage alignment
Simon Glass
- [PATCH v2 1/4] serial: ns16550: Support run-time configuration
Simon Glass
- [PATCH] binman: fix default filename of u-boot-with-ucode-ptr in documentation
Simon Glass
- [PATCH v3 1/4] serial: ns16550: Support run-time configuration
Simon Glass
- [PATCH v3 2/4] x86: Update coreboot serial table struct
Simon Glass
- [PATCH v3 3/4] x86: serial: Add a coreboot serial driver
Simon Glass
- [PATCH v3 4/4] x86: Move coreboot over to use the coreboot UART
Simon Glass
- [PATCH 0/5] video: Avoid #ifdef to increase build coverage
Simon Glass
- [PATCH 1/5] video: x86: Enable 32-bit graphics by default
Simon Glass
- [PATCH 2/5] video: Avoid using #ifdef in video blitting code
Simon Glass
- [PATCH 3/5] video: Avoid using #ifdef in console_rotate.c
Simon Glass
- [PATCH 4/5] video: Avoid using #ifdef in vidconsole-uclass.c
Simon Glass
- [PATCH 5/5] video: Avoid using #ifdef in video-uclass.c
Simon Glass
- [PATCH 0/5] x86: Improve support for chain-loading U-Boot
Simon Glass
- [PATCH 1/5] x86: fsp: Allow skipping init code when chain loading
Simon Glass
- [PATCH 2/5] x86: apl: Skip init code when chain loading
Simon Glass
- [PATCH 3/5] x86: cpu: Skip init code when chain loading
Simon Glass
- [PATCH 4/5] dm: Avoid initing built-in devices when chain loading
Simon Glass
- [PATCH 5/5] pci: Avoid auto-config when chain loading
Simon Glass
- [PATCH 00/12] i2c: designware_ic2: Improvements to timing
Simon Glass
- [PATCH 01/12] i2c: designware_i2c: Add more registers
Simon Glass
- [PATCH 02/12] i2c: designware_i2c: Don't allow changing IC_CLK
Simon Glass
- [PATCH 03/12] i2c: designware_i2c: Include clk.h in the header file
Simon Glass
- [PATCH 04/12] i2c: designware_i2c: Rename 'max' speed to 'high' speed
Simon Glass
- [PATCH 05/12] i2c: designware_i2c: Use an enum for selected speed mode
Simon Glass
- [PATCH 06/12] i2c: designware_i2c: Use an accurate bus clock instead of MHz
Simon Glass
- [PATCH 07/12] i2c: designware_i2c: Bring in the binding file
Simon Glass
- [PATCH 08/12] i2c: designware_i2c: Read device-tree properties
Simon Glass
- [PATCH 09/12] i2c: designware_i2c: Drop scl_sda_cfg parameter
Simon Glass
- [PATCH 10/12] i2c: designware_i2c: Put hold config in a struct
Simon Glass
- [PATCH 11/12] i2c: designware_i2c: Rewrite timing calculation
Simon Glass
- [PATCH 12/12] i2c: designware_i2c: Add spike supression
Simon Glass
- [PATCH v2 00/13] x86: coral: Add support for Cr50
Simon Glass
- [PATCH v2 01/13] x86: Add a clock driver for Intel devices
Simon Glass
- [PATCH v2 02/13] x86: apl: Use the clock driver
Simon Glass
- [PATCH v2 03/13] x86: apl: Drop the I2C config in FSP-S
Simon Glass
- [PATCH v2 04/13] x86: coral: Update i2c and rtc status
Simon Glass
- [PATCH v2 05/13] dm: irq: Add support for interrupt controller types
Simon Glass
- [PATCH v2 06/13] x86: Give each driver an IRQ type
Simon Glass
- [PATCH v2 07/13] x86: itss: Add of-platdata support
Simon Glass
- [PATCH v2 08/13] dm: irq: Add support for requesting interrupts
Simon Glass
- [PATCH v2 09/13] x86: Add support for ACPI general-purpose events
Simon Glass
- [PATCH v2 10/13] x86: coral: Add I2C and TPM device-tree definitions
Simon Glass
- [PATCH v2 11/13] tpm: Add more TPM2 definitions
Simon Glass
- [PATCH v2 12/13] tpm: Add a driver for H1/Cr50
Simon Glass
- [PATCH v2 13/13] x86: coral: Enable TPM
Simon Glass
- [PATCH 0/5] x86: Improve support for chain-loading U-Boot
Simon Glass
- [PATCH V3 1/5] aes: add a define for the size of a block
Simon Glass
- [PATCH V3 2/5] aes: add support of aes192 and aes256
Simon Glass
- [PATCH V3 3/5] tegra20: crypto: update code to use new aes api
Simon Glass
- [PATCH V3 4/5] aes: add test unit for aes128
Simon Glass
- [PATCH V3 5/5] aes: add test unit for aes196 and aes256
Simon Glass
- [PATCH v2 2/4] regmap: Allow providing read/write callbacks through struct regmap_config
Simon Glass
- `uclass_find_device_by_name` fails to find the device
Simon Glass
- [PATCH v2 2/4] dm: board: complete the initialization of the muxes in initr_dm()
Simon Glass
- [PATCH v2 3/4] drivers: mux: mmio-based syscon mux controller
Simon Glass
- [PATCH v2 4/4] test: Add tests for the multiplexer framework
Simon Glass
- [PATCH v2 1/4] drivers: Add a new framework for multiplexer devices
Simon Glass
- [PATCH v2 4/4] test: Add tests for the multiplexer framework
Simon Glass
- [RFC 1/1] efi_loader: support building UEFI binaries on sandbox
Simon Glass
- [PATCH 1/2] Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA
Simon Glass
- [PATCH 2/2] dma: Add stub of dma_memcpy and dma_get_device
Simon Glass
- [PATCH] test: Fix the boardspec for the SPL handoff test
Simon Glass
- [U-Boot][RESEND PATCH 08/10] board: ge: pass rtc_status via device tree
Simon Glass
- [U-Boot][RESEND PATCH 10/10] board: ge: mx53ppd: use imx wdt
Simon Glass
- [PATCH v4 0/7] usb: kbd: implement special keys
Simon Glass
- [PATCH] blk: Check if_type in blk_get_devnum_by_typename
Simon Glass
- [RFC PATCH 1/1] doc: net: Rewrite network driver documentation
Simon Glass
- [PATCH 2/2] bootm: Add a bootm command for type IH_OS_EFI
Simon Glass
- [PATCH v3] arm: add acpi support for the arm
Simon Glass
- [PATCH 1/1] test/py: use valid device tree in test_fit.py
Simon Glass
- [PATCH 02/35] common: Move main_loop() to init.h
Simon Glass
- [PATCH 14/35] common: Drop CONFIG_HAS_POST
Simon Glass
- [PATCH v2] spl: Introduce SPL_DM_GPIO Kconfig define
Simon Glass
- [PATCH v2 12/13] tpm: Add a driver for H1/Cr50
Simon Glass
- [PATCH v4 0/7] usb: kbd: implement special keys
Simon Glass
- [PATCH 1/3] ata: sata_sil: Continue probing other sata port when failed current port.
Simon Glass
- [PATCH 2/3] ata: fsl_sata: Continue probing other sata port when failed current port.
Simon Glass
- [PATCH 3/3] cmd: sata: Add block unbind device function
Simon Glass
- [PATCH v5 4/6] lib: rsa: generate additional parameters for public key
Simon Glass
- [PATCH v5 6/6] test: add rsa_verify() unit test
Simon Glass
- [PATCH v4 15/16] sandbox: add extra configurations for UEFI and related tests
Simon Glass
- [ubiblock PATCH] Read-only block driver on top of UBI volumes
Simon Glass
- [U-Boot] [PATCH] spi: prevent overriding established bus settings
Simon Glass
- [PATCH 1/2] cmd: bcm: logsetup: Add Broadcom error log setup command
Simon Glass
- [PATCH 2/2] common: Add DDR error logging (ELOG) support for Broadcom boards
Simon Glass
- [PATCH v2 3/3] env: Provide programmatic equivalent to 'setenv -f'
Simon Glass
- [PATCH 1/1] cmd: gpt: Enumerate partitions and save info into an U-Boot variable
Simon Glass
- [PATCH v2 1/4] dfu: Drop unused prototype of dfu_trigger_reset()
Simon Glass
- [PATCH v2 2/4] dfu: Refactor do_dfu() to handle optional argument
Simon Glass
- [PATCH v2 3/4] dfu: Add optional timeout parameter
Simon Glass
- [PATCH v2 4/4] x86: edison: Enable DFU timeout
Simon Glass
- [PATCH 1/7] dm: rng: Add random number generator(rng) uclass
Simon Glass
- [PATCH 6/7] configs: sandbox: Enable random number generator(rng) device
Simon Glass
- [PATCH 7/7] test: rng: Add basic test for random number generator(rng) uclass
Simon Glass
- [PATCH 5/7] sandbox: rng: Add a random number generator(rng) driver
Simon Glass
- flashing and testing u-boot on chromebook_bob
Simon Glass
- [RESEND PATCH 1/7] clk: mediatek: mt7629: add support for ssusbsys
Simon Glass
- [RESEND PATCH 2/7] clk: fix error check for devm_clk_get_optional()
Simon Glass
- [RESEND PATCH 3/7] clk: check valid clock by clk_valid()
Simon Glass
- [RESEND PATCH 4/7] clk: add APIs to get (optional) clock by name without a device
Simon Glass
- [RESEND PATCH 5/7] clk: fixed_rate: add dummy enable() function
Simon Glass
- [RESEND PATCH 6/7] phy: phy-mtk-tphy: remove the check of -ENOSYS
Simon Glass
- [RESEND PATCH 7/7] phy: phy-mtk-tphy: make ref clock optional
Simon Glass
- commit "dm: spi: Avoid setting the speed with every transfer"
Simon Glass
- [PATCH] log: Include missing header for log.h
Simon Glass
- [PATCH v2 00/35] common: Further reduce size of common.h even more
Simon Glass
- [PATCH v2 01/35] common: Drop mdm_init()
Simon Glass
- [PATCH v2 02/35] common: Move main_loop() to init.h
Simon Glass
- [PATCH v2 03/35] common: Move flash_perror() to flash.h
Simon Glass
- [PATCH v2 04/35] common: Drop checkflash() and checkdram()
Simon Glass
- [PATCH v2 05/35] common: Move embedded fdt location to fdtdec.h
Simon Glass
- [PATCH v2 06/35] common: Move do_tftpb() to net.h
Simon Glass
- [PATCH v2 07/35] common: Move functions for loading from fat/ext2 to fs.h
Simon Glass
- [PATCH v2 08/35] common: Move relocate_code() to init.h
Simon Glass
- [PATCH v2 09/35] common: Move jumptable_init() out of common.h
Simon Glass
- [PATCH v2 10/35] common: Drop floppy disk support
Simon Glass
- [PATCH v2 11/35] common: Move reset_phy() to net.h
Simon Glass
- [PATCH v2 12/35] common: Move CONFIG_SYS_DEF_EEPROM_ADDR out of common.h
Simon Glass
- [PATCH v2 13/35] common: Drop CONFIG_POST_STD/ALT_LIST
Simon Glass
- [PATCH v2 14/35] common: Drop CONFIG_HAS_POST
Simon Glass
- [PATCH v2 15/35] common: Drop the symbol_lookup() declaration
Simon Glass
- [PATCH v2 16/35] common: Move type declarations to linux/types.h
Simon Glass
- [PATCH v2 17/35] common: Move device-tree setup functions to fdt_support.h
Simon Glass
- [PATCH v2 18/35] common: arm: Move s_init() to an ARM-specific header
Simon Glass
- [PATCH v2 19/35] common: Move ll_boot_init() to init.h
Simon Glass
- [PATCH v2 20/35] common: Move upmconfig() to ppc.h
Simon Glass
- [PATCH v2 21/35] common: Move clock functions into a new file
Simon Glass
- [PATCH v2 22/35] common: Move get_tbclk() to time.h
Simon Glass
- [PATCH v2 23/35] common: Move reset_misc() function to arch header
Simon Glass
- [PATCH v2 24/35] common: Move reset_cpu() to the CPU header
Simon Glass
- [PATCH v2 25/35] image: Rename load_addr, save_addr, save_size
Simon Glass
- [PATCH v2 26/35] common: Move the image globals into image.h
Simon Glass
- [PATCH v2 27/35] common: Rename and move source()
Simon Glass
- [PATCH v2 28/35] common: Move RAM-sizing functions to init.h
Simon Glass
- [PATCH v2 29/35] common: Move testdram() into init.h
Simon Glass
- [PATCH v2 30/35] common: Move hang() to the same header as panic()
Simon Glass
- [PATCH v2 31/35] common: Move check_member() to kernel.h
Simon Glass
- [PATCH v2 32/35] common: Move ROUND() into kernel.h
Simon Glass
- [PATCH v2 33/35] common: Move and rename CONFIG_SYS_SUPPORT_64BIT_DATA
Simon Glass
- [PATCH v2 34/35] common: Collect all the header files together
Simon Glass
- [PATCH v2 35/35] common: Update comment to show progress
Simon Glass
- [PATCH PATCH v6 13/13] spl: fit: Allow the board to tell if more images must be loaded from FIT
Simon Glass
- [PATCH v4 0/7] usb: kbd: implement special keys
Simon Glass
- [PATCH v6 6/8] configs: sandbox: Enable random number generator(rng) device
Simon Glass
- [PATCH v2 01/14] dm: pinctrl: convert pinctrl-single to livetree
Simon Glass
- [PATCH v2 02/14] dm: core: add ofnode and dev function to iterate on node property
Simon Glass
- [PATCH v2 03/14] dm: pinctrl: migrate pinctrl-generic to livetree
Simon Glass
- [PATCH v2 06/14] gpio: remove the open_drain API and ops
Simon Glass
- [PATCH v2 07/14] gpio: add gpio descriptor initialization helper
Simon Glass
- [PATCH v2 08/14] gpio: add ops for configuration with dir flags
Simon Glass
- [PATCH v2 13/14] test: dm: update test for pins configuration in gpio
Simon Glass
- [PATCH v2 14/14] test: pinmux: add pincontrol-gpio for pin configuration
Simon Glass
- [PATCH v1 1/2] Makefile: Fix CONFIG_SYS_UBOOT_START default value
Simon Glass
- [PATCH 14/20] serial_lpuart: add clock enable if CONFIG_CLK is defined
Simon Glass
- [PATCH 1/2] menu: Make some parts of the menu available to other components
Simon Glass
- [PATCH] spl_fit.c: enable loading compressed u-boot from fit image
Simon Glass
- [U-Boot] [PATCH v4 4/5] dm: core: Don't include ofnode functions with of-platdata
Simon Glass
- [PATCH PATCH v6 04/13] spl: fit: allocate a temporary buffer to load the overlays
Simon Glass
- [PATCH PATCH v6 10/13] drivers: board: Add get_fit_loadable()
Simon Glass
- [PATCH PATCH v6 12/13] dts: Add support for adding DT overlays in u-boot.img
Simon Glass
- [PATCH PATCH v6 00/13] Add support for applications of overlays in SPL
Simon Glass
- [PATCH 00/19] dm: core: Fully separate ofdata_to_platdata() from probe()
Simon Glass
- [PATCH 01/19] common: Add a noisy assert()
Simon Glass
- [PATCH 02/19] dm: core: Use assert_noisy() in devres
Simon Glass
- [PATCH 03/19] usb: Drop use of BUG_ON() and WARN_ON()
Simon Glass
- [PATCH 04/19] x86: apl: Avoid accessing the PCI bus before it is probed
Simon Glass
- [PATCH 05/19] pci: Print a warning if the bus is accessed before probing
Simon Glass
- [PATCH 06/19] aspeed: ast2500: Read clock ofdata in the correct method
Simon Glass
- [PATCH 07/19] dm: core: Don't clear active flag twice when probe() fails
Simon Glass
- [PATCH 08/19] dm: core: Move ofdata_to_platdata() call earlier
Simon Glass
- [PATCH 09/19] dm: core: Allocate parent data separate from probing parent
Simon Glass
- [PATCH 10/19] dm: core: Add a comment for DM_FLAG_OF_PLATDATA
Simon Glass
- [PATCH 11/19] dm: core: Export a new function to read platdata
Simon Glass
- [PATCH 12/19] dm: core: Add a new flag to track platform data
Simon Glass
- [PATCH 13/19] dm: devres: Create a new devres header file
Simon Glass
- [PATCH 14/19] test: Add functions to find the amount of allocated memory
Simon Glass
- [PATCH 15/19] dm: devres: Convert to use logging
Simon Glass
- [PATCH 16/19] dm: test: Add a test driver for devres
Simon Glass
- [PATCH 17/19] dm: devres: Add tests
Simon Glass
- [PATCH 18/19] dm: devres: Use an enum for the allocation phase
Simon Glass
- [PATCH 19/19] dm: devres: Add a new OFDATA phase
Simon Glass
- [PATCH] arm: dts: bcm283x: Allow UARTs to work before relocation
Simon Glass
- [U-Boot] [PATCH 0/4] omapl138_lcdk: fix MMC boot
Bartosz Golaszewski
- [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code
Simon Goldschmidt
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [U-Boot] [PATCH v2] spl: Allow cache drivers to be used in SPL
Simon Goldschmidt
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [U-Boot] [PATCH] spi: cadence_qspi_apb: fix QSPI write issues
Simon Goldschmidt
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Simon Goldschmidt
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Simon Goldschmidt
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Simon Goldschmidt
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Simon Goldschmidt
- Pull request: socfpga-next
Simon Goldschmidt
- Pull request: socfpga-next
Simon Goldschmidt
- [PATCH v2 1/4] serial: ns16550: Support run-time configuration
Simon Goldschmidt
- Pull request: socfpga-next
Simon Goldschmidt
- Pull request: socfpga-next
Simon Goldschmidt
- [PATCH 01/35] common: Drop mdm_init()
Simon Goldschmidt
- [PATCH 02/35] common: Move main_loop() to init.h
Simon Goldschmidt
- [PATCH 02/35] common: Move main_loop() to init.h
Simon Goldschmidt
- [PATCH] configs: socfpga: fix building Stratix10 and Agilex
Simon Goldschmidt
- [PATCH] doc: really get rid of Documentation/ directory
Simon Goldschmidt
- [PATCH] configs: socfpga: fix building Stratix10 and Agilex
Simon Goldschmidt
- [U-Boot] [PATCH 1/1] efi_loader: pass address to efi_install_fdt()
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: pass address to efi_install_fdt()
Alexander Graf
- [U-Boot] [PATCH 1/1] efi_loader: pass address to efi_install_fdt()
Alexander Graf
- [RESEND PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion
Oliver Graute
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Oliver Graute
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Oliver Graute
- [PATCH v1 1/2] imx: imx8qm_rom7720: added missing USDHC Base address defines
Oliver Graute
- [PATCH v1 2/2] imx: imx8qm_rom7720_a1: fix broken fsl_esdhc_imx conversion
Oliver Graute
- [PATCH 1/2] video: add guards around 16bpp/32bbp code
Anatolij Gustschin
- [PATCH 2/2] video: make BPP and ANSI configs optional
Anatolij Gustschin
- [PATCH 2/2] video: make BPP and ANSI configs optional
Anatolij Gustschin
- [U-Boot] Maximum size of u-boot.imx for TBS2910 board
Anatolij Gustschin
- [PATCH] imx: dts: tbs2910: add u-boot dtsi to shrink image size
Anatolij Gustschin
- [PATCH v2 1/2] video: bmp: Fix video_splash_align_axis()
Anatolij Gustschin
- [PATCH v2 2/2] video: bmp: Fix video_display_rle8_bitmap()
Anatolij Gustschin
- [PATCH 1/2] video: add guards around 16bpp/32bbp code
Anatolij Gustschin
- [PATCH 2/2] video: make BPP and ANSI configs optional
Anatolij Gustschin
- Please pull u-boot-video
Anatolij Gustschin
- 回复: [PATCH v3] arm: add acpi support for the arm
Steven Hao
- [PATCH v3] arm: add acpi support for the arm
Steven Hao
- [PATCH] ram: rk3399: don't assume phy_io_config() uses real regs
Thomas Hebb
- [PATCH] stm32mp: remove redundant SYS_TEXT_BASE prompt
Thomas Hebb
- [RESEND PATCH] rockchip: add description for TPL_ROCKCHIP_COMMON_BOARD
Thomas Hebb
- [PATCH v2] cosmetic: Fix spelling and whitespace errors
Tom Hebb
- [U-Boot] [PATCH v3 0/4] arm64: sun50i: Add support for Orange Pi 3
Andre Heider
- [U-Boot] [PATCH v3 1/4] sunxi: board: extract creating a unique sid into a helper function
Andre Heider
- [U-Boot] [PATCH v3 2/4] arm: sunxi: add a config option to fixup a Bluetooth address
Andre Heider
- [U-Boot] [PATCH v3 3/4] arm64: dts: sync Allwinner H6 files
Andre Heider
- [U-Boot] [PATCH v3 4/4] arm64: dts: sun50i: Add support for Orange Pi 3
Andre Heider
- [PATCH v3 0/4] arm64: sun50i: Add support for Orange Pi 3
Andre Heider
- [U-Boot] [ANNOUNCEMENT] Expect ML downtime at 2019-12-03 11:00 CET
Claudius Heine
- [U-Boot] [ANNOUNCEMENT] Expect ML downtime at 2019-12-03 11:00 CET
Claudius Heine
- [U-Boot] [ANNOUNCEMENT] Expect ML downtime at 2019-12-03 11:00 CET
Claudius Heine
- [U-Boot] [ANNOUNCEMENT] Expect ML downtime at 2019-12-03 11:00 CET
Claudius Heine
- gtlab slow?
Claudius Heine
- [U-Boot] [RESEND PATCH] net: tftp: Fix tftp store address check in store_block()
Joe Hershberger
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Joe Hershberger
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Joe Hershberger
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Joe Hershberger
- [U-Boot] [PATCH v2 1/1] net: avoid address-of-packed-member error
Joe Hershberger
- [U-Boot] [PATCH] cmd: pxe: Increase maximum path length
Joe Hershberger
- [PATCH] net: nfs: Only link in NFS code outside of SPL builds
Joe Hershberger
- [U-Boot] [PATCH] phy: atheros: add some debug output
Joe Hershberger
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Joe Hershberger
- Pull request: u-boot-net.git master
Joe Hershberger
- [PATCH 1/1] common: remove duplicate typedef for uchar
Joe Hershberger
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Joe Hershberger
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Joe Hershberger
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Joe Hershberger
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Joe Hershberger
- [PATCH] net: dwc_eth_qos: Pass -1 to phy_connect() to scan for all PHYs
Joe Hershberger
- [PATCH] drivers: net: bcm-sf2: pass -1 to phy_connect()
Joe Hershberger
- [PATCH 0/2] amlogic: add Khadas VIM3L support
Christian Hewitt
- [PATCH 1/2] ARM: dts: Import Khadas VIM3L DT from Linux 5.5-rc1
Christian Hewitt
- [PATCH 2/2] boards: amlogic: add Khadas VIM3L support
Christian Hewitt
- [PATCH v2 2/4] regmap: Allow providing read/write callbacks through struct regmap_config
Jean-Jacques Hiblot
- [PATCH PATCH v6 00/13] Add support for applications of overlays in SPL
Jean-Jacques Hiblot
- [PATCH 0/2] amlogic: add Khadas VIM3L support
Kevin Hilman
- [PATCH 0/2] pci: layerscape: Fix the BARs disable function in RC mode
Z.q. Hou
- [PATCH 1/2] pci: layerscape: Fix the disabling of Expansion ROM BAR
Z.q. Hou
- [PATCH 2/2] pci: layerscape: Fix the BARs disable function
Z.q. Hou
- OMAP L138 LCDK - giving up maintainership
Peter Howard
- OMAP L138 LCDK - giving up maintainership
Peter Howard
- [U-Boot] pull request u-boot-fsl-qoriq
Priyanka Jain
- [U-Boot] [PATCH v3] armv8: ls1028a: Add environment variables to facilitate the boot
Priyanka Jain
- [U-Boot] [PATCH v2] configs: ls1028a: enable CMD_DM
Priyanka Jain
- [U-Boot] [PATCH] board: fsl: lx2160a: Fix the typo in board_fix_fdt
Priyanka Jain
- [U-Boot] [v3] include/configs: ls1012a: add pfe stop command
Priyanka Jain
- [U-Boot] [v2] armv8: ls1043aqds: modify the qspi_bootcmd definition
Priyanka Jain
- [U-Boot] [PATCH] configs: ls1028a: enable OF_LIBFDT_OVERLAY
Priyanka Jain
- [U-Boot] pull request u-boot-fsl-qoriq
Priyanka Jain
- [PATCH 5/5] arch: armv8: fsl-layerscape: export serdes config to environment
Priyanka Jain
- [PATCH v3 3/6] test: dm: add a simple unit test for DSA class
Priyanka Jain
- [PATCH 2/2] drivers: net: phy: aquantia: make it less verbose
Priyanka Jain
- [PATCH 1/2] drivers: net: phy: aquantia: drop XGMII as a valid system interface proto
Priyanka Jain
- [v3 1/8] rtc: pcf8563: support driver model
Priyanka Jain
- [v3 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Priyanka Jain
- [v3 4/8] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN
Priyanka Jain
- [v3 5/8] dm: ls1012a: add i2c DM support
Priyanka Jain
- [v3 6/8] dm: arm: ls1043a: add i2c DM support
Priyanka Jain
- [v3 7/8] dm: arm: ls1046a: add i2c DM support
Priyanka Jain
- [PATCH v1 1/3] enable ls1046afwry usb network card
Priyanka Jain
- [PATCH v1 3/3] enable ls1046afwry usb network card
Priyanka Jain
- [Patch v2 2/7] treewide: Remove unused FSL QSPI config options
Priyanka Jain
- [Patch v2 1/7] spi: Transform the FSL QuadSPI driver to use the SPI MEM API
Priyanka Jain
- [U-Boot] [PATCH v2 1/2] spi: nxp_fspi: new driver for the FlexSPI controller
Priyanka Jain
- [PATCH] ddr: fsl: Impl. Erratum A008109
Priyanka Jain
- [v2 1/5] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"
Priyanka Jain
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Priyanka Jain
- [v3 1/5] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"
Priyanka Jain
- [U-Boot] [PATCH 1/3] PCI: layerscape: Add Support for ls2085a and ls2080a EP mode
Priyanka Jain
- [v7 1/8] rtc: pcf8563: Add driver model support
Priyanka Jain
- pull request u-boot-mpc85xx to next branch
Priyanka Jain
- [PATCH 1/4] ppc/km/tegr1: support second localbus clock signal
Priyanka Jain
- [PATCH v3] ppc/km: enable DM driver support in all defconfigs
Priyanka Jain
- [PATCH v2 01/19] arch: powerpc: add usb node in p3041 dts
Priyanka Jain
- [PATCH] mpc85xx: ddr: Always start DDR RAM in Self Refresh mode
Priyanka Jain
- [PATCH v3 6/9] pci: layerscape: Common device tree fixup for NXP SoCs
Priyanka Jain
- Boot from different partitions based on some condition
Mats Jansson
- [PATCH] tools/imximage: fix reported DCD information for MX7ULP
Jorge Ramirez-Ortiz, Foundries
- [U-Boot] [PATCH] tools/imximage: fix reported DCD information for MX7ULP
Jorge Ramirez-Ortiz, LDTS
- Repeating of unknown commands
Martin Kaistra
- CONFIG_AUTOBOOT_KEYED_CTRLC default yes?
Zubair Lutfullah Kakakhel
- [U-Boot] [PATCH 16/17] imx: add dtsi for i.MX8MN
Troy Kisky
- [U-Boot] [PATCH 16/17] imx: add dtsi for i.MX8MN
Troy Kisky
- [U-Boot] [PATCH 16/17] imx: add dtsi for i.MX8MN
Troy Kisky
- [PATCH v2 2/2] ARM: i.MX6: TARGET_NITROGEN6X: add 'select MX6QDL'
Troy Kisky
- [PATCH] ARM: dts: xilinx: Fix I2C and SPI bus warnings
Florian Klink
- [PATCH 1/2] rockchip: misc: Only assign serial# variable if unset
Paul Kocialkowski
- [PATCH 2/2] rockchip: misc: Don't fail if ethaddr is already set
Paul Kocialkowski
- [PATCH 1/2] rockchip: misc: Only assign serial# variable if unset
Paul Kocialkowski
- [PATCH v5 7/7] doc: boards: Add rockchip documentation
Matwey V. Kornilov
- [PATCH v5 7/7] doc: boards: Add rockchip documentation
Matwey V. Kornilov
- [PATCH v5 6/7] rockchip: Add Single boot image (with binman, pad_cat)
Matwey V. Kornilov
- [PATCH v5 6/7] rockchip: Add Single boot image (with binman, pad_cat)
Matwey V. Kornilov
- U-boot building problem. please advice
Ilya Krasavin
- [U-Boot] [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Ashish Kumar
- [PATCH v1] serdes: ls1046afwry: Disable sgmi support
Pramod Kumar
- [PATCH v4] armv8: ls1046afrwy: Fix get_board_version implementation
Pramod Kumar
- [PATCH v2] serdes: ls1046afwry: Disable sgmi support
Pramod Kumar
- [PATCH v3] board: ls1046afwry: Disable sgmii support
Pramod Kumar
- [PATCH 2/7] clk: mediatek: adjust common driver for mt8512
Mingming Lee
- [PATCH 2/7] clk: mediatek: adjust common driver for mt8512
Ryder Lee
- [PATCH 1/7] ARM: MediaTek: Add support for MediaTek MT8512 SoC
Ryder Lee
- [RESEND PATCH 1/7] clk: mediatek: mt7629: add support for ssusbsys
Ryder Lee
- [v3 1/8] rtc: pcf8563: support driver model
Biwen Li
- [v3 2/8] armv8: fsl-layerscape: spl: fix build error when DM_I2C is enabled
Biwen Li
- [v3 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Biwen Li
- [v3 4/8] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN
Biwen Li
- [v3 5/8] dm: ls1012a: add i2c DM support
Biwen Li
- [v3 6/8] dm: arm: ls1043a: add i2c DM support
Biwen Li
- [v3 7/8] dm: arm: ls1046a: add i2c DM support
Biwen Li
- [v3 8/8] dm: arm: ls1021a: add i2c DM support
Biwen Li
- [v3 1/8] rtc: pcf8563: support driver model
Biwen Li
- [v4 1/8] rtc: pcf8563: Add driver model support
Biwen Li
- [v4 2/8] armv8: fsl-layerscape: spl: fix build error when DM_I2C is enabled
Biwen Li
- [v4 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Biwen Li
- [v4 4/8] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN
Biwen Li
- [v4 5/8] dm: ls1012a: add i2c DM support
Biwen Li
- [v4 6/8] dm: arm: ls1043a: add i2c DM support
Biwen Li
- [v4 7/8] dm: arm: ls1046a: add i2c DM support
Biwen Li
- [v4 8/8] dm: arm: ls1021a: add i2c DM support
Biwen Li
- [v5 1/8] rtc: pcf8563: Add driver model support
Biwen Li
- [v5 2/8] armv8: fsl-layerscape: spl: fix build error when DM_I2C is enabled
Biwen Li
- [v5 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Biwen Li
- [v5 4/8] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN
Biwen Li
- [v5 5/8] dm: arm64: ls1012a: add i2c DM support
Biwen Li
- [v5 6/8] dm: arm64: ls1043a: add i2c DM support
Biwen Li
- [v5 7/8] dm: arm64: ls1046a: add i2c DM support
Biwen Li
- [v5 8/8] dm: arm: ls1021a: add i2c DM support
Biwen Li
- [PATCH] armv8: kconfig: remove warnings when generate
Biwen Li
- [v2] armv8: fsl-layerscape: Kconfig: Correct I2C dependecies
Biwen Li
- [v6 1/8] rtc: pcf8563: Add driver model support
Biwen Li
- [v6 2/8] armv8: fsl-layerscape: spl: fix build error when DM_I2C is enabled
Biwen Li
- [v6 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Biwen Li
- [v6 4/8] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN
Biwen Li
- [v6 5/8] dm: arm64: ls1012a: add i2c DM support
Biwen Li
- [v6 6/8] dm: arm64: ls1043a: add i2c DM support
Biwen Li
- [v6 7/8] dm: arm64: ls1046a: add i2c DM support
Biwen Li
- [v6 8/8] dm: arm: ls1021a: add i2c DM support
Biwen Li
- [EXT] Re: [v5 8/8] dm: arm: ls1021a: add i2c DM support
Biwen Li
- [v2] armv8: fsl-layerscape: Kconfig: Correct I2C dependecies
Biwen Li
- [EXT] Re: [v6 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Biwen Li
- [EXT] Re: [v6 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Biwen Li
- [v7 1/8] rtc: pcf8563: Add driver model support
Biwen Li
- [v7 2/8] armv8: fsl-layerscape: spl: fix build error when DM_I2C is enabled
Biwen Li
- [v7 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Biwen Li
- [v7 4/8] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN
Biwen Li
- [v7 5/8] dm: arm64: ls1012a: add i2c DM support
Biwen Li
- [v7 6/8] dm: arm64: ls1043a: add i2c DM support
Biwen Li
- [v7 7/8] dm: arm64: ls1046a: add i2c DM support
Biwen Li
- [v7 8/8] dm: arm: ls1021a: add i2c DM support
Biwen Li
- [RESEND v7 1/8] rtc: pcf8563: Add driver model support
Biwen Li
- [RESEND v7 2/8] armv8: fsl-layerscape: spl: fix build error when DM_I2C is enabled
Biwen Li
- [RESEND v7 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Biwen Li
- [RESEND v7 4/8] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN
Biwen Li
- [RESEND v7 5/8] dm: arm64: ls1012a: add i2c DM support
Biwen Li
- [RESEND v7 6/8] dm: arm64: ls1043a: add i2c DM support
Biwen Li
- [RESEND v7 7/8] dm: arm64: ls1046a: add i2c DM support
Biwen Li
- [RESEND v7 8/8] dm: arm: ls1021a: add i2c DM support
Biwen Li
- [v7 1/8] rtc: pcf8563: Add driver model support
Biwen Li
- [v8 1/8] rtc: pcf8563: Add driver model support
Biwen Li
- [v8 2/8] armv8: fsl-layerscape: spl: fix build error when DM_I2C is enabled
Biwen Li
- [v8 3/8] i2c: mxc_i2c: add DM_FLAG_PRE_RELOC flag
Biwen Li
- [v8 4/8] Kconfigs: layerscape: use a convenient default value for SYS_MALLOC_F_LEN
Biwen Li
- [v8 5/8] dm: arm64: ls1012a: add i2c DM support
Biwen Li
- [v8 6/8] dm: arm64: ls1043a: add i2c DM support
Biwen Li
- [v8 7/8] dm: arm64: ls1046a: add i2c DM support
Biwen Li
- [v8 8/8] dm: arm: ls1021a: add i2c DM support
Biwen Li
- [PATCH v1] colibri_imx7: disable HAB and CAAM support
Breno Matheus Lima
- [PATCH 0/6] Clean up eSDHC periperhal clock code
Y.b. Lu
- [PATCH 0/6] Clean up eSDHC periperhal clock code
Yangbo Lu
- [PATCH 1/6] mmc: fsl_esdhc_imx: drop QorIQ eSDHC specific peripheral clock code
Yangbo Lu
- [PATCH 2/6] mmc: fsl_esdhc: drop useless fdt fixup
Yangbo Lu
- [PATCH 3/6] powerpc/mpc85xx: drop eSDHC periperhal clock code
Yangbo Lu
- [PATCH 4/6] Add global variable sdhc_per_clk for arm/powerpc
Yangbo Lu
- [PATCH 5/6] configs: ls1028a: use default SDHC clock divider value
Yangbo Lu
- [PATCH 6/6] Drop CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK usage
Yangbo Lu
- Issue with mmc command set
Amarnath MB
- [PATCH 0/1] Small patch series to add support for VoCore2 board.
MCon
- [PATCH 1/1] Port to new board "VoCore2"
MCon
- [U-Boot] [v2 1/5] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"
Peng Ma
- [U-Boot] [v2 2/5] Revert "powerpc: mpc85xx: delete FSL_SATA for T2080QDS board."
Peng Ma
- [U-Boot] [v2 3/5] Revert "configs: enable sata device module in T2080QDS"
Peng Ma
- [U-Boot] [v2 4/5] arch: powerpc: Rewrite the sata node to fit the driver
Peng Ma
- [U-Boot] [PATCH 5/5] ata: fsl_sata: Update fsl sata header file
Peng Ma
- [U-Boot] [EXT] Re: [v2 1/5] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"
Peng Ma
- [PATCH 1/3] ata: sata_sil: Continue probing other sata port when failed current port.
Peng Ma
- [PATCH 2/3] ata: fsl_sata: Continue probing other sata port when failed current port.
Peng Ma
- [PATCH 3/3] cmd: sata: Add block unbind device function
Peng Ma
- [v3 1/5] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"
Peng Ma
- [v3 2/5] Revert "powerpc: mpc85xx: delete FSL_SATA for T2080QDS board."
Peng Ma
- [v3 3/5] Revert "configs: enable sata device module in T2080QDS"
Peng Ma
- [v3 4/5] arch: powerpc: Rewrite the sata node to fit the driver
Peng Ma
- [v3 5/5] ata: fsl_sata: Update fsl sata header file
Peng Ma
- [v4 1/4] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"
Peng Ma
- [v4 2/4] Revert "powerpc: mpc85xx: delete FSL_SATA for T2080QDS board."
Peng Ma
- [v4 3/4] Revert "configs: enable sata device module in T2080QDS"
Peng Ma
- [v4 4/4] arch: powerpc: Rewrite the sata node to fit the driver
Peng Ma
- [EXT] Re: [PATCH 3/3] cmd: sata: Add block unbind device function
Peng Ma
- [EXT] Re: [PATCH 1/3] ata: sata_sil: Continue probing other sata port when failed current port.
Peng Ma
- [EXT] Re: [PATCH 2/3] ata: fsl_sata: Continue probing other sata port when failed current port.
Peng Ma
- [U-Boot] [GIT] Pull request: u-boot-dfu (29.11.2019)
Lukasz Majewski
- [U-Boot] [RESEND PATCH v2] spl: Introduce SPL_DM_GPIO Kconfig define
Lukasz Majewski
- [PATCH v1 3/5] colibri_imx6: add update_uboot wrapper
Lukasz Majewski
- [PATCH v4 1/6] fat: write: fix broken write to fragmented files
Lukasz Majewski
- Sourcing a signed boot script
Lukasz Majewski
- [RESEND PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion
Lukasz Majewski
- [PATCH v1 2/2] treewide: Remove CONFIG_SYS_UBOOT_START from configs board files
Lukasz Majewski
- [PATCH 06/20] clk: imx: pllv3: add disable() support
Lukasz Majewski
- [PATCH 07/20] clk: imx: pllv3: add set_rate() support
Lukasz Majewski
- [PATCH 08/20] clk: imx: pllv3: add PLLV3_SYS support
Lukasz Majewski
- [PATCH 04/20] clk: imx: pllv3: set div_mask differently if PLLV3 is GENERIC or USB
Lukasz Majewski
- [PATCH 03/20] clk: imx: pllv3: register PLLV3 GENERIC and USB as 2 different clocks
Lukasz Majewski
- [PATCH 02/20] spl: fix entry_point equal to load_addr
Lukasz Majewski
- [PATCH 10/20] clk: imx: pfd: add set_rate()
Lukasz Majewski
- [PATCH 11/20] clk: imx: add i.IMXRT1050 clk driver
Lukasz Majewski
- [PATCH 12/20] pinctrl: add i.MXRT driver
Lukasz Majewski
- [PATCH 13/20] ARM: dts: imxrt1050: add dtsi file
Lukasz Majewski
- [PATCH 14/20] serial_lpuart: add clock enable if CONFIG_CLK is defined
Lukasz Majewski
- [PATCH 15/20] serial_lpuart: add support for i.MXRT
Lukasz Majewski
- [PATCH 09/20] clk: imx: pllv3: add support for PLLV3_AV type
Lukasz Majewski
- [PATCH v6] imx: Add support for i.MX28 based XEA board
Lukasz Majewski
- [PATCH 11/20] clk: imx: add i.IMXRT1050 clk driver
Lukasz Majewski
- [PATCH 12/20] pinctrl: add i.MXRT driver
Lukasz Majewski
- [PATCH 14/20] serial_lpuart: add clock enable if CONFIG_CLK is defined
Lukasz Majewski
- [PATCH 09/20] clk: imx: pllv3: add support for PLLV3_AV type
Lukasz Majewski
- [PATCH] cmd/eeprom.c: prepend 0x to hex numbers in output message format
Lukasz Majewski
- [PATCH 12/20] pinctrl: add i.MXRT driver
Lukasz Majewski
- [PATCH 09/20] clk: imx: pllv3: add support for PLLV3_AV type
Lukasz Majewski
- [PATCH] clk: uclass: clk_get_by_name() must not be available if CONFIG_OF_PLATDATA is enabled
Lukasz Majewski
- [PATCH] clk: uclass: clk_get_by_name() must not be available if CONFIG_OF_PLATDATA is enabled
Lukasz Majewski
- [PATCH] clk: uclass: clk_get_by_name() must not be available if CONFIG_OF_PLATDATA is enabled
Lukasz Majewski
- [PATCH] cmd: spi: Permit setting bus frequency
Lukasz Majewski
- [U-Boot] amlogic a96 mini
Belisko Marek
- [U-Boot] [PATCH] configs: ls1028aqds: enable mdio muxing by default
Alex Marginean
- [U-Boot] [PATCH 0/5] FSL/Layerscape gen 3: export serdes cfg to env
Alex Marginean
- [U-Boot] [PATCH 1/5] board: fsl: lx2160a: free up arch_misc_init
Alex Marginean
- [U-Boot] [PATCH 2/5] board: fsl: ls2080a/ls2081a: remove empty arch_misc_init
Alex Marginean
- [U-Boot] [PATCH 3/5] board: fsl: ls1088a: remove empty arch_misc_init
Alex Marginean
- [U-Boot] [PATCH 4/5] board: fsl: ls1028a: free up arch_misc_init
Alex Marginean
- [U-Boot] [PATCH 5/5] arch: armv8: fsl-layerscape: export serdes config to environment
Alex Marginean
- [PATCH v3 0/6] Introduce DSA Ethernet switch class and Felix driver
Alex Marginean
- [PATCH v3 1/6] net: introduce DSA class for Ethernet switches
Alex Marginean
- [PATCH v3 2/6] drivers: net: add a DSA sandbox driver
Alex Marginean
- [PATCH v3 3/6] test: dm: add a simple unit test for DSA class
Alex Marginean
- [PATCH v3 4/6] drivers: net: add Felix DSA switch driver
Alex Marginean
- [PATCH v3 5/6] arm: dts: ls1028a: adds Ethernet switch node and its dependencies
Alex Marginean
- [PATCH v3 6/6] configs: ls1028a: enable the Ethernet switch driver in defconfig
Alex Marginean
- [PATCH v2 0/5] FSL/Layerscape gen 3: export serdes cfg to env
Alex Marginean
- [PATCH v2 1/5] board: fsl: lx2160a: free up arch_misc_init
Alex Marginean
- [PATCH v2 2/5] board: fsl: ls2080a/ls2081a: remove empty arch_misc_init
Alex Marginean
- [PATCH v2 3/5] board: fsl: ls1088a: remove empty arch_misc_init
Alex Marginean
- [PATCH v2 4/5] board: fsl: ls1028a: free up arch_misc_init
Alex Marginean
- [PATCH v2 5/5] arch: armv8: fsl-layerscape: export serdes config to environment
Alex Marginean
- [PATCH 1/2] drivers: net: phy: aquantia: drop XGMII as a valid system interface proto
Alex Marginean
- [PATCH 2/2] drivers: net: phy: aquantia: make it less verbose
Alex Marginean
- [PATCH] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Alex Marginean
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Alex Marginean
- [PATCH] drivers: net: bcm-sf2: pass -1 to phy_connect()
Alex Marginean
- [U-Boot] [PATCH] net: eth-uclass: ignore unavailable devices
Alexandru Marginean
- [U-Boot] [PATCH v2 1/6] net: introduce DSA class for Ethernet switches
Alexandru Marginean
- [U-Boot] [PATCH] drivers: pci: ignore disabled devices
Alexandru Marginean
- [U-Boot] [PATCH] net: eth-uclass: ignore unavailable devices
Alexandru Marginean
- [U-Boot] [PATCH v2 1/6] net: introduce DSA class for Ethernet switches
Alexandru Marginean
- [U-Boot] [PATCH 2/5] board: fsl: ls2080a/ls2081a: remove empty arch_misc_init
Alexandru Marginean
- driving Eth PHYs as udevices
Alexandru Marginean
- [U-Boot] [ANNOUNCEMENT] Expect ML downtime at 2019-12-03 11:00 CET
Alexandru Marginean
- [PATCH] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Alexandru Marginean
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Alexandru Marginean
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Alexandru Marginean
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Alexandru Marginean
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Alexandru Marginean
- [PATCH v3 1/6] net: introduce DSA class for Ethernet switches
Alexandru Marginean
- [PATCH v3 1/6] net: introduce DSA class for Ethernet switches
Alexandru Marginean
- [PATCH v3 4/6] drivers: net: add Felix DSA switch driver
Alexandru Marginean
- [PATCH v3 4/6] drivers: net: add Felix DSA switch driver
Alexandru Marginean
- [PATCH v3 1/6] net: introduce DSA class for Ethernet switches
Alexandru Marginean
- [PATCH] drivers: net: fsl_enetc: use write_hwaddr()
Alexandru Marginean
- [PATCH] dm: uclass: don't assign aliased seq numbers
Alexandru Marginean
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Alexandru Marginean
- [PATCH] dm: uclass: don't assign aliased seq numbers
Alexandru Marginean
- [U-Boot] [RESEND PATCH] net: tftp: Fix tftp store address check in store_block()
Bin Meng
- [U-Boot] [RESEND PATCH v2] dm: serial: Handle "stdout-path" with ":options" correctly
Bin Meng
- [U-Boot] [PATCH v5 081/101] x86: Add a generic Intel GPIO driver
Bin Meng
- [U-Boot] [PATCH v5 082/101] x86: Move qemu CPU fixup function into its own file
Bin Meng
- [U-Boot] [PATCH v5 084/101] x86: apl: Add PMC driver
Bin Meng
- [U-Boot] [PATCH v5 085/101] x86: apl: Add UART driver
Bin Meng
- [U-Boot] [PATCH v5 086/101] x86: apl: Add pinctrl driver
Bin Meng
- [U-Boot] [PATCH v5 087/101] i2c: designware: Add Apollo Lake support
Bin Meng
- [U-Boot] [PATCH v5 088/101] x86: apl: Add systemagent driver
Bin Meng
- [U-Boot] [PATCH v5 089/101] x86: apl: Add hostbridge driver
Bin Meng
- [U-Boot] [PATCH v5 090/101] x86: apl: Add ITSS driver
Bin Meng
- [U-Boot] [PATCH v5 091/101] x86: apl: Add LPC driver
Bin Meng
- [U-Boot] [PATCH v5 092/101] x86: apl: Add PCH driver
Bin Meng
- [U-Boot] [PATCH v5 093/101] x86: apl: Add PUNIT driver
Bin Meng
- [U-Boot] [PATCH v5 094/101] x86: apl: Add SPL loaders
Bin Meng
- [U-Boot] [PATCH v5 095/101] x86: apl: Add a CPU driver
Bin Meng
- [U-Boot] [PATCH v5 096/101] x86: apl: Add SPL/TPL init
Bin Meng
- [U-Boot] [PATCH v5 097/101] x86: apl: Add P2SB driver
Bin Meng
- [U-Boot] [PATCH v5 098/101] x86: apl: Add Kconfig and Makefile
Bin Meng
- [U-Boot] [PATCH v5 099/101] x86: apl: Add FSP structures
Bin Meng
- [U-Boot] [PATCH] drivers: pci: ignore disabled devices
Bin Meng
- [U-Boot] [PATCH v5 100/101] x86: apl: Add FSP support
Bin Meng
- [U-Boot] [PATCH v5 101/101] x86: Add chromebook_coral
Bin Meng
- [PATCH] Makefile: Ensure tools directory exists in output prior to use
Bin Meng
- [PATCH v5 006/101] net: Move the checksum functions to lib/
Bin Meng
- [PATCH v6 001/102] binman: Add a library to access binman entries
Bin Meng
- [PATCH v6 002/102] dm: gpio: Allow control of GPIO uclass in SPL
Bin Meng
- [PATCH v6 003/102] dm: core: Fix offset_to_ofnode() with invalid offset
Bin Meng
- [PATCH v6 004/102] dm: pci: Allow delaying auto-config until after relocation
Bin Meng
- [PATCH v6 005/102] dm: pci: Move pci_get_devfn() into a common file
Bin Meng
- [PATCH v6 006/102] net: Move the checksum functions to lib/
Bin Meng
- [PATCH v6 006/102] net: Move the checksum functions to lib/
Bin Meng
- [PATCH v6 007/102] i2c: designware: Tidy up PCI support
Bin Meng
- [PATCH v6 008/102] i2c: designware: Avoid using static data
Bin Meng
- [PATCH v6 007/102] i2c: designware: Tidy up PCI support
Bin Meng
- [PATCH v6 008/102] i2c: designware: Avoid using static data
Bin Meng
- [PATCH v6 009/102] i2c: designware: Support use in SPL
Bin Meng
- [PATCH v6 010/102] x86: spi: Add helper functions for Intel Fast SPI
Bin Meng
- [PATCH v6 011/102] fdt: Show the preprocessed .dts file on error
Bin Meng
- [PATCH v6 012/102] dm: pinctrl: Allow enabling full pinctrl in SPL/TPL
Bin Meng
- [PATCH v6 013/102] board_r: Move early-timer init later
Bin Meng
- [PATCH v6 012/102] dm: pinctrl: Allow enabling full pinctrl in SPL/TPL
Bin Meng
- [PATCH v6 013/102] board_r: Move early-timer init later
Bin Meng
- [PATCH v6 016/102] x86: timer: use a timer base of 0
Bin Meng
- [PATCH v6 017/102] x86: timer: Reduce timer code size in TPL on Intel CPUs
Bin Meng
- [PATCH v6 018/102] x86: Drop unnecessary cpu code for TPL
Bin Meng
- [PATCH v6 019/102] x86: Drop unnecessary interrupt code for TPL
Bin Meng
- [PATCH v6 020/102] x86: power: Add an ACPI PMC uclass
Bin Meng
- [PATCH v6 021/102] x86: sandbox: Add a PMC emulator and test
Bin Meng
- [PATCH v6 022/102] pci: Add support for p2sb uclass
Bin Meng
- [PATCH v6 023/102] sandbox: Disable mmio by default in tests
Bin Meng
- [PATCH v6 024/102] sandbox: Add PCI driver and test for p2sb
Bin Meng
- [PATCH v6 025/102] x86: Move UCLASS_IRQ into a separate file
Bin Meng
- [PATCH v6 026/102] sandbox: Add a test for IRQ
Bin Meng
- [PATCH v6 027/102] x86: Define the SPL image start
Bin Meng
- [PATCH v6 028/102] x86: Reduce mrccache record alignment size
Bin Meng
- [PATCH v6 029/102] x86: Correct mrccache find_next_mrc_cache() calculation
Bin Meng
- [PATCH v6 030/102] x86: Adjust mrccache_get_region() to use livetree
Bin Meng
- [PATCH v6 031/102] x86: Adjust mrccache_get_region() to support get_mmap()
Bin Meng
- [PATCH v6 032/102] x86: Add a new global_data member for the cache record
Bin Meng
- [PATCH v6 033/102] x86: Tidy up error handling in mrccache_save()
Bin Meng
- [PATCH v6 034/102] x86: Update mrccache to support multiple caches
Bin Meng
- [PATCH v6 035/102] x86: Add mrccache support for a 'variable' cache
Bin Meng
- [PATCH v6 036/102] x86: Don't export mrccache_update()
Bin Meng
- [PATCH v6 037/102] x86: Move fsp_prepare_mrc_cache() to fsp1 directory
Bin Meng
- [PATCH v6 038/102] x86: Set the DRAM banks to reflect real location
Bin Meng
- [PATCH v6 039/102] x86: Set up the MTRR for SDRAM
Bin Meng
- [PATCH v6 040/102] x86: Don't imply libfdt or SPI flash in TPL
Bin Meng
- [PATCH v6 045/102] x86: fsp: Add FSP2 base support
Bin Meng
- [PATCH v6 041/102] x86: Allow removal of standard PCH drivers
Bin Meng
- [PATCH v6 042/102] x86: Allow interrupt to happen once
Bin Meng
- [PATCH v6 043/102] x86: fsp: Make graphics support common to FSP1/2
Bin Meng
- [PATCH v6 044/102] x86: fsp: Correct wrong header inlude in fsp_support.c
Bin Meng
- [PATCH v6 045/102] x86: fsp: Add FSP2 base support
Bin Meng
- [PATCH v6 046/102] x86: fsp: Set up an MTRR for the graphics frame buffer
Bin Meng
- [PATCH v6 047/102] x86: fsp: Add a new arch_fsp_init_r() hook
Bin Meng
- [PATCH v6 048/102] x86: fsp: Allow remembering the location of FSP-S
Bin Meng
- [PATCH v6 049/102] x86: fsp: Make the notify API call common
Bin Meng
- [PATCH v6 050/102] x86: Don't include the BIOS emulator in TPL
Bin Meng
- [PATCH v6 051/102] x86: Add an option to include a FIT
Bin Meng
- [PATCH v6 052/102] x86: Add support for newer CAR schemes
Bin Meng
- [PATCH v6 053/102] x86: Disable microcode section for FSP2
Bin Meng
- [PATCH v6 054/102] x86: Update the fsp command for FSP2
Bin Meng
- [PATCH v6 055/102] x86: Update .dtsi file for FSP2
Bin Meng
- [PATCH v6 056/102] x86: Add an option to control the position of U-Boot
Bin Meng
- [PATCH v6 057/102] x86: Add an option to control the position of SPL
Bin Meng
- [PATCH v6 058/102] x86: Add an fdtmap and image-header
Bin Meng
- [PATCH v6 059/102] x86: Don't repeat microcode in U-Boot if not needed
Bin Meng
- [PATCH v6 060/102] x86: Separate out U-Boot and device tree in ROM image
Bin Meng
- [PATCH v6 061/102] x86: Make MSR_PKG_POWER_SKU common
Bin Meng
- [PATCH v6 062/102] spi: Correct operations check in dm_spi_xfer()
Bin Meng
- [PATCH v6 063/102] x86: spi: Don't enable SPI_FLASH_BAR by default
Bin Meng
- [PATCH v6 064/102] spi: ich: Move init function just above probe()
Bin Meng
- [PATCH v6 065/102] spi: ich: Move the protection/lockdown code into a function
Bin Meng
- [PATCH v6 066/102] spi: ich: Convert to livetree
Bin Meng
- [PATCH v6 067/102] spi: ich: Fix header order
Bin Meng
- [PATCH v6 068/102] spi: ich: Various small tidy-ups
Bin Meng
- [PATCH v6 069/102] spi: ich: Add mmio_base to struct ich_spi_platdata
Bin Meng
- [PATCH v6 070/102] dm: doc: Add a note about of-platdata and header files
Bin Meng
- [PATCH v6 071/102] spi: ich: Correct max-size bug in ich_spi_adjust_size()
Bin Meng
- [PATCH v6 075/102] spi: ich: Add TPL support
Bin Meng
- [PATCH v6 078/102] x86: Enable pinctrl in SPL and TPL
Bin Meng
- [PATCH v6 079/102] x86: Add low-power subsystem (lpss) support
Bin Meng
- [PATCH v6 071/102] spi: ich: Correct max-size bug in ich_spi_adjust_size()
Bin Meng
- [PATCH v6 072/102] spi: ich: Support of-platdata for fast-spi
Bin Meng
- [PATCH v6 073/102] spi: ich: Support hardware sequencing
Bin Meng
- [PATCH v6 074/102] spi: ich: Add support for get_mmap() method
Bin Meng
- [PATCH v6 075/102] spi: ich: Add TPL support
Bin Meng
- [PATCH v6 076/102] spi: ich: Add Apollo Lake support
Bin Meng
- [PATCH v6 077/102] mtd: spi: Export spi_flash_std_probe()
Bin Meng
- [PATCH v6 078/102] x86: Enable pinctrl in SPL and TPL
Bin Meng
- [PATCH v6 079/102] x86: Add low-power subsystem (lpss) support
Bin Meng
- [PATCH v6 080/102] x86: Add a generic Intel pinctrl driver
Bin Meng
- [PATCH v6 081/102] x86: Add a generic Intel GPIO driver
Bin Meng
- [PATCH v6 082/102] x86: Move qemu CPU fixup function into its own file
Bin Meng
- [PATCH v6 084/102] x86: apl: Add PMC driver
Bin Meng
- [PATCH v6 085/102] x86: apl: Add UART driver
Bin Meng
- [PATCH v6 086/102] x86: apl: Add pinctrl driver
Bin Meng
- [PATCH v6 088/102] x86: apl: Add systemagent driver
Bin Meng
- [PATCH v6 089/102] x86: apl: Add hostbridge driver
Bin Meng
- [PATCH v6 080/102] x86: Add a generic Intel pinctrl driver
Bin Meng
- [PATCH v6 081/102] x86: Add a generic Intel GPIO driver
Bin Meng
- [PATCH v6 082/102] x86: Move qemu CPU fixup function into its own file
Bin Meng
- [PATCH v6 083/102] x86: apl: Add basic IO addresses
Bin Meng
- [PATCH v6 084/102] x86: apl: Add PMC driver
Bin Meng
- [PATCH v6 085/102] x86: apl: Add UART driver
Bin Meng
- [PATCH v6 091/102] x86: apl: Add LPC driver
Bin Meng
- [PATCH v6 093/102] x86: apl: Add PUNIT driver
Bin Meng
- [PATCH v6 094/102] spl: Add methods to find the position/size of next phase
Bin Meng
- [PATCH v6 095/102] x86: apl: Add SPL loaders
Bin Meng
- [PATCH v6 096/102] x86: apl: Add a CPU driver
Bin Meng
- [PATCH v6 097/102] x86: apl: Add SPL/TPL init
Bin Meng
- [PATCH v6 098/102] x86: apl: Add P2SB driver
Bin Meng
- [PATCH v6 099/102] x86: apl: Add Kconfig and Makefile
Bin Meng
- [PATCH v6 100/102] x86: apl: Add FSP structures
Bin Meng
- [PATCH v6 101/102] x86: apl: Add FSP support
Bin Meng
- [PATCH v6 102/102] x86: Add chromebook_coral
Bin Meng
- [PATCH v6 000/102] x86: Add initial support for apollolake
Bin Meng
- [PATCH] x86: simplify ljmp to 32-bit code
Bin Meng
- [PATCH] x86: use data32 directive instead of macro for operand-size prefix
Bin Meng
- [PATCH] x86: simplify ljmp to 32-bit code
Bin Meng
- [PATCH] x86: use data32 directive instead of macro for operand-size prefix
Bin Meng
- [PATCH 1/4] serial: n16550: Support run-time configuration
Bin Meng
- [PATCH 2/4] x86: Update coreboot serial table struct
Bin Meng
- [PATCH 3/4] x86: serial: Add a coreboot serial driver
Bin Meng
- [PATCH 4/4] x86: Move coreboot over to use the coreboot UART
Bin Meng
- Please pull u-boot-x86
Bin Meng
- [PATCH v7 01/17] x86: apl: Add pinctrl driver
Bin Meng
- [PATCH v7 02/17] i2c: designware: Add Apollo Lake support
Bin Meng
- [PATCH v7 03/17] x86: apl: Add systemagent driver
Bin Meng
- [PATCH v7 13/17] x86: apl: Add P2SB driver
Bin Meng
- [PATCH v2 1/4] serial: ns16550: Support run-time configuration
Bin Meng
- [PATCH v8 02/17] i2c: designware: Add Apollo Lake support
Bin Meng
- [PATCH v7 01/17] x86: apl: Add pinctrl driver
Bin Meng
- [PATCH v8 02/17] i2c: designware: Add Apollo Lake support
Bin Meng
- [PATCH v7 03/17] x86: apl: Add systemagent driver
Bin Meng
- [PATCH v7 04/17] x86: apl: Add hostbridge driver
Bin Meng
- [PATCH v7 05/17] x86: apl: Add ITSS driver
Bin Meng
- [PATCH v7 06/17] x86: apl: Add LPC driver
Bin Meng
- [PATCH v7 07/17] x86: apl: Add PCH driver
Bin Meng
- [PATCH v7 08/17] x86: apl: Add PUNIT driver
Bin Meng
- [PATCH v7 09/17] spl: Add methods to find the position/size of next phase
Bin Meng
- [PATCH v7 10/17] x86: apl: Add SPL loaders
Bin Meng
- [PATCH v7 11/17] x86: apl: Add a CPU driver
Bin Meng
- [PATCH v7 12/17] x86: apl: Add SPL/TPL init
Bin Meng
- [PATCH v7 13/17] x86: apl: Add P2SB driver
Bin Meng
- [PATCH v7 14/17] x86: apl: Add Kconfig and Makefile
Bin Meng
- [PATCH v7 15/17] x86: apl: Add FSP structures
Bin Meng
- [PATCH v7 16/17] x86: apl: Add FSP support
Bin Meng
- [PATCH v7 17/17] x86: Add chromebook_coral
Bin Meng
- Please pull u-boot-x86/next to next branch
Bin Meng
- [PATCH v1] T1024RDB: USB: Add a 10808 us delay in usb_scan_port
Bin Meng
- [PATCH v2 1/4] serial: ns16550: Support run-time configuration
Bin Meng
- [BUG] POWER: undefined reference to `_restgpr_25_x'
Bin Meng
- Please pull u-boot-x86/next to next branch
Bin Meng
- [PATCH] riscv: Fix breakage caused by linker relaxation
Bin Meng
- [PATCH 1/1] virtio: fix typo devicd
Bin Meng
- [PATCH] tools: .gitignore: add asn1_compiler
Bin Meng
- [PATCH] doc: fix opensbi build steps for AX25-AE350
Bin Meng
- [PATCH] qemu: arm: Scan the pci bus in board_init
Bin Meng
- [PATCH] qemu: arm: Scan the pci bus in board_init
Bin Meng
- arm: imx6: configure NoC on i.MX6DQP
Bernhard Messerklinger
- [U-Boot] Maximum size of u-boot.imx for TBS2910 board
Soeren Moch
- [U-Boot] Maximum size of u-boot.imx for TBS2910 board
Soeren Moch
- [PATCH] imx: dts: tbs2910: add u-boot dtsi to shrink image size
Soeren Moch
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Soeren Moch
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Soeren Moch
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Soeren Moch
- [U-Boot] [PATCH] Add -pthread to HOSTLOADLIBES_mkimage
Benedikt-Alexander Mokroß
- [PATCH 3/5] clk: meson: reset mmc clock on probe
Anand Moon
- [U-Boot] [PATCH 1/4] mmc: meson-gx: Fix tx phase in the tuning process
Anand Moon
- [U-Boot] [PATCH 1/4] mmc: meson-gx: Fix tx phase in the tuning process
Anand Moon
- [U-Boot] [PATCH 1/4] mmc: meson-gx: Fix tx phase in the tuning process
Anand Moon
- [U-Boot] [PATCHv2 0/3] Odroid n2 using eMMC would fail to boot up
Anand Moon
- [U-Boot] [PATCHv2 1/3] mmc: meson-gx: Fix clk phase tuning for MMC
Anand Moon
- [U-Boot] [PATCHv2 2/3] configs: meson64: enable GIC support for G12A/G12B
Anand Moon
- [U-Boot] [PATCHv2 3/3] board: amlogic: select PWRSEQ for all amlogic platform
Anand Moon
- [U-Boot] [PATCHv2 1/3] mmc: meson-gx: Fix clk phase tuning for MMC
Anand Moon
- [PATCHv3 0/3] Odroid n2 using eMMC would fail to boot up
Anand Moon
- [PATCHv3 1/3] mmc: meson-gx: Fix clk phase tuning for MMC
Anand Moon
- [PATCHv3 2/3] configs: meson64: enable GIC support for G12A/G12B
Anand Moon
- [PATCHv3 3/3] board: amlogic: select PWRSEQ for all amlogic platform
Anand Moon
- [U-Boot] [PATCH] imx: sync with kernel device tree for Phycore SoM
Parthiban Nallathambi
- mips: SoC or board specific override of flush_dcache_range()
Alex Nemirovsky
- MIPS: override of get_tbclk()
Alex Nemirovsky
- mips: SoC or board specific override of flush_dcache_range()
Alex Nemirovsky
- [PATCH v1 0/1] MIPS: allow override of flush_dcache_range()
Alex Nemirovsky
- [PATCH v1] MIPS: allow override of flush_dcache_range()
Alex Nemirovsky
- [PATCH v1 0/1] MIPS: allow override of get_tbclk()
Alex Nemirovsky
- [PATCH v1] MIPS: allow override of get_tbclk()
Alex Nemirovsky
- Formal upstream support of Cortina Access ARM Based SoCs
Alex Nemirovsky
- OMAP L138 LCDK - giving up maintainership
Sekhar Nori
- OMAP L138 LCDK - giving up maintainership
Sekhar Nori
- [U-Boot] [RFC] cmd: add bootslot command to select/boot slot based on boot counts
Sean Nyekjaer
- [PATCH] env: sf: Don't call spi_flash_free when CONFIG_DM_SPI_FLASH=y
Bryan O'Donoghue
- [PATCH 1/1] arm: -march=armv5t for ARM11
Joris Offouga
- [PATCH 1/3] mx7dsabre: Remove warning about DM_SPI_FLASH
Joris Offouga
- [PATCH] pico-imx7d: Convert to DM_ETH
Joris Offouga
- [PATCH 2/3] mx7dsabre: Enable DM_ETH
Joris Offouga
- [PATCH 3/3] mx7dsabre: Convert to distroboot support
Joris Offouga
- [PATCH 1/1] arch: arm: Program GIC LPI configuration table
Vladimir Olovyannikov
- [PATCH 1/1] drivers: net: add Broadcom bnxt driver for supported platforms
Vladimir Olovyannikov
- [PATCH 1/1] arch: arm: Program GIC LPI configuration table
Vladimir Olovyannikov
- [PATCH v2 1/1] arch: arm: Program GIC LPI configuration table
Vladimir Olovyannikov
- [PATCH] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Vladimir Oltean
- [PATCH] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Vladimir Oltean
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Vladimir Oltean
- [PATCH v3 1/6] net: introduce DSA class for Ethernet switches
Vladimir Oltean
- [PATCH v3 4/6] drivers: net: add Felix DSA switch driver
Vladimir Oltean
- [PATCH v3 4/6] drivers: net: add Felix DSA switch driver
Vladimir Oltean
- [PATCH v3 1/6] net: introduce DSA class for Ethernet switches
Vladimir Oltean
- [PATCH v3 4/6] drivers: net: add Felix DSA switch driver
Vladimir Oltean
- [PATCH 0/3] DM DSA driver for NXP SJA1105 Ethernet switch
Vladimir Oltean
- [PATCH 1/3] lib: import packing API from Linux
Vladimir Oltean
- [PATCH 2/3] include: import if_vlan.h from Linux
Vladimir Oltean
- [PATCH 3/3] net: add driver for NXP SJA1105 DSA L2 switch
Vladimir Oltean
- [PATCH v3 1/6] net: introduce DSA class for Ethernet switches
Vladimir Oltean
- [PATCH v3 1/6] net: introduce DSA class for Ethernet switches
Vladimir Oltean
- [PATCH] dm: uclass: don't assign aliased seq numbers
Vladimir Oltean
- [v5 8/8] dm: arm: ls1021a: add i2c DM support
Vladimir Oltean
- [U-Boot] [PATCH v3 2/2] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes
Igor Opaniuk
- [PATCH v2 0/2] android: colibri_imx7: reserve DDR memory for Cortex-M4
Igor Opaniuk
- [PATCH v2 1/2] common: fdt_support: add support for setting usable memory
Igor Opaniuk
- [PATCH v2 2/2] board: colibri_imx7: reserve DDR memory for Cortex-M4
Igor Opaniuk
- [PATCH v2 1/2] common: fdt_support: add support for setting usable memory
Igor Opaniuk
- [U-Boot] [PATCH v1 1/2] common: fdt_support: add support for setting usable memory
Igor Opaniuk
- [PATCH v1 0/5] toradex: imx: add update_uboot wrapper
Igor Opaniuk
- [PATCH v1 1/5] colibri_imx7: add update_uboot wrapper
Igor Opaniuk
- [PATCH v1 2/5] apalis_imx6: add update_uboot wrapper
Igor Opaniuk
- [PATCH v1 3/5] colibri_imx6: add update_uboot wrapper
Igor Opaniuk
- [PATCH v1 4/5] colibri-imx6ull: add update_uboot wrapper
Igor Opaniuk
- [PATCH v1 5/5] colibri_vf: add update_uboot wrapper
Igor Opaniuk
- [PATCH v1 3/5] colibri_imx6: add update_uboot wrapper
Igor Opaniuk
- [PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion
Igor Opaniuk
- [RESEND PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion
Igor Opaniuk
- [RESEND PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion
Igor Opaniuk
- [PATCH v2 0/5] toradex: imx: add update_uboot wrapper
Igor Opaniuk
- [PATCH v2 1/5] colibri_imx7: add update_uboot wrapper
Igor Opaniuk
- [PATCH v2 2/5] apalis_imx6: add update_uboot wrapper
Igor Opaniuk
- [PATCH v2 3/5] colibri_imx6: add update_uboot wrapper
Igor Opaniuk
- [PATCH v2 4/5] colibri-imx6ull: add update_uboot wrapper
Igor Opaniuk
- [PATCH v2 5/5] colibri_vf: add update_uboot wrapper
Igor Opaniuk
- [PATCH v2 0/4] toradex: tegra: add update_uboot wrapper
Igor Opaniuk
- [PATCH v2 1/4] apalis-tk1: add update_uboot wrapper
Igor Opaniuk
- [PATCH v2 2/4] apalis_t30: add update_uboot wrapper
Igor Opaniuk
- [PATCH v2 3/4] colibri_t20: add update_uboot wrapper
Igor Opaniuk
- [PATCH v2 4/4] colibri_t30: add update_uboot wrapper
Igor Opaniuk
- [PATCH v1] mach-imx: nandbcb: improve cmd help
Igor Opaniuk
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Igor Opaniuk
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Igor Opaniuk
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Igor Opaniuk
- [U-Boot] [PATCH V3 2/2] core: device: use dev_power_domain_on
Igor Opaniuk
- [PATCH v1] Revert "core: device: use dev_power_domain_on"
Igor Opaniuk
- [PATCH v1] mailmap: Update mail address for Igor Opaniuk
Igor Opaniuk
- [PATCH v1] colibri_imx7: disable HAB and CAAM support
Igor Opaniuk
- IMX Serial Downloader mode detection
Igor Opaniuk
- [PATCH v1] Revert "core: device: use dev_power_domain_on"
Igor Opaniuk
- [PATCH 1/2] pfuze: Fix the pmic_get() parameter in the DM case
Igor Opaniuk
- [PATCH v1] colibri_imx7: disable HAB and CAAM support
Igor Opaniuk
- [PATCH v3] mach-imx: bootaux: elf firmware support
Igor Opaniuk
- [PATCH v2 3/3] mach-imx: bootaux: elf firmware support
Igor Opaniuk
- [PATCH] ARC: enable unit tests on development platforms
Eugeniy Paltsev
- [PATCH 1/4] serial: n16550: Support run-time configuration
Park, Aiden
- [PATCH v2 1/4] serial: ns16550: Support run-time configuration
Park, Aiden
- [PATCH 0/2] x86: serial: Use NS16550_DYNAMIC in Slim Bootloader
Park, Aiden
- [PATCH 1/2] x86: serial: Use NS16550_DYNAMIC in Slim Bootloader
Park, Aiden
- [PATCH 2/2] doc: intel: Update serial driver changes in slimbootloader.rst
Park, Aiden
- [PATCH v3 1/4] serial: ns16550: Support run-time configuration
Park, Aiden
- [PATCH 1/4] spl: opensbi: specify main hart as preferred boot hart
Anup Patel
- [PATCH 3/4] riscv: add option to wait for ack from secondary harts in smp functions
Anup Patel
- [PATCH 4/4] spl: opensbi: wait for ack from secondary harts before entering OpenSBI
Anup Patel
- [PATCH 0/3] RISC-V SiFive FU540 support SPL
Pragnesh Patel
- [PATCH 1/3] riscv: Add place-holder for FU540 clk and gpio
Pragnesh Patel
- [PATCH 2/3] riscv: Add FU540 specific includes
Pragnesh Patel
- [PATCH 3/3] riscv: sifive: fu540: add SPL configuration
Pragnesh Patel
- Query: Error: Unable to find signature node in Verified boot
Dhananjay Phadke
- [U-Boot] [PATCH v2 1/8] image: android: Add functions for handling dtb field
Sam Protsenko
- [U-Boot] [PATCH v2 7/8] env: ti: boot: Boot Android with dynamic partitions
Sam Protsenko
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Sam Protsenko
- [U-Boot] [PATCH v4 2/2] cmd: Add dtimg command
Sam Protsenko
- [U-Boot] [PATCH v2 1/8] image: android: Add functions for handling dtb field
Sam Protsenko
- [PATCH 1/4] cmd: dtimg: Report invalid index argument
Sam Protsenko
- [PATCH 2/4] cmd: dtimg: Merge duplicated prints
Sam Protsenko
- [PATCH 3/4] cmd: dtimg: Make <varname> an optional argument
Sam Protsenko
- [PATCH 4/4] cmd: dtimg: Get start and size based on --id and --rev
Sam Protsenko
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Sam Protsenko
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Sam Protsenko
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Sam Protsenko
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Sam Protsenko
- [PATCH 0/3] cmd: dtimg: Rename to adtimg and refactor usage style
Sam Protsenko
- [PATCH v3 0/9] am57xx: Implement Android 10 boot flow
Sam Protsenko
- [PATCH v3 1/9] image: android: Add functions for handling dtb field
Sam Protsenko
- [PATCH v3 2/9] image: android: Add routine to get dtbo params
Sam Protsenko
- [PATCH v3 3/9] cmd: abootimg: Add abootimg command
Sam Protsenko
- [PATCH v3 4/9] doc: android: Add documentation for Android Boot Image
Sam Protsenko
- [PATCH v3 5/9] test/py: android: Add test for abootimg
Sam Protsenko
- [PATCH v3 6/9] configs: am57xx_evm: Enable Android commands
Sam Protsenko
- [PATCH v3 7/9] env: ti: boot: Respect slot_suffix in AVB commands
Sam Protsenko
- [PATCH v3 8/9] env: ti: boot: Boot Android with dynamic partitions
Sam Protsenko
- [PATCH v3 9/9] arm: ti: boot: Use correct dtb and dtbo on Android boot
Sam Protsenko
- [U-Boot-Board-Maintainers] Raspberry pi 4 - u-boot - genet / scb
Andre Przywara
- [U-Boot-Board-Maintainers] Raspberry pi 4 - u-boot - genet / scb
Andre Przywara
- [RFC PATCH 2/2] net: Add Support for GENET Ethernet controller
Andre Przywara
- [RFC PATCH 2/2] net: Add Support for GENET Ethernet controller
Andre Przywara
- [RFC PATCH 2/2] net: Add Support for GENET Ethernet controller
Andre Przywara
- [PATCH 0/3] Ethernet support for Raspberry Pi 4
Andre Przywara
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Andre Przywara
- [PATCH 2/3] rpi4: Update memory map to accommodate scb devices
Andre Przywara
- [PATCH 3/3] rpi4: Enable GENET Ethernet controller
Andre Przywara
- [RFC PATCH] Revert "arm: Show cache warnings in U-Boot proper only"
Andre Przywara
- [RFC PATCH] Revert "arm: Show cache warnings in U-Boot proper only"
Andre Przywara
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Andre Przywara
- [RFC PATCH] Revert "arm: Show cache warnings in U-Boot proper only"
Andre Przywara
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Andre Przywara
- Sunxi (pine64-lts) SPL load BL32
Andre Przywara
- [PATCH] doc: net: Rewrite network driver documentation
Andre Przywara
- [RFC PATCH] Revert "arm: Show cache warnings in U-Boot proper only"
André Przywara
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
André Przywara
- [RFC PATCH 1/1] doc: net: Rewrite network driver documentation
André Przywara
- [RFC PATCH 1/1] doc: net: Rewrite network driver documentation
André Przywara
- [U-Boot] [PATCH RESEND v2 00/10] dma: ti: k3-udma: Add support for J721e
Vignesh Raghavendra
- [U-Boot] [PATCH RESEND v2 01/10] lib: Import few bitmap functions from Linux
Vignesh Raghavendra
- [U-Boot] [PATCH RESEND v2 02/10] dma: ti: k3-udma: Query DMA channels allocated from Resource Manager
Vignesh Raghavendra
- [U-Boot] [PATCH RESEND v2 03/10] soc: ti: k3-navss-ringacc: Flush/invalidate caches on ring push/pop
Vignesh Raghavendra
- [U-Boot] [PATCH RESEND v2 04/10] soc: ti: k3-navss-ringacc: Get SYSFW reference from DT phandle
Vignesh Raghavendra
- [U-Boot] [PATCH RESEND v2 05/10] dma: ti: k3-udma: Remove coherency check for cache ops
Vignesh Raghavendra
- [U-Boot] [PATCH RESEND v2 06/10] dma: ti: k3-udma: Fix debug prints during enabling MEM_TO_DEV transfers
Vignesh Raghavendra
- [U-Boot] [PATCH RESEND v2 07/10] dma: ti: k3-udma: Switch to exposed ring mode
Vignesh Raghavendra
- [U-Boot] [PATCH RESEND v2 08/10] dma: ti: k3-udma: Fix ring push operation for 32 bit cores
Vignesh Raghavendra
- [U-Boot] [PATCH RESEND v2 09/10] dma: ti: k3-udma: Fix build warnings when building for 32 bit platforms
Vignesh Raghavendra
- [U-Boot] [PATCH RESEND v2 10/10] dma: ti: k3-udma: Add new compatible to J721e
Vignesh Raghavendra
- [U-Boot] [PATCH v2 0/6] J721e: Add networking support
Vignesh Raghavendra
- [U-Boot] [PATCH v2 1/6] dma: Introduce dma_get_cfg() interface
Vignesh Raghavendra
- [U-Boot] [PATCH v2 2/6] dma: ti: k3-udma: Implement dma_get_cfg() interface
Vignesh Raghavendra
- [U-Boot] [PATCH v2 3/6] net: ti: am65-cpsw-nuss: Rework RX flow ID handling
Vignesh Raghavendra
- [U-Boot] [PATCH v2 4/6] net: ti: am65-cpsw-nuss: Add new compatible for J721e
Vignesh Raghavendra
- [U-Boot] [PATCH v2 5/6] arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes
Vignesh Raghavendra
- [U-Boot] [PATCH v2 6/6] configs: j721e_evm_a72_defconfig: Enable DMA and Ethernet
Vignesh Raghavendra
- [RFC PATCH] spi: spi-nor: Add dual flash support in spi-nor framework
Vignesh Raghavendra
- [PATCH v3 00/10] dma: ti: k3-udma: Add support for J721e
Vignesh Raghavendra
- [PATCH v3 01/10] lib: Import few bitmap functions from Linux
Vignesh Raghavendra
- [PATCH v3 02/10] dma: ti: k3-udma: Query DMA channels allocated from Resource Manager
Vignesh Raghavendra
- [PATCH v3 03/10] soc: ti: k3-navss-ringacc: Flush/invalidate caches on ring push/pop
Vignesh Raghavendra
- [PATCH v3 04/10] soc: ti: k3-navss-ringacc: Get SYSFW reference from DT phandle
Vignesh Raghavendra
- [PATCH v3 05/10] dma: ti: k3-udma: Remove coherency check for cache ops
Vignesh Raghavendra
- [PATCH v3 06/10] dma: ti: k3-udma: Fix debug prints during enabling MEM_TO_DEV transfers
Vignesh Raghavendra
- [PATCH v3 07/10] dma: ti: k3-udma: Switch to exposed ring mode
Vignesh Raghavendra
- [PATCH v3 08/10] dma: ti: k3-udma: Fix ring push operation for 32 bit cores
Vignesh Raghavendra
- [PATCH v3 09/10] dma: ti: k3-udma: Fix build warnings when building for 32 bit platforms
Vignesh Raghavendra
- [PATCH v3 10/10] dma: ti: k3-udma: Add new compatible to J721e
Vignesh Raghavendra
- [PATCH v3 0/6] J721e: Add networking support
Vignesh Raghavendra
- [PATCH v3 1/6] dma: Introduce dma_get_cfg() interface
Vignesh Raghavendra
- [PATCH v3 2/6] dma: ti: k3-udma: Implement dma_get_cfg() interface
Vignesh Raghavendra
- [PATCH v3 3/6] net: ti: am65-cpsw-nuss: Rework RX flow ID handling
Vignesh Raghavendra
- [PATCH v3 4/6] net: ti: am65-cpsw-nuss: Add new compatible for J721e
Vignesh Raghavendra
- [PATCH v3 5/6] arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes
Vignesh Raghavendra
- [PATCH v3 6/6] configs: j721e_evm_a72_defconfig: Enable DMA and Ethernet
Vignesh Raghavendra
- [PATCH] usb: cdns3: ep0: Fix build warnings related to cache ops
Vignesh Raghavendra
- [PATCH 0/3] spi-nor: Add octal mode support
Vignesh Raghavendra
- [PATCH 1/3] mtd: spi-nor-core: Add octal mode support
Vignesh Raghavendra
- [PATCH 2/3] spi: cadence-qspi: Add support for Cadence Octal SPI controller
Vignesh Raghavendra
- [PATCH 3/3] spi: cadence-qspi: Add compatible for TI AM654
Vignesh Raghavendra
- [PATCH v4 00/10] dma: ti: k3-udma: Add support for J721e
Vignesh Raghavendra
- [PATCH v4 01/10] lib: Import few bitmap functions from Linux
Vignesh Raghavendra
- [PATCH v4 02/10] dma: ti: k3-udma: Query DMA channels allocated from Resource Manager
Vignesh Raghavendra
- [PATCH v4 03/10] soc: ti: k3-navss-ringacc: Flush/invalidate caches on ring push/pop
Vignesh Raghavendra
- [PATCH v4 04/10] soc: ti: k3-navss-ringacc: Get SYSFW reference from DT phandle
Vignesh Raghavendra
- [PATCH v4 05/10] dma: ti: k3-udma: Remove coherency check for cache ops
Vignesh Raghavendra
- [PATCH v4 06/10] dma: ti: k3-udma: Fix debug prints during enabling MEM_TO_DEV transfers
Vignesh Raghavendra
- [PATCH v4 07/10] dma: ti: k3-udma: Switch to exposed ring mode
Vignesh Raghavendra
- [PATCH v4 08/10] dma: ti: k3-udma: Fix ring push operation for 32 bit cores
Vignesh Raghavendra
- [PATCH v4 09/10] dma: ti: k3-udma: Fix build warnings when building for 32 bit platforms
Vignesh Raghavendra
- [PATCH v4 10/10] dma: ti: k3-udma: Add new compatible to J721e
Vignesh Raghavendra
- [PATCH v2 0/8] AM654: Add USB support
Vignesh Raghavendra
- [PATCH v2 1/8] dwc3-generic: Add support for AM654 USB controller
Vignesh Raghavendra
- [PATCH v2 2/8] phy: omap-usb2-phy: Fix warnings when built for ARM64
Vignesh Raghavendra
- [PATCH v2 3/8] phy: omap-usb2-phy: Add support for AM654 USB2 PHY
Vignesh Raghavendra
- [PATCH v2 4/8] arm: dts: k3-am65-main: add USB support
Vignesh Raghavendra
- [PATCH v2 5/8] arm: dts: k3-am654-base-board: enable USB1
Vignesh Raghavendra
- [PATCH v2 6/8] configs: am65x_evm: Add DFU related env variables
Vignesh Raghavendra
- [PATCH v2 7/8] am65x_evm_a53_defconfig: Enable configs to support USB and DFU
Vignesh Raghavendra
- [PATCH v2 8/8] configs: am65x_evm: Enable USB keyboard as second stdin
Vignesh Raghavendra
- [PATCH] spi: ti_qspi: Add support for CS other than CS0
Vignesh Raghavendra
- [PATCH] mtd: spi-nor: ids: Add GigaDevice gd25q128
Vignesh Raghavendra
- [PATCH] tools/imximage: share DCD information via Kconfig
Jorge Ramirez-Ortiz
- [PATCH] rockchip: px30: Change RK809 PMIC interrupt polarity
Miquel Raynal
- [U-Boot] [PATCH] iminfo: add missing map_sysmem
Philippe Reynes
- [U-Boot] [PATCH] cmd: cp: add missing map_sysmem
Philippe Reynes
- [PATCH] cmd_ut: add a parameter prefix to the function cmd_ut_category
Philippe Reynes
- [PATCH 1/2] mkimage: fit: add support to encrypt image with aes
Philippe Reynes
- [PATCH 2/2] u-boot: fit: add support to decrypt fit with aes
Philippe Reynes
- [U-Boot] pull request u-boot-mpc85xx
Tom Rini
- [U-Boot] [PULL] Pull request: u-boot-stm32 u-boot-stm32-20191126
Tom Rini
- [U-Boot] Please pull mmc-11-27-2019
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PATCH] arm: dts: bcm283x: Allow UARTs to work before relocation
Tom Rini
- [U-Boot] [PATCHv2] blk: Make use of CONFIG_HAVE_BLOCK_DEVICE more
Tom Rini
- [U-Boot] [PATCH v2] spl: Allow cache drivers to be used in SPL
Tom Rini
- [U-Boot] [PATCH v4 1/2] disk: update to use SPL_PARTITIONS for SPL
Tom Rini
- [U-Boot] [PATCH v2] warp7: Fix U-Boot corruption after saving the environment
Tom Rini
- [U-Boot] [PULL] u-boot-mips
Tom Rini
- [U-Boot] pull request u-boot-fsl-qoriq
Tom Rini
- [U-Boot] [PATCH v4 00/42] common: Further reduce common.h
Tom Rini
- [U-Boot] [PATCH v3] warp7: Fix U-Boot corruption after saving the environment
Tom Rini
- [U-Boot] [ANN] U-Boot v2020.01-rc4 released
Tom Rini
- [PATCH v3] warp7: Fix U-Boot corruption after saving the environment
Tom Rini
- [PATCH] arm: imx: Default to SYS_THUMB_BUILD for i.MX6/7
Tom Rini
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Tom Rini
- [PATCH] arm: imx: Default to SYS_THUMB_BUILD for i.MX6/7
Tom Rini
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Tom Rini
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Tom Rini
- [PATCH v3] warp7: Fix U-Boot corruption after saving the environment
Tom Rini
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Tom Rini
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Tom Rini
- [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Tom Rini
- [U-Boot] [PATCH v3 1/5] ARM: MediaTek: Add support for MediaTek MT8518 SoC
Tom Rini
- [U-Boot] [PATCH v3 2/5] clk: mediatek: add driver for MT8518
Tom Rini
- [U-Boot] [PATCH v3 3/5] mmc: mtk-sd: Adjust the mmc tuning flow
Tom Rini
- [U-Boot] [PATCH v3 4/5] pinctrl: add driver for MT8518
Tom Rini
- [U-Boot] [PATCH v3 5/5] ARM: MediaTek: add basic support for MT8518 boards
Tom Rini
- [U-Boot] [PATCH 1/3] ARM: omapl138_lcdk: Separate BSS in SPL
Tom Rini
- [U-Boot] [PATCH 2/3] ARM: omapl138_lcdk: Increase malloc pool before relocation
Tom Rini
- [U-Boot] [PATCH 3/3] ARM: omapl138_lcdk: Enable SPL_DM_SEQ_ALIAS and SPL_OF_TRANSLATE
Tom Rini
- [U-Boot] [PATCH] ARM: omapl138_lcdk: Allow early init to start instruction cache
Tom Rini
- [U-Boot] [PATCH 1/3] Kconfig: disambiguate config names for tiny printf
Tom Rini
- [U-Boot] [PATCH 3/3] Kconfig: make TPL_DM_SERIAL depend on TPL_DM
Tom Rini
- [U-Boot] [PATCH 1/3] Makefile: don't try to construct CLEAN_FILES based on config
Tom Rini
- [U-Boot] [PATCH 2/3] Makefile: consolidate hardcoded lists of files to clean
Tom Rini
- [U-Boot] [PATCH 3/3] Makefile: add Rockchip idbloader.img to CLEAN_FILES
Tom Rini
- [U-Boot] [PATCH] net: cpsw: Add NULL pointer check
Tom Rini
- [U-Boot] [PATCH] regmap: Fix potential memory leaks
Tom Rini
- [U-Boot] [PATCH v2] cosmetic: Fix spelling and whitespace errors
Tom Rini
- [U-Boot] [PATCH] spl: ymodem: Fix loading of fit image
Tom Rini
- [U-Boot] [PATCH 1/4] mmc: davinci: drop support for ti, dm6441-mmc
Tom Rini
- [U-Boot] [PATCH 2/4] mmc: davinci: drop struct davinci_mmc_plat
Tom Rini
- [U-Boot] [PATCH 3/4] board: omapl138_lcdk: add the mmc device to SPL
Tom Rini
- [U-Boot] [PATCH 4/4] mmc: davinci: fix mmc boot in SPL
Tom Rini
- [U-Boot] [PATCH] bootm: vxworks: Support Linux compatible standard DTB for ARM and PPC
Tom Rini
- [U-Boot] [PATCH v1 1/1] cmd: pxe: Fix bootm argument count
Tom Rini
- [U-Boot] [PATCH v2] armv7m: cache: add invalidate_icache_all() stub
Tom Rini
- [U-Boot] [PATCH 1/2] Convert CONFIG_PHY_CORTINA to Kconfig
Tom Rini
- [U-Boot] [PATCH 2/2] Convert CONFIG_SYS_CORTINA_FW_IN_MMC et al to Kconfig
Tom Rini
- [U-Boot] [PATCH 1/2] pci: Only link pci_rom.o in some cases
Tom Rini
- [U-Boot] [PATCH 2/2] mtd: mtdcore: Drop unused mtd_table
Tom Rini
- [U-Boot] [PATCH] tbs2910: Disable VxWorks image booting support
Tom Rini
- [U-Boot] [PATCH v1] MAINTAINERS: Add info for bcm283x
Tom Rini
- [U-Boot] [PATCHv2] blk: Make use of CONFIG_HAVE_BLOCK_DEVICE more
Tom Rini
- Please pull u-boot-dm
Tom Rini
- Pull request for UEFI sub-system for efi-2020-01-rc5
Tom Rini
- [PATCH] RFE: tools: fix parallel build of tools-all
Tom Rini
- [PATCH] RFE: tools: fix parallel build of tools-all
Tom Rini
- [U-Boot] [PATCH] arm64: zynqmp: Point zcu216 defconfig to correct dts file
Tom Rini
- [U-Boot] amlogic a96 mini
Tom Rini
- [U-Boot] Sharing a hardware lab
Tom Rini
- What is the difference between ARCH_XXX MACH_XXX TARGET_XXX macros
Tom Rini
- [PATCH] Makefile: Ensure tools directory exists in output prior to use
Tom Rini
- [PATCH v2 00/16] efi_loader: add secure boot support
Tom Rini
- [U-Boot] [PATCH v5 00/26]MTD defconfigs/Kconfigs/Makefiles heavy cleanup
Tom Rini
- [U-Boot] [PATCH v5 01/26] mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND
Tom Rini
- [U-Boot] [PATCH v5 02/26] mtd: rename CONFIG_MTD -> CONFIG_DM_MTD
Tom Rini
- [U-Boot] [PATCH v5 03/26] mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD
Tom Rini
- [U-Boot] [PATCH v5 05/26] mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash
Tom Rini
- [U-Boot] [PATCH v5 04/26] mtd: ensure MTD is compiled when there is a NOR flash
Tom Rini
- [U-Boot] [PATCH v5 06/26] mtd: ensure MTD is compiled when there is a SPI NOR flash using MTD
Tom Rini
- [U-Boot] [PATCH v5 07/26] mtd: ensure UBI is compiled when using fastmap
Tom Rini
- [U-Boot] [PATCH v5 08/26] mtd: ensure MTD is compiled when UBI is used
Tom Rini
- [U-Boot] [PATCH v5 09/26] mtd: ensure UBI is compiled when CMD_UBI is selected
Tom Rini
- [U-Boot] [PATCH v5 10/26] mtd: ensure UBI is compiled when ENV_IS_IN_UBI is selected
Tom Rini
- [U-Boot] [PATCH v5 11/26] mtd: ensure MTD_RAW_NAND is compiled when ENV_IS_IN_NAND is selected
Tom Rini
- [U-Boot] [PATCH v5 12/26] mtd: ensure CMD_NAND is compiled when its options are selected
Tom Rini
- [U-Boot] [PATCH v5 13/26] mtd: ensure MTD is compiled when CMD_MTDPARTS is selected
Tom Rini
- [U-Boot] [PATCH v5 14/26] configs: move CONFIG_MTD in defconfigs when set in arch includes
Tom Rini
- [U-Boot] [PATCH v5 15/26] configs: remove raw NAND core from k2g defconfigs
Tom Rini
- [U-Boot] [PATCH v5 16/26] configs: remove MTD support from bcm11130 and M54418TWR defconfigs
Tom Rini
- [U-Boot] [PATCH v5 17/26] configs: socfpga: mcvevk: Remove useless UBI infos
Tom Rini
- [U-Boot] [PATCH v5 18/26] configs: ls104x/ls108x/ls208x: Build the raw NAND core with TFABOOT
Tom Rini
- [U-Boot] [PATCH v5 19/26] mtd: nand: add includes in NAND core to avoid warnings
Tom Rini
- [U-Boot] [PATCH v5 20/26] dfu: add dependency on the raw NAND core
Tom Rini
- [U-Boot] [PATCH v5 21/26] mtd: nor: NOR flashes depend on MTD
Tom Rini
- [U-Boot] [PATCH v5 22/26] mtd: spi: SPI_FLASH_MTD depends on MTD
Tom Rini
- [U-Boot] [PATCH v5 23/26] cmd: mtdparts: Kconfig: join mtdparts command entry with its options
Tom Rini
- [U-Boot] [PATCH v6 1/3] cmd: nand/sf: isolate legacy code
Tom Rini
- [U-Boot] [PATCH v6 2/3] cmd: make MTD commands depend on MTD
Tom Rini
- [U-Boot] [PATCH v6 3/3] mtd: Makefile: deep cleanup
Tom Rini
- [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] [PATCH v2 1/1] net: avoid address-of-packed-member error
Tom Rini
- [PATCH v2] arm64: zynqmp: Add support for u-boot.itb generation with ATF
Tom Rini
- Load Debian/Fedora via EFI
Tom Rini
- [U-Boot] [PATCH v2] Prevented possible null dereference.
Tom Rini
- [U-Boot] [PATCH v2 16/16] travis: add packages for UEFI secure boot test
Tom Rini
- [PATCH v4 1/6] fat: write: fix broken write to fragmented files
Tom Rini
- [U-Boot] [PATCH] ARM: omapl138_lcdk: Shrink code size by building with Thumb
Tom Rini
- [U-Boot] [PATCH 2/2] Fix typo in macros, "FIRMEWARE" -> "FIRMWARE"
Tom Rini
- [U-Boot] [PATCH] ARM: da850-evm: Disable SYS_MMCSD_RAW_MODE_USE_SECTOR
Tom Rini
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Tom Rini
- [U-Boot] [PATCH] test/py: test_fs: add tests for creating/deleting many files
Tom Rini
- [U-Boot] [PATCH] fs: fat: handle deleted directory entries correctly
Tom Rini
- [U-Boot] [PATCH] drivers: optee: rpmb: fix returning CID to TEE
Tom Rini
- [U-Boot] [PATCH] drivers: pci: ignore disabled devices
Tom Rini
- [U-Boot] [RESEND PATCH v2] spl: Introduce SPL_DM_GPIO Kconfig define
Tom Rini
- [U-Boot] [PATCH] iminfo: add missing map_sysmem
Tom Rini
- [U-Boot] [PATCH] cmd: cp: add missing map_sysmem
Tom Rini
- [PATCH] cmd/Kconfig: Add more dependencies to OSE bootm support
Tom Rini
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Tom Rini
- [gitlab-ci-runner PATCH 1/2] Dockerfile: Update to the bionic-20191029 tag
Tom Rini
- [gitlab-ci-runner PATCH 2/2] Dockerfile: Add required utilities for EFI Secure Boot tests
Tom Rini
- [PATCH] net: nfs: Only link in NFS code outside of SPL builds
Tom Rini
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Tom Rini
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Tom Rini
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Tom Rini
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Tom Rini
- [U-Boot] Maximum size of u-boot.imx for TBS2910 board
Tom Rini
- [U-Boot] [PATCH] spl: fix entry_point equal to load_addr
Tom Rini
- [U-Boot] [PATCH] Add -pthread to HOSTLOADLIBES_mkimage
Tom Rini
- Pull request: u-boot-rockchip-20191206
Tom Rini
- [PATCH] imx: dts: tbs2910: add u-boot dtsi to shrink image size
Tom Rini
- U-Boot 2020.01-rc4 - PCI support missing on Trimslice Pro
Tom Rini
- [RESEND PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion
Tom Rini
- [PATCH 1/1] arch: arm: Program GIC LPI configuration table
Tom Rini
- [U-Boot,1/8] ARM: MediaTek: Add support for MediaTek MT7622 SoC
Tom Rini
- [U-Boot,8/8] Add support for MT7622 reference board
Tom Rini
- [PATCH] buildman: Ignore blank lines during size checks
Tom Rini
- [U-Boot] [PATCH v3 1/6] cmd: Migrate from_env() from pxe.c to nvedit.c
Tom Rini
- [U-Boot] [PATCH v3 2/6] cmd: Prepare sysboot command independence
Tom Rini
- [U-Boot] [PATCH v3 3/6] cmd: sysboot: Create a sysboot command dedicated file
Tom Rini
- [U-Boot] [PATCH v3 4/6] cmd: pxe_utils: Fix checkpatch WARNING/CHECK
Tom Rini
- [U-Boot] [PATCH v3 5/6] cmd: sysboot: Fix checkpatch WARNING/CHECK
Tom Rini
- [U-Boot] [PATCH v3 6/6] cmd: pxe: Fix checkpatch WARNING/CHECK
Tom Rini
- [U-Boot] [PATCH v3 01/16] linux_compat: move kmemdup() from ubifs.c to linux_compat.c
Tom Rini
- [U-Boot] [PATCH v3 02/16] rtc.h: add struct udevice declaration
Tom Rini
- [U-Boot] [PATCH v3 03/16] rtc: move date.c from drivers/rtc/ to lib/
Tom Rini
- [U-Boot] [PATCH v3 04/16] lib: add mktime64() for linux compatibility
Tom Rini
- [U-Boot] [PATCH v3 05/16] include: kernel.h: include printk.h
Tom Rini
- [U-Boot] [PATCH v3 06/16] linux/time.h: include vsprintf.h
Tom Rini
- [U-Boot] [PATCH v3 07/16] cmd: add asn1_compiler
Tom Rini
- [U-Boot] [PATCH v3 08/16] Makefile: add build script for asn1 parsers
Tom Rini
- [U-Boot] [PATCH v3 09/16] lib: add asn1 decoder
Tom Rini
- [U-Boot] [PATCH v3 10/16] doc: add README for asn1 compiler and decoder
Tom Rini
- [U-Boot] [PATCH v3 11/16] lib: add oid registry utility
Tom Rini
- [U-Boot] [PATCH v3 12/16] lib: crypto: add public key utility
Tom Rini
- [U-Boot] [PATCH v3 13/16] lib: crypto: add rsa public key parser
Tom Rini
- [U-Boot] [PATCH v3 14/16] lib: crypto: add x509 parser
Tom Rini
- [U-Boot] [PATCH v3 15/16] lib: crypto: add pkcs7 message parser
Tom Rini
- [U-Boot] [PATCH v3 16/16] test: add asn1 unit test
Tom Rini
- [PATCH] Makefile: Ensure tools directory exists in output prior to use
Tom Rini
- [PATCH] imx: dts: tbs2910: add u-boot dtsi to shrink image size
Tom Rini
- [U-Boot] [PATCH v4 1/6] lib: rsa: decouple rsa from FIT image verification
Tom Rini
- i.MX8MM-EVK Boot failure
Tom Rini
- [U-Boot] [PATCH v3 14/16] lib: crypto: add x509 parser
Tom Rini
- [PATCH v6 000/102] x86: Add initial support for apollolake
Tom Rini
- Please pull u-boot-x86
Tom Rini
- [PATCH v6 000/102] x86: Add initial support for apollolake
Tom Rini
- [U-Boot] amlogic a96 mini
Tom Rini
- [RESEND PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion
Tom Rini
- [PATCH v2] arm64: zynqmp: Add support for u-boot.itb generation with ATF
Tom Rini
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Tom Rini
- [GIT PULL] Pull request: u-boot-imx u-boot-imx-20191209
Tom Rini
- [PATCH 1/1] linux/types.h: fix typo unchar
Tom Rini
- [PATCH 1/1] arm: -march=armv5t for ARM11
Tom Rini
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Tom Rini
- Pull request: u-boot-net.git master
Tom Rini
- Pull request: u-boot-net.git master
Tom Rini
- Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] Pull request: u-boot-riscv/master
Tom Rini
- [U-Boot] [PATCH] ARM: DRA7: Fixup DSP OPP_HIGH clock rate on DRA76P/DRA77P SoCs
Tom Rini
- [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
Tom Rini
- [PATCH v2] arm64: zynqmp: Add support for u-boot.itb generation with ATF
Tom Rini
- [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
Tom Rini
- [PATCH v2 00/16] efi_loader: add secure boot support
Tom Rini
- Please pull u-boot-video
Tom Rini
- [PATCH v2 00/16] efi_loader: add secure boot support
Tom Rini
- [PULL] u-boot-atmel-fixes-2020.01-a
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [GIT PULL] Please pull fixes for RPi targeted for v2020.01 release
Tom Rini
- [PATCH 14/35] common: Drop CONFIG_HAS_POST
Tom Rini
- [PATCH 33/35] common: Move and rename CONFIG_SYS_SUPPORT_64BIT_DATA
Tom Rini
- [PATCH 07/35] common: Move functions for loading from fat/ext2 to fs.h
Tom Rini
- [PATCH 25/35] image: Rename load_addr, save_addr, save_size
Tom Rini
- Please pull u-boot-dm/next to next branch
Tom Rini
- [U-Boot] [PATCH v2] arm: ti: dra7: move BOOTP_DNS2 and PHY_TI in defconfig
Tom Rini
- [PATCH 1/1] common: remove duplicate typedef for uchar
Tom Rini
- [PATCH 1/1] doc: fitImage: example of a signature node
Tom Rini
- [PATCH] doc: really get rid of Documentation/ directory
Tom Rini
- [PATCH 1/1] mailmap: Update mail address for Boris Brezillon
Tom Rini
- [PATCH] dts: am335x-brsmarc1/xre1: insert phy_id again
Tom Rini
- [PATCH] sysreset_mpc83xx: fix mcp83xx -> mpc83xx typo
Tom Rini
- [ANN] U-Boot v2020.01-rc5 released
Tom Rini
- [PATCH v3] board_f.c: Insure gd->new_bootstage alignment
Tom Rini
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Tom Rini
- Please pull u-boot-x86/next to next branch
Tom Rini
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Tom Rini
- [U-Boot] Please pull from u-boot-i2c next
Tom Rini
- [PULL] Pull request: u-boot-stm32 u-boot-stm32-20191218
Tom Rini
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Tom Rini
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Tom Rini
- Pull request: u-boot-net.git master
Tom Rini
- [PULL] u-boot-usb/master
Tom Rini
- Please pull u-boot-x86/next to next branch
Tom Rini
- pull request u-boot-mpc85xx to next branch
Tom Rini
- [U-Boot] [uboot PATCH 1/4] phy: ti-pipe3: Use TRM recommended settings for SATA DPLL
Tom Rini
- [U-Boot] [uboot PATCH 2/4] phy: ti-pipe3: Introduce mode property in driver data
Tom Rini
- [U-Boot] [uboot PATCH 3/4] phy: ti-pipe3: improve DPLL stability for SATA & USB
Tom Rini
- [U-Boot] [uboot PATCH 4/4] phy: ti-pipe3: Fix SATA & USB PHY power up sequence
Tom Rini
- [PATCH] board: davinci: Update OMAPL138_LCDK maintainer
Tom Rini
- Pull request: u-boot-spi/master
Tom Rini
- Pull request: u-boot-sunxi/master
Tom Rini
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Tom Rini
- [GIT PULL] Pull request: u-boot-imx u-boot-imx-20191228
Tom Rini
- [PATCH v1] Revert "core: device: use dev_power_domain_on"
Tom Rini
- [PATCH] travis: Setup latest qemu version for Versal
Tom Rini
- [PATCH 1/1] usb: avoid -Werror=address-of-packed-member
Tom Rini
- [PATCH] RFE: tools: fix parallel build of tools-all
Peter Robinson
- [PATCH] RFE: tools: fix parallel build of tools-all
Peter Robinson
- [PATCH] RFE: tools: fix parallel build of tools-all
Peter Robinson
- [PATCH] mtd: spi-nor: ids: Add GigaDevice gd25q128
Peter Robinson
- [PATCH v2 1/4] image: Add IH_OS_EFI for EFI chain-load boot
Peter Robinson
- [PATCH] imx8mq_evk: Update the required ATF branch
Peter Robinson
- [Patch] Add support for GD25Q128C SPI NOR chip
Peter Robinson
- [PATCH] dfu: Add option to skip empty pages when flashing UBI images to NAND
Guillermo Rodríguez
- [U-Boot] [v2 1/5] Revert "ata: fsl_ahci: Add sata DM support for Freescale powerpc socs"
Stefan Roese
- [U-Boot] [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Stefan Roese
- [PATCH] configs: clearfog: enable SPL_DM_GPIO to fix boot from SD
Stefan Roese
- [RFC] new board VoCore2
Stefan Roese
- [Patch v2 1/7] spi: Transform the FSL QuadSPI driver to use the SPI MEM API
Stefan Roese
- [PATCH 1/1] Port to new board "VoCore2"
Stefan Roese
- [PATCH v2] sun8i: h3: Support H3 variant of Orange Pi Zero Plus 2
Diego Rondini
- Sourcing a signed boot script
Diego Rondini
- Sourcing a signed boot script
Diego Rondini
- [U-Boot] [PATCH v4 2/2] cmd: Add dtimg command
Eugeniu Rosca
- [U-Boot] [PATCH v2 1/8] image: android: Add functions for handling dtb field
Eugeniu Rosca
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Eugeniu Rosca
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Eugeniu Rosca
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Eugeniu Rosca
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Eugeniu Rosca
- [U-Boot] [PATCH v2 3/8] cmd: bootimg: Add bootimg command
Eugeniu Rosca
- [PATCH 0/3] cmd: dtimg: Rename to adtimg and refactor usage style
Eugeniu Rosca
- [PATCH 1/3] dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg
Eugeniu Rosca
- [PATCH 2/3] cmd: adtimg: Rename internal symbols
Eugeniu Rosca
- [PATCH 3/3] cmd: adtimg: Refactor usage style
Eugeniu Rosca
- serial_bcm283x_mu driver crashes on RPi CM 1
Ed Rose
- [PATCH 1/7] ARM: MediaTek: Add support for MediaTek MT8512 SoC
Oleksandr Rybalko
- [PATCH] pico-imx7d: Convert to DM_ETH
Otavio Salvador
- i.MX8MM-EVK Boot failure
Ricardo Salveti
- i.MX8MM-EVK Boot failure
Ricardo Salveti
- [PATCH] dts: am335x-brsmarc1/xre1: insert phy_id again
Hannes Schmelzer
- [U-Boot] [PATCH v1 00/29] convert aristainetos board to DM
Heiko Schocher
- [U-Boot] [PATCH v1 01/29] imx6: remove aristainetos board
Heiko Schocher
- [U-Boot] [PATCH v1 02/29] video: lg4573: convert to DM
Heiko Schocher
- [U-Boot] [PATCH v1 03/29] imx6: aristainetos: move defines to Kconfig
Heiko Schocher
- [U-Boot] [PATCH v1 04/29] imx6: aristainetos: remove 2b version
Heiko Schocher
- [U-Boot] [PATCH v1 05/29] imx6: aristainetos: disable gigabit support
Heiko Schocher
- [U-Boot] [PATCH v1 06/29] imx6: aristainetos: add device tree from linux
Heiko Schocher
- [U-Boot] [PATCH v1 07/29] imx6: aristainetos: add thumb build
Heiko Schocher
- [U-Boot] [PATCH v1 08/29] imx6: aristainetos: remove aristainetos-v2.c
Heiko Schocher
- [U-Boot] [PATCH v1 09/29] imx6: aristainetos: prepare dts for other board versions
Heiko Schocher
- [U-Boot] [PATCH v1 10/29] imx6: aristainetos: add DM_SERIAL support
Heiko Schocher
- [U-Boot] [PATCH v1 11/29] imx6: aristainetos: convert to DM_MMC
Heiko Schocher
- [U-Boot] [PATCH v1 12/29] imx6: aristainetos: convert gpio pins to DM and DTS
Heiko Schocher
- [U-Boot] [PATCH v1 13/29] imx6: aristainetos: convert to DM_USB
Heiko Schocher
- [U-Boot] [PATCH v1 14/29] imx6: aristainetos: convert CONFIG_DM_SPI
Heiko Schocher
- [U-Boot] [PATCH v1 15/29] imx6: aristainetos: enable DM_ETH
Heiko Schocher
- [U-Boot] [PATCH v1 16/29] imx6: aristainetos: add DM_VIDEO support
Heiko Schocher
- [U-Boot] [PATCH v1 17/29] imx6: aristainetos: add DM_I2C support
Heiko Schocher
- [U-Boot] [PATCH v1 18/29] imx6: aristainetos: convert to DM_PWM/DM_BACKLIGHT
Heiko Schocher
- [U-Boot] [PATCH v1 19/29] imx6: aristainetos: get rid of CONFIG_BOARDNAME
Heiko Schocher
- [U-Boot] [PATCH v1 20/29] imx6: aristainetos: add i2c eeprom support
Heiko Schocher
- [U-Boot] [PATCH v1 21/29] imx6: aristainetos: add AUTOBOOT_KEYED
Heiko Schocher
- [U-Boot] [PATCH v1 22/29] imx6: aristainetos: add version variable
Heiko Schocher
- [U-Boot] [PATCH v1 23/29] imx6: aristainetos: cleanup bootmode settings
Heiko Schocher
- [U-Boot] [PATCH v1 24/29] imx6: aristainetos: WDT DM conversion enable WDT reset
Heiko Schocher
- [U-Boot] [PATCH v1 25/29] imx6: aristainetos: cleanup default Environment
Heiko Schocher
- [U-Boot] [PATCH v1 26/29] imx6: aristainetos: enable HAB boot
Heiko Schocher
- [U-Boot] [PATCH v1 27/29] imx6: aristainetos: readd aristainetos 2b board
Heiko Schocher
- [U-Boot] [PATCH v1 28/29] imx6: aristainetos: add aristainetos 2b csl
Heiko Schocher
- [U-Boot] [PATCH v1 29/29] imx6: aristainetos: add support for rev C board
Heiko Schocher
- [U-Boot] Sharing a hardware lab
Heiko Schocher
- [PATCH v3] warp7: Fix U-Boot corruption after saving the environment
Heiko Schocher
- Wandboard - I2C error when booting with HDMI cable
Heiko Schocher
- [PATCH] i2c: i2c_cdns: fix write timeout on fifo boundary
Heiko Schocher
- gtlab slow?
Heiko Schocher
- [PATCH] i2c: i2c_cdns: fix write timeout on fifo boundary
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [PATCH] cmd/eeprom.c: prepend 0x to hex numbers in output message format
Heiko Schocher
- [U-Boot][PATCH 1/3] i2c: add support for offset overflow in to address
Heiko Schocher
- [U-Boot][PATCH 2/3] dm: i2c: EEPROM simulator allow tests visibility of addr and offset
Heiko Schocher
- [U-Boot][PATCH 3/3] dm: i2c: EEPROM simulator add tests for addr offset mask
Heiko Schocher
- [U-Boot][PATCH 1/2] misc: i2c_eeprom: add fixed partitions support
Heiko Schocher
- [U-Boot][PATCH 2/2] misc: i2c_eeprom: add size query
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c next
Heiko Schocher
- Kindly need help debugging start of kernel
Matthias Schoepfer
- [U-Boot] [PATCH 1/1] efi_loader: pass address to efi_install_fdt()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: pass address to efi_install_fdt()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: pass address to efi_install_fdt()
Heinrich Schuchardt
- Load Debian/Fedora via EFI
Heinrich Schuchardt
- Pull request for UEFI sub-system for efi-2020-01-rc5
Heinrich Schuchardt
- [PATCH v2 00/16] efi_loader: add secure boot support
Heinrich Schuchardt
- [PATCH v2 1/1] efi_loader: pass address to efi_install_fdt()
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: use hardware device tree by default
Heinrich Schuchardt
- [PATCH 2/2] rpi: Enable DRAM bank initialization on arm64
Heinrich Schuchardt
- [PATCH 0/2] travis-ci: provide 'addr' in file2env()
Heinrich Schuchardt
- [PATCH 1/2] travis-ci: provide 'addr' in file2env()
Heinrich Schuchardt
- [PATCH 2/2] travis-ci: set load address for files
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] net: avoid address-of-packed-member error
Heinrich Schuchardt
- Load Debian/Fedora via EFI
Heinrich Schuchardt
- [PATCH] imx: dts: tbs2910: add u-boot dtsi to shrink image size
Heinrich Schuchardt
- [PATCH 1/1] arm: -march=armv5t for ARM11
Heinrich Schuchardt
- [U-Boot] [PATCH v3 14/16] lib: crypto: add x509 parser
Heinrich Schuchardt
- [PATCH 1/1] linux/types.h: fix typo unchar
Heinrich Schuchardt
- [PATCH v2 0/4] efi_loader: prepare for FIT images
Heinrich Schuchardt
- [PATCH v2 1/4] efi_loader: pass address to efi_install_fdt()
Heinrich Schuchardt
- [PATCH v2 2/4] efi_loader: use hardware device tree by default
Heinrich Schuchardt
- [PATCH v2 3/4] efi_loader: carve out efi_run_image()
Heinrich Schuchardt
- [PATCH v2 4/4] efi_loader: export efi_install_fdt()
Heinrich Schuchardt
- [U-Boot] [PATCH 0/2] Add support for booting EFI FIT images
Heinrich Schuchardt
- [PATCH 0/2] sandbox: enable UEFI unit tests
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: adjust file system info
Heinrich Schuchardt
- [U-Boot] [PATCH 0/2] Add support for booting EFI FIT images
Heinrich Schuchardt
- [PATCH 1/1] common: remove duplicate typedef for uchar
Heinrich Schuchardt
- [PATCH 2/2] configs: sandbox: enable CONFIG_CMD_BOOTEFI_SELFTEST
Heinrich Schuchardt
- [PATCH v2 4/4] doc: uefi.rst: Document launching UEFI binaries from FIT images
Heinrich Schuchardt
- [PATCH v2 1/4] image: Add IH_OS_EFI for EFI chain-load boot
Heinrich Schuchardt
- [PATCH v2 2/4] bootm: Add a bootm command for type IH_OS_EFI
Heinrich Schuchardt
- [PATCH 1/1] doc: fitImage: example of a signature node
Heinrich Schuchardt
- [PATCH v2 2/4] bootm: Add a bootm command for type IH_OS_EFI
Heinrich Schuchardt
- [PATCH v2 3/4] doc: Add sample uefi.its image description file
Heinrich Schuchardt
- [PATCH v2 2/4] bootm: Add a bootm command for type IH_OS_EFI
Heinrich Schuchardt
- [PATCH v2 2/4] bootm: Add a bootm command for type IH_OS_EFI
Heinrich Schuchardt
- [PATCH 1/1] mkimage: simplify fit_check_params()
Heinrich Schuchardt
- [PATCH 2/2] configs: sandbox: enable CONFIG_CMD_BOOTEFI_SELFTEST
Heinrich Schuchardt
- [PATCH v2 2/4] bootm: Add a bootm command for type IH_OS_EFI
Heinrich Schuchardt
- [PATCH v3 0/4] efi_loader: prepare for FIT images
Heinrich Schuchardt
- [PATCH v3 1/4] efi_loader: pass address to efi_install_fdt()
Heinrich Schuchardt
- [PATCH v3 2/4] efi_loader: use hardware device tree by default
Heinrich Schuchardt
- [PATCH v3 3/4] efi_loader: carve out efi_run_image()
Heinrich Schuchardt
- [PATCH v3 4/4] efi_loader: export efi_install_fdt()
Heinrich Schuchardt
- [PATCH 16/35] common: Move type declarations to linux/types.h
Heinrich Schuchardt
- [PATCH 07/35] common: Move functions for loading from fat/ext2 to fs.h
Heinrich Schuchardt
- [PATCH 09/35] common: Move jumptable_init() out of common.h
Heinrich Schuchardt
- email address of Boris Brezillon
Heinrich Schuchardt
- [PATCH 1/1] mailmap: Update mail address for Boris Brezillon
Heinrich Schuchardt
- [BUG] common/usb.c: taking address of packed member of ‘struct usb_device_descriptor’ may result in an unaligned pointer value
Heinrich Schuchardt
- [BUG] POWER: undefined reference to `_restgpr_25_x'
Heinrich Schuchardt
- [PATCH v2 1/1] efi_selftest: Update .gitignore
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: git ignore helloworld_efi.S
Heinrich Schuchardt
- [BUG] POWER: undefined reference to `_restgpr_25_x'
Heinrich Schuchardt
- [PATCH 1/1] usb: avoid -Werror=address-of-packed-member
Heinrich Schuchardt
- [PATCH 1/1] MAINTAINERS: assign usb.c and and usb_kbd.c
Heinrich Schuchardt
- [PATCH 1/1] usb: avoid -Werror=address-of-packed-member
Heinrich Schuchardt
- [PATCH 1/1] usb: avoid -Werror=address-of-packed-member
Heinrich Schuchardt
- [PATCH] cmd_ut: add a parameter prefix to the function cmd_ut_category
Heinrich Schuchardt
- [PATCH 1/1] usb: avoid -Werror=address-of-packed-member
Heinrich Schuchardt
- [PATCH v3 1/5] image: Add IH_OS_EFI for EFI chain-load boot
Heinrich Schuchardt
- [PATCH v3 2/5] bootm: Add a bootm command for type IH_OS_EFI
Heinrich Schuchardt
- [PATCH v3 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Heinrich Schuchardt
- [PATCH 1/1] sunxi: remove __packed from struct sunxi_prcm_reg
Heinrich Schuchardt
- [PATCH 1/1] test/py: use valid device tree in test_fit.py
Heinrich Schuchardt
- [PATCH v3 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Heinrich Schuchardt
- [PATCH v3 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Heinrich Schuchardt
- [PATCH 1/1] gitlab: use our own GRUB
Heinrich Schuchardt
- [PATCH 1/1] test/py: describe env__efi_loader_helloworld_file
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: clear screen should move cursor to home
Heinrich Schuchardt
- [PATCH 1/1] part: efi: comment for GPT_HEADER_SIGNATURE_UBOOT
Heinrich Schuchardt
- [PATCH 1/1] virtio: fix typo devicd
Heinrich Schuchardt
- [PATCH 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Heinrich Schuchardt
- [PATCH 1/3] efi_loader: Add guidcpy function
Heinrich Schuchardt
- [PATCH v4 8/8] virtio: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH v4 5/8] sandbox: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH v4 5/8] sandbox: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH 1/1] cmd: add rng command
Heinrich Schuchardt
- [PATCH v4 1/8] dm: rng: Add random number generator(rng) uclass
Heinrich Schuchardt
- [PATCH v4 8/8] virtio: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Heinrich Schuchardt
- [PATCH 3/3] efi_rng_protocol: Install the efi_rng_protocol on the root node
Heinrich Schuchardt
- [PATCH v5 5/8] sandbox: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH v5 1/8] dm: rng: Add random number generator(rng) uclass
Heinrich Schuchardt
- [PATCH v5 8/8] virtio: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH v5 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Heinrich Schuchardt
- [PATCH v5 8/8] virtio: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH v5 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Heinrich Schuchardt
- [PATCH v5 3/8] stm32mp1: rng: Add a driver for random number generator(rng) device
Heinrich Schuchardt
- [PATCH v4 0/7] usb: kbd: implement special keys
Heinrich Schuchardt
- [PATCH 1/1] doc: fix AX25-AE350 RISC-V documentation
Heinrich Schuchardt
- [RFC PATCH 1/1] doc: net: Rewrite network driver documentation
Heinrich Schuchardt
- [PATCH 2/2] bootm: Add a bootm command for type IH_OS_EFI
Heinrich Schuchardt
- [PATCH v4 0/7] usb: kbd: implement special keys
Heinrich Schuchardt
- [PATCH v6 8/8] virtio: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH v6 7/8] test: rng: Add basic test for random number generator(rng) uclass
Heinrich Schuchardt
- [PATCH v6 6/8] configs: sandbox: Enable random number generator(rng) device
Heinrich Schuchardt
- [PATCH v6 5/8] sandbox: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH v6 1/8] dm: rng: Add random number generator(rng) uclass
Heinrich Schuchardt
- [PATCH v6 0/8] Add a random number generator uclass
Heinrich Schuchardt
- [PATCH v6 8/8] virtio: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH v6 6/8] configs: sandbox: Enable random number generator(rng) device
Heinrich Schuchardt
- [PATCH v3 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Heinrich Schuchardt
- [PATCH 1/1] efi_selftest: unit test for EFI_RNG_PROTOCOL
Heinrich Schuchardt
- [PATCH 1/1] efi_loader remove __packed from struct efi_configuration_table
Heinrich Schuchardt
- [PATCH v3 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Heinrich Schuchardt
- [PATCH v3 1/3] efi_loader: Add guidcpy function
Heinrich Schuchardt
- [PATCH v3 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Heinrich Schuchardt
- [PATCH v7 8/8] virtio: rng: Add a random number generator(rng) driver
Heinrich Schuchardt
- [PATCH v4 0/3] Add support for efi_rng_protocol
Heinrich Schuchardt
- [PATCH 1/1] test/py: Fix broken 'notbuildconfigspec' marker
Heinrich Schuchardt
- [PATCH v4 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Heinrich Schuchardt
- [PATCH v4 2/5] bootm: Add a bootm command for type IH_OS_EFI
Heinrich Schuchardt
- [PATCH v4 2/5] bootm: Add a bootm command for type IH_OS_EFI
Heinrich Schuchardt
- [PATCH v4 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Heinrich Schuchardt
- [PATCH 1/1] travis-ci: provide env__efi_fit_tftp_file
Heinrich Schuchardt
- [PATCH 1/1] configs: qemu: enable FIT images on qemu_arm(64)_defconfig
Heinrich Schuchardt
- [PATCH v4 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Heinrich Schuchardt
- [PATCH v5 5/5] test/py: Create a test for launching UEFI binaries from FIT images
Heinrich Schuchardt
- [PATCH v2 1/1] travis-ci: provide env__efi_fit_tftp_file
Heinrich Schuchardt
- [PATCH v2 1/1] travis-ci: provide env__efi_fit_tftp_file
Heinrich Schuchardt
- [PATCH v2 1/1] travis-ci: provide env__efi_fit_tftp_file
Heinrich Schuchardt
- [PATCH v8 0/8] Add a random number generator uclass
Heinrich Schuchardt
- [PATCH 1/1] MAINTAINERS: assign drivers/rng/
Heinrich Schuchardt
- [PATCH v6 0/8] Add a random number generator uclass
Heinrich Schuchardt
- [PATCH] qemu: arm: Scan the pci bus in board_init
Heinrich Schuchardt
- [PATCH] qemu: arm: Scan the pci bus in board_init
Heinrich Schuchardt
- [PATCH] qemu: arm: Scan the pci bus in board_init
Heinrich Schuchardt
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Daniel Schwierzeck
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Daniel Schwierzeck
- [PATCH 0/1] Small patch series to add support for VoCore2 board.
Daniel Schwierzeck
- [PATCH 1/1] Port to new board "VoCore2"
Daniel Schwierzeck
- mips: SoC or board specific override of flush_dcache_range()
Daniel Schwierzeck
- MIPS: override of get_tbclk()
Daniel Schwierzeck
- [U-Boot] [PATCH 11/26] dts: mtmips: update reset controller node for mt7628
Daniel Schwierzeck
- gtlab slow?
Harald Seiler
- Boot from different partitions based on some condition
Harald Seiler
- [ANN] U-Boot v2020.01-rc5 released
Andy Shevchenko
- [ANN] U-Boot v2020.01-rc5 released
Andy Shevchenko
- [PATCH] usb: dwc3: Fix UTMI/UTMIW phy interface initialization
Andy Shevchenko
- [ANN] U-Boot v2020.01-rc5 released
Andy Shevchenko
- [PATCH 0/5] x86: Improve support for chain-loading U-Boot
Andy Shevchenko
- [U-Boot,0/8] Add support for MediaTek MT7622 SoC
Sam Shih
- [U-Boot,1/8] ARM: MediaTek: Add support for MediaTek MT7622 SoC
Sam Shih
- [U-Boot,2/8] pinctrl: mediatek: add driver for MT7622
Sam Shih
- [U-Boot,3/8] pinctrl: mediatek: add support for different pinctrl
Sam Shih
- [U-Boot,4/8] clk: mediatek: add driver for MT7622
Sam Shih
- [U-Boot,5/8] clk: mediatek: fix clock-rate overflow problem
Sam Shih
- [U-Boot,6/8] power: domain: add power domain support for MT7622
Sam Shih
- [U-Boot,7/8] mmc: add mmc and sd support for MT7622
Sam Shih
- [U-Boot,8/8] Add support for MT7622 reference board
Sam Shih
- [U-boot,v2,00/10] Add support for MediaTek MT7622 SoC
Sam Shih
- [U-boot,v2,01/10] ARM: MediaTek: Add support for MediaTek MT7622 SoC
Sam Shih
- [U-boot,v2,02/10] pinctrl: mediatek: add driver for MT7622
Sam Shih
- [U-boot, v2, 03/10] pinctrl: mediatek: add support for different pinctrl
Sam Shih
- [U-boot,v2,04/10] clk: mediatek: add driver for MT7622
Sam Shih
- [U-boot,v2,05/10] clk: mediatek: fix clock-rate overflow problem
Sam Shih
- [U-boot,v2,06/10] power: domain: add power domain support for MT7622
Sam Shih
- [U-boot,v2,07/10] mmc: add mmc and sd support for MT7622
Sam Shih
- [U-boot,v2,08/10] Add support for MT7622 reference board
Sam Shih
- [U-boot, v2, 09/10] arm: dts: mediatek: move u-boot properties to -u-boot.dtsi file
Sam Shih
- [U-boot,v2,10/10] configs: mediatek: fix mt7623n bpir2 defconfig
Sam Shih
- [PATCH 1/2] board: solidrun lx2160a-cex7: new board
Baruch Siach
- [PATCH 2/2] arm: dts: lx2160a-cex7: new dts
Baruch Siach
- [PATCH] configs: clearfog: enable SPL_DM_GPIO to fix boot from SD
Baruch Siach
- [PATCH] tools: imx8m_image: Change source path for DDR firmware to build dir
Baruch Siach
- [PATCH] imx: imx8mq: handle ESDHC in mxc_get_clock
Baruch Siach
- [PATCH] tools: imx8m_image: Change source path for DDR firmware to build dir
Baruch Siach
- [PATCH] global_data: remove unused mxc_i2c specific field
Baruch Siach
- [U-Boot] Load Debian/Fedora via EFI
Michal Simek
- [PATCH] arm64: zynqmp: Add support for u-boot.itb generation with ATF.
Michal Simek
- [PATCH] arm64: zynqmp: Do not assing MIO34 that early on zcu100
Michal Simek
- [PATCH v2] arm64: zynqmp: Do not assing MIO34 that early on zcu100
Michal Simek
- [PATCH v2] arm64: zynqmp: Add support for u-boot.itb generation with ATF
Michal Simek
- Load Debian/Fedora via EFI
Michal Simek
- [PATCH] arm64: zynqmp: Remove low level UART setting
Michal Simek
- [PATCH] arm: zynq: Remove low level UART setting
Michal Simek
- [PATCH] arm64: zynqmp: Remove nand partition description from mini-nand
Michal Simek
- [PATCH] arm64: zynqmp: Enable bind/unbind commands for all boards
Michal Simek
- [PATCH v2] arm64: zynqmp: Add support for u-boot.itb generation with ATF
Michal Simek
- [PATCH] arm64: zynqmp: Fix symlinks to SC psu_init* files
Michal Simek
- [PATCH] arm64: zynqmp: Add board_boot_order for MMC boot extension
Michal Simek
- [PATCH] arm64: zynqmp: Fix return value of board_fit_config_name_match
Michal Simek
- [PATCH] arm: xilinx: Use device tree which can be passed on cmd line
Michal Simek
- [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
Michal Simek
- [PATCH 1/2] arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform
Michal Simek
- [PATCH 2/2] arm64: zynqmp: Use zynqmp_virt platform
Michal Simek
- [PATCH v2] arm64: zynqmp: Add support for u-boot.itb generation with ATF
Michal Simek
- [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
Michal Simek
- [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
Michal Simek
- [PATCH 0/2] arm64: zynqmp: Cleanup defconfigs
Michal Simek
- want to confirm that include/configs/xilinx_zynqmp*.h files seem unused
Michal Simek
- [PATCH] arm64: versal: Fix emmc boot mode boot_target issue
Michal Simek
- [PATCH] arm64: zynqmp: Fix emmc boot mode boot_target sequennce
Michal Simek
- [PATCH] travis: Setup latest qemu version for Versal
Michal Simek
- xilinx_zynqmp.h: erroneous(?) "#define CONFIG_PANIC_HANG"
Michal Simek
- [PATCH] arm64: zynqmp: Move PANIC to Kconfig
Michal Simek
- [PATCH] board: xilinx: Add support for user configurable boot script offset
Michal Simek
- [PATCH] spl: atf: Add missing ndepth initialization
Michal Simek
- [PATCH] arm64: zynqmp: Do not call bss init and board_init_r from board_init_f
Michal Simek
- [PATCH 0/2] Move arasan nand driver to driver model
Michal Simek
- [PATCH 1/2] mtd: nand: Move arasan nand driver to driver model
Michal Simek
- [PATCH 2/2] mtd: nand: Remove hardcoded base address of nand
Michal Simek
- [PATCH 0/2] Extend board_fdt_blob_setup() to support OF_SEPARATE
Michal Simek
- [PATCH 1/2] arm64: zynqmp: Rename fw_dtb variable to fdt_blob
Michal Simek
- [PATCH 2/2] arm64: zynqmp: Add support for OF_SEPARATE with board DTB
Michal Simek
- [PATCH 0/2] Enable private ATF handoff structure
Michal Simek
- [PATCH 1/2] spl: atf: Enable option to rewrite bl2_plat_get_bl31_params()
Michal Simek
- [PATCH 2/2] arm: zynqmp: Wire SPL/ATF handoff structure properly
Michal Simek
- [PATCH] arm64: Enable INIT_SP_RELATIVE by default when POC is enabled
Michal Simek
- [U-Boot] [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Kuldeep Singh
- [U-Boot] [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Kuldeep Singh
- [U-Boot] [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Kuldeep Singh
- [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Kuldeep Singh
- [PATCH] net: pfe_eth: Use spi_flash_read API to access flash memory
Kuldeep Singh
- [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Kuldeep Singh
- [PATCH] configs: ls1012ardb: Enable CONFIG_SYS_RELOC_GD_ENV_ADDR
Kuldeep Singh
- [EXT] Re: [PATCH 0/8] Transition of fsl qspi driver to spi-mem framework
Kuldeep Singh
- [Patch v2 0/7] Transition of fsl qspi driver to spi-mem framework
Kuldeep Singh
- [Patch v2 1/7] spi: Transform the FSL QuadSPI driver to use the SPI MEM API
Kuldeep Singh
- [Patch v2 2/7] treewide: Remove unused FSL QSPI config options
Kuldeep Singh
- [Patch v2 3/7] configs: ls1043a: Move CONFIG_FSL_QSPI to defconfig
Kuldeep Singh
- [Patch v2 4/7] imx: imx6sx: Remove unused 'num-cs' property
Kuldeep Singh
- [Patch v2 5/7] configs: ls1012a: Enable CONFIG_SPI_FLASH_SPANSION
Kuldeep Singh
- [Patch v2 6/7] configs: ls1046a: Move SPI_FLASH_SPANSION to defconfig
Kuldeep Singh
- [Patch v2 7/7] treewide: Update fsl qspi node dt properties as per spi-mem driver
Kuldeep Singh
- [Patch v2 2/7] treewide: Remove unused FSL QSPI config options
Kuldeep Singh
- [Patch v2 1/7] spi: Transform the FSL QuadSPI driver to use the SPI MEM API
Kuldeep Singh
- [Patch v3 0/7] Transition of fsl qspi driver to spi-mem framework
Kuldeep Singh
- [Patch v3 1/7] spi: Transform the FSL QuadSPI driver to use the SPI MEM API
Kuldeep Singh
- [Patch v3 2/7] treewide: Remove unused FSL QSPI config options
Kuldeep Singh
- [Patch v3 3/7] configs: ls1043a: Move CONFIG_FSL_QSPI to defconfig
Kuldeep Singh
- [Patch v3 4/7] imx: imx6sx: Remove unused 'num-cs' property
Kuldeep Singh
- [Patch v3 5/7] configs: ls1012a: Enable CONFIG_SPI_FLASH_SPANSION
Kuldeep Singh
- [Patch v3 6/7] configs: ls1046a: Move SPI_FLASH_SPANSION to defconfig
Kuldeep Singh
- [Patch v3 7/7] treewide: Update fsl qspi node dt properties as per spi-mem driver
Kuldeep Singh
- [PATCH] net: pfe_eth: Use spi_flash_read API to access flash memory
Kuldeep Singh
- Query: Error: Unable to find signature node in Verified boot
Priyanka Singh
- [RFC PATCH] spi: spi-nor: Add dual flash support in spi-nor framework
Ashok Reddy Soma
- [RFC PATCH] spi: spi-nor: Add dual flash support in spi-nor framework
Ashok Reddy Soma
- I change chip main of the pico-imx7D SOM module. Now I need put u-boot.imx(bin) using imx_uart
Neuber Sousa
- [U-Boot] [PATCH RESEND v2 02/10] dma: ti: k3-udma: Query DMA channels allocated from Resource Manager
Grygorii Strashko
- [U-Boot] [PATCH RESEND v2 00/10] dma: ti: k3-udma: Add support for J721e
Grygorii Strashko
- [U-Boot] [PATCH v2 3/6] net: ti: am65-cpsw-nuss: Rework RX flow ID handling
Grygorii Strashko
- [U-Boot] [PATCH v2 5/6] arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes
Grygorii Strashko
- [U-Boot] [PATCH v2 0/6] J721e: Add networking support
Grygorii Strashko
- [PATCH 2/2] rockchip: misc: Don't fail if ethaddr is already set
Heiko Stuebner
- [PATCH 1/2] rockchip: misc: Only assign serial# variable if unset
Heiko Stuebner
- [PATCH] rockchip: px30: Change RK809 PMIC interrupt polarity
Heiko Stuebner
- [U-Boot] [PATCH v2 2/3] mach-imx: bootaux: add dcache flushing before enabling M4
Oleksandr Suvorov
- [U-Boot] [PATCH v2 1/3] mach-imx: bootaux: print stack pointer and reset vector
Oleksandr Suvorov
- [U-Boot] [PATCH v2 3/3] mach-imx: bootaux: elf firmware support
Oleksandr Suvorov
- [U-Boot] [PATCH v1 3/6] ARM: dts: imx6_apalis: introduce fec node
Oleksandr Suvorov
- [U-Boot] [PATCH v1 6/6] colibri_imx7: migrate to DM_ETH
Oleksandr Suvorov
- [U-Boot] [PATCH v1 1/6] ARM: dts: imx6_colibri: introduce fec node
Oleksandr Suvorov
- [U-Boot] [PATCH v1 2/6] colibri_imx6: migrate to DM_ETH
Oleksandr Suvorov
- [U-Boot] [PATCH v1 4/6] apalis_imx6: migrate to DM_ETH
Oleksandr Suvorov
- [U-Boot] [PATCH v1 5/6] ARM: dts: imx7: imx7_colibri: introduce fec node
Oleksandr Suvorov
- [PATCH v1] Revert "core: device: use dev_power_domain_on"
Oleksandr Suvorov
- [PATCH v1] colibri_imx7: disable HAB and CAAM support
Oleksandr Suvorov
- [PATCH v1] mailmap: Update mail address for Igor Opaniuk
Oleksandr Suvorov
- [PATCH v1] mach-imx: nandbcb: improve cmd help
Oleksandr Suvorov
- [U-Boot] [PATCH v4 0/6] Raspberry Pi4: add support for DFU over USB
Marek Szyprowski
- [U-Boot] [PATCH v4 1/6] fat: write: fix broken write to fragmented files
Marek Szyprowski
- [U-Boot] [PATCH v4 2/6] fat: write: adjust data written in each partial write
Marek Szyprowski
- [U-Boot] [PATCH v4 3/6] dfu: mmc: rearrange the code
Marek Szyprowski
- [U-Boot] [PATCH v4 4/6] dfu: mmc: remove file size limit for io operations
Marek Szyprowski
- [U-Boot] [PATCH v4 5/6] usb: dwc2_udc_otg: add bcm2835 SoC (Raspberry Pi4) support
Marek Szyprowski
- [U-Boot] [PATCH v4 6/6] config: enable DFU over USB on Raspberry Pi4 boards
Marek Szyprowski
- [U-Boot] [PATCH v2 04/16] efi_loader: add signature database parser
AKASHI Takahiro
- [PATCH v2 00/16] efi_loader: add secure boot support
AKASHI Takahiro
- [PATCH v2 00/16] efi_loader: add secure boot support
AKASHI Takahiro
- [U-Boot] [PATCH v3 14/16] lib: crypto: add x509 parser
AKASHI Takahiro
- [U-Boot] [PATCH v3 05/16] include: kernel.h: include printk.h
AKASHI Takahiro
- [PATCH v3 00/16] efi_loader: add secure boot support
AKASHI Takahiro
- [PATCH v3 01/16] include: pe.h: add signature-related definitions
AKASHI Takahiro
- [PATCH v3 02/16] efi_loader: add CONFIG_EFI_SECURE_BOOT config option
AKASHI Takahiro
- [PATCH v3 03/16] efi_loader: add signature verification functions
AKASHI Takahiro
- [PATCH v3 04/16] efi_loader: add signature database parser
AKASHI Takahiro
- [PATCH v3 05/16] efi_loader: variable: support variable authentication
AKASHI Takahiro
- [PATCH v3 06/16] efi_loader: variable: add secure boot state transition
AKASHI Takahiro
- [PATCH v3 07/16] efi_loader: variable: add VendorKeys variable
AKASHI Takahiro
- [PATCH v3 08/16] efi_loader: image_loader: support image authentication
AKASHI Takahiro
- [PATCH v3 09/16] efi_loader: set up secure boot
AKASHI Takahiro
- [PATCH v3 10/16] cmd: env: use appropriate guid for authenticated UEFI variable
AKASHI Takahiro
- [PATCH v3 11/16] cmd: env: add "-at" option to "env set -e" command
AKASHI Takahiro
- [PATCH v3 12/16] efi_loader, pytest: set up secure boot environment
AKASHI Takahiro
- [PATCH v3 13/16] efi_loader, pytest: add UEFI secure boot tests (authenticated variables)
AKASHI Takahiro
- [PATCH v3 14/16] efi_loader, pytest: add UEFI secure boot tests (image)
AKASHI Takahiro
- [PATCH v3 15/16] sandbox: add extra configurations for UEFI and related tests
AKASHI Takahiro
- [PATCH v3 16/16] travis: add packages for UEFI secure boot test
AKASHI Takahiro
- [PATCH v2 00/16] efi_loader: add secure boot support
AKASHI Takahiro
- [PATCH v2 00/16] efi_loader: add secure boot support
AKASHI Takahiro
- [U-Boot] [PATCH v4 1/6] lib: rsa: decouple rsa from FIT image verification
AKASHI Takahiro
- [PATCH v5 0/6] rsa: extend rsa_verify() for UEFI secure boot
AKASHI Takahiro
- [PATCH v5 1/6] lib: rsa: decouple rsa from FIT image verification
AKASHI Takahiro
- [PATCH v5 2/6] rsa: add CONFIG_RSA_VERIFY_WITH_PKEY config
AKASHI Takahiro
- [PATCH v5 3/6] include: image.h: add key info to image_sign_info
AKASHI Takahiro
- [PATCH v5 4/6] lib: rsa: generate additional parameters for public key
AKASHI Takahiro
- [PATCH v5 5/6] lib: rsa: add rsa_verify_with_pkey()
AKASHI Takahiro
- [PATCH v5 6/6] test: add rsa_verify() unit test
AKASHI Takahiro
- [PATCH v4 00/16] efi_loader: add secure boot support
AKASHI Takahiro
- [PATCH v4 01/16] include: pe.h: add signature-related definitions
AKASHI Takahiro
- [PATCH v4 02/16] efi_loader: add CONFIG_EFI_SECURE_BOOT config option
AKASHI Takahiro
- [PATCH v4 03/16] efi_loader: add signature verification functions
AKASHI Takahiro
- [PATCH v4 04/16] efi_loader: add signature database parser
AKASHI Takahiro
- [PATCH v4 05/16] efi_loader: variable: support variable authentication
AKASHI Takahiro
- [PATCH v4 06/16] efi_loader: variable: add secure boot state transition
AKASHI Takahiro
- [PATCH v4 07/16] efi_loader: variable: add VendorKeys variable
AKASHI Takahiro
- [PATCH v4 08/16] efi_loader: image_loader: support image authentication
AKASHI Takahiro
- [PATCH v4 09/16] efi_loader: set up secure boot
AKASHI Takahiro
- [PATCH v4 10/16] cmd: env: use appropriate guid for authenticated UEFI variable
AKASHI Takahiro
- [PATCH v4 11/16] cmd: env: add "-at" option to "env set -e" command
AKASHI Takahiro
- [PATCH v4 12/16] efi_loader, pytest: set up secure boot environment
AKASHI Takahiro
- [PATCH v4 13/16] efi_loader, pytest: add UEFI secure boot tests (authenticated variables)
AKASHI Takahiro
- [PATCH v4 14/16] efi_loader, pytest: add UEFI secure boot tests (image)
AKASHI Takahiro
- [PATCH v4 15/16] sandbox: add extra configurations for UEFI and related tests
AKASHI Takahiro
- [PATCH v4 16/16] travis: add packages for UEFI secure boot test
AKASHI Takahiro
- [PATCHv2 0/2] Intel Stratix10/Agilex Additions
Tan, Ley Foon
- [PATCHv2 1/2] arm: socfpga: stratix10: Enable SMMU access
Tan, Ley Foon
- [PATCHv2 2/2] ddr: socfpga: Enable ARM64 Non-Secure SDRAM ECC Access
Tan, Ley Foon
- [PATCHv2 0/2] Intel Stratix10/Agilex Additions
Tan, Ley Foon
- Pull request: socfpga-next
Tan, Ley Foon
- [GIT PULL] For socfpga-next
Tan, Ley Foon
- [PATCH] usb: dwc2: Add small delay after reset
Ley Foon Tan
- [PATCH 01/12] i2c: designware_i2c: Add more registers
Tan, Ley Foon
- [PATCH 03/12] i2c: designware_i2c: Include clk.h in the header file
Tan, Ley Foon
- [PATCH] usb: dwc2: Add small delay after reset
Tan, Ley Foon
- [PATCH v2 0/2] reset/usb: Add reset status
Ley Foon Tan
- [PATCH v2 1/2] reset: socfpga: Add reset status callback function
Ley Foon Tan
- [PATCH v2 2/2] usb: dwc2: Add polling for reset status
Ley Foon Tan
- [PATCH v4 2/2] sifive: fu540: Enable OF_SEPARATE
Jagan Teki
- [RFC PATCH] spi: spi-nor: Add dual flash support in spi-nor framework
Jagan Teki
- [PATCH 0/2] spi: rk_spi: Fix transfer size overflow
Jagan Teki
- [PATCH 1/2] Revert "rockchip: spi: fix off-by-one in chunk size computation"
Jagan Teki
- [PATCH 2/2] spi: rk_spi: Fix overflow max chunk size
Jagan Teki
- [PATCH 1/2] Revert "rockchip: spi: fix off-by-one in chunk size computation"
Jagan Teki
- [ANN] U-Boot v2020.01-rc5 released
Jagan Teki
- [PATCH] usb: dwc3: Fix UTMI/UTMIW phy interface initialization
Jagan Teki
- [PATCH v4 1/3] spi: nxp_fspi: new driver for the FlexSPI controller
Jagan Teki
- [PATCH 1/1] sunxi: remove __packed from struct sunxi_prcm_reg
Jagan Teki
- [PATCH 1/2] Revert "rockchip: spi: fix off-by-one in chunk size computation"
Jagan Teki
- [PATCH 00/11] rk3399: SPI boot support (fixes, updates)
Jagan Teki
- [PATCH 01/11] spi: rk: Limit transfers to (64K - 1) bytes
Jagan Teki
- [PATCH 02/11] distro_bootcmd: Add SF support
Jagan Teki
- [PATCH 03/11] rockchip: Include SF on distrocmd devices
Jagan Teki
- [PATCH 04/11] rk3399: Add boot flash script offet, size
Jagan Teki
- [PATCH 05/11] rk3399: Check MMC env while defining it
Jagan Teki
- [PATCH 06/11] env: kconfig: Restrict rockchip env for MMC
Jagan Teki
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Jagan Teki
- [PATCH 08/11] rockchip: dts: Sync ROC-RK3399-PC changes from Linux
Jagan Teki
- [PATCH 09/11] roc-pc-rk3399: Enable SPI Flash
Jagan Teki
- [PATCH 10/11] rockpro-rk3399: Enable SPI Flash
Jagan Teki
- [PATCH 11/11] roc-rk3399-pc: Add SPI boot support
Jagan Teki
- [PATCH 01/11] spi: rk: Limit transfers to (64K - 1) bytes
Jagan Teki
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Jagan Teki
- [PATCH V2 2/3] watchdog: designware: Convert to DM and DT probing
Jagan Teki
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Jagan Teki
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Jagan Teki
- Pull request: u-boot-spi/master
Jagan Teki
- Pull request: u-boot-sunxi/master
Jagan Teki
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Jagan Teki
- [PATCH v3 0/5] rk3399: Add redundant boot support
Jagan Teki
- [PATCH v3 1/5] rockchip: Add cpu-info
Jagan Teki
- [PATCH v3 2/5] rockchip: rk3399: Enable DISPLAY_CPUINFO
Jagan Teki
- [PATCH v3 3/5] arm: rockchip: Add common cru.h
Jagan Teki
- [PATCH v3 4/5] rockchip: Add common reset cause
Jagan Teki
- [PATCH v3 5/5] rockchip: rk3399: Add bootcount support
Jagan Teki
- [PATCH 11/11] roc-rk3399-pc: Add SPI boot support
Jagan Teki
- [PATCH v5 0/7] rockchip: Add Binman support
Jagan Teki
- [PATCH v5 1/7] Makefile: Add rockchip image type
Jagan Teki
- [PATCH v5 2/7] Makefile: rockchip: Suffix platform type with tpl name
Jagan Teki
- [PATCH v5 3/7] Makefile: rockchip: Support SPL-alone mkimage
Jagan Teki
- [PATCH v5 4/7] Makefile: rockchip: Use u-boot preferred spl name
Jagan Teki
- [PATCH v5 5/7] arm: dts: rk3036: Add rk3036-u-boot.dtsi
Jagan Teki
- [PATCH v5 6/7] rockchip: Add Single boot image (with binman, pad_cat)
Jagan Teki
- [PATCH v5 7/7] doc: boards: Add rockchip documentation
Jagan Teki
- [PATCH v5 7/7] doc: boards: Add rockchip documentation
Jagan Teki
- [PATCH 0/8] i.MX6: Engicam fixes/updates
Jagan Teki
- [PATCH 1/8] board: engicam: Cleanup fdt file and board mapping
Jagan Teki
- [PATCH 2/8] board: engicam: Fix the ethernet clock initialization
Jagan Teki
- [PATCH 3/8] configs: imx6-engicam: Drop fec phy address and mode
Jagan Teki
- [PATCH 4/8] dt-bindings: sound: Add fsl-imx-audmux.h from v5.4
Jagan Teki
- [PATCH 5/8] ARM: dts: icorem6: Sync engicam device trees from v5.4
Jagan Teki
- [PATCH 6/8] ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
Jagan Teki
- [PATCH 7/8] ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods
Jagan Teki
- [PATCH 8/8] ARM: dts: imx6qdli-icore: Add fec phy-handle
Jagan Teki
- [PATCH 1/1] doc: fix AX25-AE350 RISC-V documentation
Jagan Teki
- [PATCH] doc: fix opensbi build steps for AX25-AE350
Jagan Teki
- [PATCH 8/8] ARM: dts: imx6qdli-icore: Add fec phy-handle
Jagan Teki
- [PATCH v2 1/2] common: fdt_support: add support for setting usable memory
Joakim Tjernlund
- [PATCH] ddr: fsl: Impl. Erratum A008109
Joakim Tjernlund
- [RFC PATCH 0/2] Ethernet driver for GENET
Amit Singh Tomar
- [RFC PATCH 1/2] rpi: Update memory map to accommodate scb devices
Amit Singh Tomar
- [RFC PATCH 2/2] net: Add Support for GENET Ethernet controller
Amit Singh Tomar
- [U-Boot-Board-Maintainers] Raspberry pi 4 - u-boot - genet / scb
Amit Tomer
- [RFC PATCH 2/2] net: Add Support for GENET Ethernet controller
Amit Tomer
- Sunxi (pine64-lts) SPL load BL32
Amit Tomer
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Amit Tomer
- [PATCH 3/3] riscv: sifive: fu540: add SPL configuration
Amit Tomer
- [PATCH 1/2] Revert "rockchip: spi: fix off-by-one in chunk size computation"
Philipp Tomsich
- i.MX8MM-EVK Boot failure
Michael Nazzareno Trimarchi
- [PATCH 8/8] ARM: dts: imx6qdli-icore: Add fec phy-handle
Michael Nazzareno Trimarchi
- [PATCH] include: fix 'ulong' definition on musl targets
Sergei Trofimovich
- [PATCH] include: fix 'ulong' definition on musl targets
Sergei Trofimovich
- [PATCH v2 1/2] include: fix 'ulong' definition on musl targets
Sergei Trofimovich
- [PATCH v2 2/2] include/u-boot/crc.h: pull 'uint' definition on musl targets
Sergei Trofimovich
- [PATCH 5/5] arm64: dts: meson: add libretech-pc support
Chen-Yu Tsai
- SUNXI : CONFIG_VIDEO_SUNXI is never set
Chen-Yu Tsai
- [PATCH v3 2/3] efi: qemu: arm64: Add efi_rng_protocol implementation for the platform
Tuomas Tynkkynen
- [PATCH 10/11] rockpro-rk3399: Enable SPI Flash
Emmanuel Vadot
- [U-Boot] [GIT] Pull request: u-boot-dfu (29.11.2019)
Marek Vasut
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Marek Vasut
- [PULL] u-boot-sh/master
Marek Vasut
- [PATCH] usb: cdns3: ep0: Fix build warnings related to cache ops
Marek Vasut
- [PATCHv2 0/2] Intel Stratix10/Agilex Additions
Marek Vasut
- Pull request: socfpga-next
Marek Vasut
- Pull request: socfpga-next
Marek Vasut
- Pull request: socfpga-next
Marek Vasut
- [PATCH] configs: socfpga: fix building Stratix10 and Agilex
Marek Vasut
- [GIT PULL] For socfpga-next
Marek Vasut
- [GIT PULL] For socfpga-next
Marek Vasut
- [PATCH v1] T1024RDB: USB: Add a 10808 us delay in usb_scan_port
Marek Vasut
- Re: [BUG] common/usb.c: taking address of packed member of ‘struct usb_device_descriptor’ may result in an unaligned pointer value
Marek Vasut
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Marek Vasut
- [PATCH 1/1] MAINTAINERS: assign usb.c and and usb_kbd.c
Marek Vasut
- [PATCH 1/1] usb: avoid -Werror=address-of-packed-member
Marek Vasut
- [PATCH 1/1] usb: avoid -Werror=address-of-packed-member
Marek Vasut
- [PATCH 1/1] usb: avoid -Werror=address-of-packed-member
Marek Vasut
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Marek Vasut
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Marek Vasut
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Marek Vasut
- [PATCH 1/1] usb: avoid -Werror=address-of-packed-member
Marek Vasut
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Marek Vasut
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Marek Vasut
- [EXT] Re: [PATCH v1] T1024RDB: USB: Add a 10808 us delay in usb_scan_port
Marek Vasut
- [PATCH] net: dwc_eth_qos: Pass -1 to phy_connect() to scan for all PHYs
Marek Vasut
- [PATCH] stm32mp1: configs: Make all boot devices in distro boot conditional
Marek Vasut
- [PATCH] ARM: stm32: Allow overriding setup_mac_address()
Marek Vasut
- [PATCH] ARM: stm32: Fill in missing loadaddr
Marek Vasut
- [PATCH] ARM: stm32: Permit multiple board targets
Marek Vasut
- [PATCH] usb: dwc3: Fix UTMI/UTMIW phy interface initialization
Marek Vasut
- [PATCH] ARM: stm32: Fill in missing loadaddr
Marek Vasut
- [PATCH] ARM: stm32: Permit multiple board targets
Marek Vasut
- [PATCH] ARM: stm32: Permit multiple board targets
Marek Vasut
- [PATCH V2] ARM: stm32: Allow overriding setup_mac_address()
Marek Vasut
- [U-Boot] [PATCH] net/phy: Fix phy_connect() for phy addr 0
Marek Vasut
- [RFC PATCH] Revert "arm: Show cache warnings in U-Boot proper only"
Marek Vasut
- [RFC PATCH] Revert "arm: Show cache warnings in U-Boot proper only"
Marek Vasut
- [RFC PATCH] Revert "arm: Show cache warnings in U-Boot proper only"
Marek Vasut
- [PATCH] cmd: spi: Permit setting bus frequency
Marek Vasut
- [PULL] u-boot-usb/master
Marek Vasut
- [PATCH] usb: dwc2: Add small delay after reset
Marek Vasut
- [PATCH v2 1/2] reset: socfpga: Add reset status callback function
Marek Vasut
- [PATCH v2 2/2] usb: dwc2: Add polling for reset status
Marek Vasut
- FOSDEM Hardware Enablement Devroom: call for speakers.
Luc Verhaegen
- [PATCH] mpc83xx: make ARCH_MPC8309 select SYS_FSL_ERRATUM_ESDHC111
Rasmus Villemoes
- [PATCH] spl_fit.c: enable loading compressed u-boot from fit image
Rasmus Villemoes
- [PATCH] cmd/eeprom.c: prepend 0x to hex numbers in output message format
Rasmus Villemoes
- [PATCH] powerpc: mpc83xx: convert CONFIG_FSL_ELBC to Kconfig
Rasmus Villemoes
- [PATCH] mpc83xx: immap_83xx: add spi8xxx_t in immap for mpc8309
Rasmus Villemoes
- [PATCH] mpc83xx: set MPC83XX_GPIO_CTRLRS to 2 for MPC8309
Rasmus Villemoes
- [PATCH] doc: really get rid of Documentation/ directory
Rasmus Villemoes
- [PATCH] sysreset_mpc83xx: fix mcp83xx -> mpc83xx typo
Rasmus Villemoes
- commit "dm: spi: Avoid setting the speed with every transfer"
Rasmus Villemoes
- [PATCH] env: another attempt at fixing SPL build failures
Rasmus Villemoes
- [PATCH] mpc83xx_clk: always treat MPC83XX_CLK_PCI as invalid
Rasmus Villemoes
- SUNXI : CONFIG_VIDEO_SUNXI is never set
Arjan van Vught
- SUNXI : DE2 : H3 : Add support for setenv video-mode
Arjan van Vught
- [U-Boot] [PATCH] ARM: DRA7: Fixup DSP OPP_HIGH clock rate on DRA76P/DRA77P SoCs
Lokesh Vutla
- [PATCH v1] Revert "core: device: use dev_power_domain_on"
Lokesh Vutla
- [PATCH] board: davinci: Update OMAPL138_LCDK maintainer
Lokesh Vutla
- [uboot PATCH 0/4] phy: ti-pipe3: Match TRM sequence & settings
Lokesh Vutla
- [PATCH] arm: dts: k3-j721e: ddr: Update to 0.2 version of DDR config tool
Lokesh Vutla
- [PATCH] arm: mach-k3: Enable WA for R5F deadlock
Lokesh Vutla
- Garbage UART output on RPI 4 with upstream kernel DTB
Stefan Wahren
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Stefan Wahren
- [PATCH 1/3] net: Add support for Broadcom GENETv5 Ethernet controller
Stefan Wahren
- Garbage UART output on RPI 4 with upstream kernel DTB
Stefan Wahren
- Garbage UART output on RPI 4 with upstream kernel DTB
Stefan Wahren
- Garbage UART output on RPI 4 with upstream kernel DTB
Stefan Wahren
- [U-Boot] [PATCH] net: eth-uclass: ignore unavailable devices
Michael Walle
- [U-Boot] [PATCH] drivers: pci: ignore disabled devices
Michael Walle
- [PATCH v2 00/12] phy: atheros: dt bindings and cleanup
Michael Walle
- [PATCH v2 01/12] phy: atheros: Make RGMII Tx delays actually configurable for AR8035
Michael Walle
- [PATCH v2 02/12] phy: atheros: Use common functions for RGMII internal delays
Michael Walle
- [PATCH v2 03/12] phy: atheros: Clarify the configuration of the CLK_25M output pin
Michael Walle
- [PATCH v2 04/12] phy: atheros: Explicitly disable RGMII delays
Michael Walle
- [PATCH v2 05/12] phy: atheros: Clarify the intention of ar8021_config
Michael Walle
- [PATCH v2 06/12] phy: atheros: fix AR8021 PHY ID mask
Michael Walle
- [PATCH v2 07/12] phy: atheros: use defines for PHY IDs
Michael Walle
- [PATCH v2 08/12] phy: atheros: introduce debug read and write functions
Michael Walle
- [PATCH v2 09/12] phy: atheros: move delay config to common function
Michael Walle
- [PATCH v2 10/12] phy: atheros: add device tree bindings and config
Michael Walle
- [PATCH v2 11/12] phy: atheros: ar8035: remove static clock config
Michael Walle
- [PATCH v2 12/12] phy: atheros: consolidate {ar8031|ar8035}_config()
Michael Walle
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Michael Walle
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Michael Walle
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Michael Walle
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Michael Walle
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Michael Walle
- [U-Boot] [PATCH 1/9] phy: atheros: introduce debug read and write functions
Michael Walle
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Michael Walle
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Michael Walle
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Michael Walle
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Michael Walle
- [PATCH v2] drivers: net: fsl_enetc: Pass on primary MAC address to Linux
Michael Walle
- [U-Boot] [PATCH v2 1/2] spi: nxp_fspi: new driver for the FlexSPI controller
Michael Walle
- [PATCH v4 1/3] spi: nxp_fspi: new driver for the FlexSPI controller
Michael Walle
- [PATCH v4 2/3] arm: ls1028a: use the new flexspi driver
Michael Walle
- [PATCH v4 3/3] arm: dts: ls1028a: fix interrupt properties
Michael Walle
- [PATCH] dm: uclass: don't assign aliased seq numbers
Michael Walle
- [PATCH] drivers: net: fsl_enetc: use write_hwaddr()
Michael Walle
- [PATCH] dm: uclass: don't assign aliased seq numbers
Michael Walle
- [PATCH] drivers: net: fsl_enetc: use write_hwaddr()
Michael Walle
- [PATCH v2 1/2] drivers: net: fsl_enetc: use write_hwaddr()
Michael Walle
- [PATCH v2 2/2] drivers: net: fsl_enetc: add write_hwaddr() for LS1028A
Michael Walle
- [PATCH v2] dm: uclass: don't assign aliased seq numbers
Michael Walle
- [PATCH v6 081/102] x86: Add a generic Intel GPIO driver
Wolfgang Wallner
- [PATCH] configs: Enable SPL_FSL_PBL for some LayerScape platforms
Alison Wang
- [PATCH v2 01/19] arch: powerpc: add usb node in p3041 dts
Ran Wang
- [PATCH v2 02/19] configs: p3041ds: enable CONFIG_DM_USB support
Ran Wang
- [PATCH v2 03/19] arch: powerpc: add usb nodes to P1020 dts
Ran Wang
- [PATCH v2 04/19] configs: p1020: enable CONFIG_DM_USB support
Ran Wang
- [PATCH v2 05/19] arch: powerpc: add usb node to p2020 dts
Ran Wang
- [PATCH v2 06/19] configs: P2020: enable CONFIG_DM_USB support
Ran Wang
- [PATCH v2 07/19] arch: powerpc: add usb node to p2041 dts
Ran Wang
- [PATCH v2 08/19] configs: P2041: enable CONFIG_DM_USB support
Ran Wang
- [PATCH v2 09/19] arch: powerpc: add usb nodes to P4080 dts
Ran Wang
- [PATCH v2 10/19] configs: P4080: enable CONFIG_DM_USB support
Ran Wang
- [PATCH v2 11/19] powerpc: add usb nodes to T102x dts
Ran Wang
- [PATCH v2 12/19] configs: T102x: enable CONFIG_DM_USB support
Ran Wang
- [PATCH v2 13/19] arch: powerpc: add usb nodes to T104x dts
Ran Wang
- [PATCH v2 14/19] configs: T104x: enable CONFIG_DM_USB support
Ran Wang
- [PATCH v2 15/19] configs: T208x: enable CONFIG_DM_USB support
Ran Wang
- [PATCH v2 16/19] arch: powerpc: add usb nodes to T4240 dts
Ran Wang
- [PATCH v2 17/19] configs: T4240: enable CONFIG_DM_USB support
Ran Wang
- [PATCH v2 18/19] arch: powerpc: add usb nodes to P5040 dts
Ran Wang
- [PATCH v2 19/19] configs: P5040: enable CONFIG_DM_USB support
Ran Wang
- [PATCH] armv8: ls1012a: Make USB masters snoopable
Ran Wang
- [U-Boot] [PATCH] test.py: Make search for autoconf.mk more permission
Stephen Warren
- [PATCH 0/2] travis-ci: provide 'addr' in file2env()
Stephen Warren
- [PATCH 0/2] travis-ci: provide 'addr' in file2env()
Stephen Warren
- [PATCH] test_env: don't strip() printenv results
Stephen Warren
- [PATCH 1/1] test/py: Fix broken 'notbuildconfigspec' marker
Stephen Warren
- [PATCH v2 1/1] travis-ci: provide env__efi_fit_tftp_file
Stephen Warren
- [PATCH v2 1/1] travis-ci: Fix "ResourceWarning: unclosed file"
Stephen Warren
- [PATCH v2 1/1] travis-ci: provide env__efi_fit_tftp_file
Stephen Warren
- [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Dalon L Westergreen
- [U-Boot] imx8m: fix rom version check to unbreak some B0 chips
Patrick Wildt
- What is the difference between ARCH_XXX MACH_XXX TARGET_XXX macros
Tim Williams
- U-Boot 2020.01-rc4 - PCI support missing on Trimslice Pro
Stuart Winter
- [PATCH] spi: prevent overriding established bus settings
Marcin Wojtas
- [U-Boot] [PATCH] cmd: pxe: Increase maximum path length
Ben Wolsieffer
- [U-Boot] [PATCH] rockchip: rk3328: rock64: enable CONFIG_MISC_INIT_R
Ben Wolsieffer
- [U-Boot] [PATCH] rockchip: allow loading larger kernels
Ben Wolsieffer
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Derald D. Woods
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Derald D. Woods
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Derald D. Woods
- [PATCH] omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
Derald D. Woods
- [U-Boot] [PATCH 2/3] arm: dts: Add mac node for rk3308 at dtsi level
David Wu
- [U-Boot] [PATCH v2] pwm: rk_pwm: Make PWM driver to support all Rockchip Socs
David Wu
- [U-Boot] [PATCH v2] pinctrl: rockchip: Add pinctrl support for rk3308
David Wu
- Aw: [U-boot,v2,08/10] Add support for MT7622 reference board
Frank Wunderlich
- Aw: Re: [U-Boot] [PATCH] poweroff: add poweroff for mt6323 pmic
Frank Wunderlich
- [U-Boot] [PATCH] x86: use data32 directive instead of macro for operand-size prefix
Masahiro Yamada
- [U-Boot] [PATCH] x86: simplify ljmp to 32-bit code
Masahiro Yamada
- [U-Boot] [PATCH] x86: use data32 directive instead of macro for operand-size prefix
Masahiro Yamada
- [PATCH] binman: fix default filename of u-boot-with-ucode-ptr in documentation
Masahiro Yamada
- [PATCH] include: fix 'ulong' definition on musl targets
Masahiro Yamada
- [PATCH] include: fix 'ulong' definition on musl targets
Masahiro Yamada
- [PATCH 1/1] usb: avoid -Werror=address-of-packed-member
Masahiro Yamada
- [PATCH 1/2] rockchip: rk3308: allow loading larger kernel Image
Andy Yan
- [PATCH 2/2] doc: rockchip: Fix reference the wrong defconfig name of ROC-CC-RK3308
Andy Yan
- [U-Boot] [PATCH 1/2] rockchip: misc: don't fail if eth_addr already set
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: misc: protect serial# from getting overwritten
Kever Yang
- [U-Boot] [PATCH v2 2/3] rockchip: px30: Rename CONFIG_DEBUG_UART2_CHANNEL to CONFIG_DEBUG_UART_CHANNEL
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround
Kever Yang
- [U-Boot] [PATCH 1/4] doc: rockchip: Update build instruction for rk3308
Kever Yang
- [U-Boot] [PATCH 2/4] rockchip: rk3308: enable spl-fifo-mode for emmc
Kever Yang
- [U-Boot] [PATCH 3/4] rockchip: px5: enable spl-fifo-mode for emmc for px5-evb
Kever Yang
- [U-Boot] [PATCH 4/4] rockchip: evb-px5: disable NET
Kever Yang
- [U-Boot] [PATCH 1/3] net: gmac_rockchip: Add support for rk3308
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: rk3399: rockpro64: enable force power on reset workaround
Kever Yang
- [U-Boot] [PATCH] rockchip: config: add support for firefly-px30 board
Kever Yang
- [U-Boot] [PATCH v4 1/2] disk: update to use SPL_PARTITIONS for SPL
Kever Yang
- [PATCH 1/4] rockchip: fit_spl_optee: get text and optee base from build
Kever Yang
- [PATCH 2/4] rockchip: rk3288-evb: update SPL_STACK/MALLOC_LEN config with rk3399
Kever Yang
- [PATCH 3/4] rockchip: rk3288-evb: update CONFIG_NR_DRAM_BANKS to 2
Kever Yang
- [PATCH 4/4] rockchip: rk3288-evb: update config to support OPTEE
Kever Yang
- [PATCH 1/2] rockchip: mkimage: support packing optional second level boot-loader
Kever Yang
- [PATCH] rockchip: rk3328: rock64: enable CONFIG_MISC_INIT_R
Kever Yang
- [PATCH] rockchip: allow loading larger kernels
Kever Yang
- [PATCH v2] pwm: rk_pwm: Make PWM driver to support all Rockchip Socs
Kever Yang
- [PATCH v2] arm: rockchip: rk3308: Initialize the iomux configuration
Kever Yang
- [PATCH v2] pinctrl: rockchip: Add pinctrl support for rk3308
Kever Yang
- [PATCH v2 1/3] rockchip: mkimage: support packing optional second level boot-loader
Kever Yang
- [PATCH 3/3] dts: rk3308: Enable ethernet function supported for Firefly ROC_RK3308_CC
Kever Yang
- [PATCH 2/3] arm: dts: Add mac node for rk3308 at dtsi level
Kever Yang
- Pull request: u-boot-rockchip-20191206
Kever Yang
- Re: [PATCH] rockchip: make_fit_atf: explicitly use python3【请注意,邮件由u-boot-bounces at lists.denx.de代发】
Kever Yang
- [PATCH] rockchip: firefly-px30: Fix the MACRO for CONFIG_DEBUG_UART2_CHANNEL
Kever Yang
- Re: rk3328-firefly ddr4 tpl init【请注意,邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】
Kever Yang
- [PATCH v2 2/3] doc: rockchip: document packing second level loader with mkimage
Kever Yang
- [PATCH v2 3/3] rockchip: mkimage: fix wrong range of rc4 encoding for boot image
Kever Yang
- [PATCH v2] cosmetic: Fix spelling and whitespace errors
Kever Yang
- [PATCH] rockchip: px30-firefly add standalone dts
Kever Yang
- [PATCH 1/2] Revert "rockchip: spi: fix off-by-one in chunk size computation"
Kever Yang
- [PATCH 01/11] spi: rk: Limit transfers to (64K - 1) bytes
Kever Yang
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Kever Yang
- [RESEND PATCH] rockchip: add description for TPL_ROCKCHIP_COMMON_BOARD
Kever Yang
- [PATCH 1/2] rockchip: rk3308: allow loading larger kernel Image
Kever Yang
- [PATCH 2/2] doc: rockchip: Fix reference the wrong defconfig name of ROC-CC-RK3308
Kever Yang
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Kever Yang
- [PATCH 07/11] env: Enable SPI flash env for rockchip
Kever Yang
- [PATCH 08/11] rockchip: dts: Sync ROC-RK3399-PC changes from Linux
Kever Yang
- [PATCH 09/11] roc-pc-rk3399: Enable SPI Flash
Kever Yang
- [PATCH 10/11] rockpro-rk3399: Enable SPI Flash
Kever Yang
- [PATCH 11/11] roc-rk3399-pc: Add SPI boot support
Kever Yang
- [PATCH 06/11] env: kconfig: Restrict rockchip env for MMC
Kever Yang
- [PATCH 05/11] rk3399: Check MMC env while defining it
Kever Yang
- [PATCH 04/11] rk3399: Add boot flash script offet, size
Kever Yang
- [PATCH 02/11] distro_bootcmd: Add SF support
Kever Yang
- [PATCH 1/3] rockchip: rk3328: add COUNTER_FREQUENCY definition
Kever Yang
- [PATCH 2/3] rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmc
Kever Yang
- [PATCH 3/3] rockchip: evb-rk3328: Enable support ATF in SPL
Kever Yang
- [RESEND PATCH 1/7] clk: mediatek: mt7629: add support for ssusbsys
Chunfeng Yun
- [RESEND PATCH 2/7] clk: fix error check for devm_clk_get_optional()
Chunfeng Yun
- [RESEND PATCH 3/7] clk: check valid clock by clk_valid()
Chunfeng Yun
- [RESEND PATCH 4/7] clk: add APIs to get (optional) clock by name without a device
Chunfeng Yun
- [RESEND PATCH 5/7] clk: fixed_rate: add dummy enable() function
Chunfeng Yun
- [RESEND PATCH 6/7] phy: phy-mtk-tphy: remove the check of -ENOSYS
Chunfeng Yun
- [RESEND PATCH 7/7] phy: phy-mtk-tphy: make ref clock optional
Chunfeng Yun
- [RESEND PATCH 1/7] clk: mediatek: mt7629: add support for ssusbsys
Chunfeng Yun
- [PATCH] drivers: net: bcm-sf2: pass -1 to phy_connect()
JD Zheng
- [PATCH v1 1/3] enable ls1046afwry usb network card
Yinbo Zhu
- [PATCH v1 2/3] enable ls1088ardb usb network card
Yinbo Zhu
- [PATCH v1 3/3] enable ls1046afwry usb network card
Yinbo Zhu
- [PATCH v1] T1024RDB: USB: Add a 10808 us delay in usb_scan_port
Yinbo Zhu
- [PATCH v2 1/3] configs: ls1046afwry: Enable usb network card
Yinbo Zhu
- [PATCH v2 2/3] configs: ls1088ardb: Enable usb network card
Yinbo Zhu
- [PATCH v2 3/3] configs: ls1012afwry: Enable usb network card
Yinbo Zhu
- [PATCH v3 1/3] configs: ls1046afwry: Enable usb network cards support
Yinbo Zhu
- [PATCH v3 2/3] configs: ls1088ardb: Enable usb network cards support
Yinbo Zhu
- [PATCH v3 3/3] configs: ls1012afwry: Enable usb network cards support
Yinbo Zhu
- [EXT] Re: [PATCH v1] T1024RDB: USB: Add a 10808 us delay in usb_scan_port
Yinbo Zhu
- [U-Boot] Pull request: u-boot-riscv/master
uboot at andestech.com
- [PATCH] imx8m: ddr_init: Move ddr_init() messages to debug level
sbabic at denx.de
- [PATCH 2/2] mx6sxsabresd: Adjust the mmcdev after DM conversion
sbabic at denx.de
- [PATCH] mx51evk: Fix U-Boot corruption after saving the environment
sbabic at denx.de
- [U-Boot] [PATCH] rtc: rx8010js: add compatible string
sbabic at denx.de
- [PATCH] imx8m_evk: Remove unneeded earlycon string
sbabic at denx.de
- [U-Boot] [PATCH] ARM: imx6q_logic: Cleanup boot sequence check
sbabic at denx.de
- [PATCH] imx8mq_evk: Update the required ATF branch
sbabic at denx.de
- [PATCH v3 2/2] wandboard: Remove repeated PMIC string
sbabic at denx.de
- [PATCH] imx: imx8mq: handle ESDHC in mxc_get_clock
sbabic at denx.de
- [PATCH 1/2] pfuze: Fix the pmic_get() parameter in the DM case
sbabic at denx.de
- [RESEND PATCH v1] colibri_imx6: fix broken fsl_esdhc_imx conversion
sbabic at denx.de
- [PATCH v3 1/2] wandboard: Fix the DM_PMIC conversion
sbabic at denx.de
- [U-Boot] [PATCH] rtc: rx8010sj: fix DM initialization
sbabic at denx.de
- [U-Boot] [PATCH v2 2/2] ARM: i.MX6: TARGET_NITROGEN6X: add 'select MX6QDL'
sbabic at denx.de
- [U-Boot] [PATCH v2 1/2] nitrogen6x: prepare for CONFIG_MX6QDL
sbabic at denx.de
- [PATCH] tools/imximage: share DCD information via Kconfig
sbabic at denx.de
- [PATCH] pico-imx7d: Convert to DM_ETH
sbabic at denx.de
- [U-Boot] [PATCH] rtc: s35392a: add compatible strings
sbabic at denx.de
- [U-Boot] [PATCH 4/4] ARM: mx6: ddr: Add support for iMX6SX
sbabic at denx.de
- [U-Boot] [PATCH] imx: sync with kernel device tree for Phycore SoM
sbabic at denx.de
- [U-Boot] [PATCH v2 2/4] arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
sbabic at denx.de
- [U-Boot] [PATCH v1 22/29] imx6: aristainetos: add version variable
sbabic at denx.de
- [PATCH v5] mx7ulp: Add support for Embedded Artists COM board
sbabic at denx.de
- [U-Boot] [PATCH 3/4] imx: cx9020: enable vidconsole by default
sbabic at denx.de
- [U-Boot] [RESEND PATCH 10/10] board: ge: mx53ppd: use imx wdt
sbabic at denx.de
- [U-Boot] [PATCH] pci: imx: Add iMX6SX compatible
sbabic at denx.de
- [U-Boot] [PATCH v2 1/2] ARM: dts: dh-imx6: add u-boot specific wdt-reboot node
sbabic at denx.de
- [U-Boot] [PATCH v1 17/29] imx6: aristainetos: add DM_I2C support
sbabic at denx.de
- [U-Boot] [PATCH v2 1/4] dt-bindings: add imx-audmux macro definitions
sbabic at denx.de
- [U-Boot] [PATCH v2 2/2] ARM: imx6: DHCOM i.MX6 PDK: Enable sysreset driver and wdt command
sbabic at denx.de
- [U-Boot] [PATCH v1 23/29] imx6: aristainetos: cleanup bootmode settings
sbabic at denx.de
- [U-Boot] [PATCH v1 05/29] imx6: aristainetos: disable gigabit support
sbabic at denx.de
- [U-Boot] [RESEND PATCH 05/10] board: ge: bx50v3: Fix message output to video console
sbabic at denx.de
- [U-Boot] [PATCH v1 3/6] ARM: dts: imx6_apalis: introduce fec node
sbabic at denx.de
- [PATCH 3/3] mx7dsabre: Convert to distroboot support
sbabic at denx.de
- [U-Boot] [PATCH v2 1/3] mach-imx: bootaux: print stack pointer and reset vector
sbabic at denx.de
- [PATCH v2 3/5] colibri_imx6: add update_uboot wrapper
sbabic at denx.de
- [U-Boot] [PATCH v1 02/29] video: lg4573: convert to DM
sbabic at denx.de
- [PATCH 1/3] mx7dsabre: Remove warning about DM_SPI_FLASH
sbabic at denx.de
- [U-Boot] [PATCH v1 26/29] imx6: aristainetos: enable HAB boot
sbabic at denx.de
- [U-Boot] [PATCH v1 01/29] imx6: remove aristainetos board
sbabic at denx.de
- [U-Boot] [PATCH 1/4] ARM: mx6: ddr: Make debug prints work with tiny printf
sbabic at denx.de
- [U-Boot] [PATCH v1 5/6] ARM: dts: imx7: imx7_colibri: introduce fec node
sbabic at denx.de
- [U-Boot] [RESEND PATCH] arm: imx6: cm_fx6: Enable DM SPI and SPI_FLASH, fix SPL build errors
sbabic at denx.de
- [U-Boot] [PATCH v1 08/29] imx6: aristainetos: remove aristainetos-v2.c
sbabic at denx.de
- [U-Boot] [PATCH v2 2/3] mach-imx: bootaux: add dcache flushing before enabling M4
sbabic at denx.de
- [U-Boot] [PATCH v1 29/29] imx6: aristainetos: add support for rev C board
sbabic at denx.de
- [U-Boot] [PATCH v1 04/29] imx6: aristainetos: remove 2b version
sbabic at denx.de
- [U-Boot] [PATCH v1 18/29] imx6: aristainetos: convert to DM_PWM/DM_BACKLIGHT
sbabic at denx.de
- [PATCH v2 5/5] colibri_vf: add update_uboot wrapper
sbabic at denx.de
- [U-Boot] [PATCH v1 07/29] imx6: aristainetos: add thumb build
sbabic at denx.de
- [U-Boot] [PATCH v1 15/29] imx6: aristainetos: enable DM_ETH
sbabic at denx.de
- [U-Boot] [PATCH v1 4/6] apalis_imx6: migrate to DM_ETH
sbabic at denx.de
- [U-Boot] [PATCH 1/2] board: cm_fx6: Enable DM support for video, fix build error
sbabic at denx.de
- [U-Boot] [PATCH v1 27/29] imx6: aristainetos: readd aristainetos 2b board
sbabic at denx.de
- [U-Boot] [PATCH 3/4] ARM: mx6: ddr: Configure all SDQS pullups using loop
sbabic at denx.de
- [PATCH v2 2/5] apalis_imx6: add update_uboot wrapper
sbabic at denx.de
- [U-Boot] [RESEND PATCH 04/10] board: ge: bx50v3: Fix run-time warning
sbabic at denx.de
- [PATCH v2 4/5] colibri-imx6ull: add update_uboot wrapper
sbabic at denx.de
- [U-Boot] [RESEND PATCH 07/10] board: ge: bx50v3: Enable DM for PCI and ethernet
sbabic at denx.de
- [U-Boot] [PATCH v1 2/6] colibri_imx6: migrate to DM_ETH
sbabic at denx.de
- [U-Boot] [PATCH v2 3/4] arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
sbabic at denx.de
- [U-Boot] [PATCH v1 19/29] imx6: aristainetos: get rid of CONFIG_BOARDNAME
sbabic at denx.de
- [U-Boot] [PATCH 1/4] imx: cx9020: migrate cx9020 to CONFIG_DM_ETH
sbabic at denx.de
- [U-Boot] [PATCH v1 10/29] imx6: aristainetos: add DM_SERIAL support
sbabic at denx.de
- [U-Boot] [RESEND PATCH 02/10] board: ge: ppd: sync device tree from Linux
sbabic at denx.de
- [U-Boot] [PATCH v2 4/4] mx6cuboxi: enable OF_CONTROL with DM_MMC and DM_USB
sbabic at denx.de
- [U-Boot] [RESEND PATCH 01/10] board: ge: bx50v3: sync devicetrees from Linux
sbabic at denx.de
- [U-Boot] [PATCH v1 03/29] imx6: aristainetos: move defines to Kconfig
sbabic at denx.de
- [U-Boot] [PATCH 2/4] ARM: mx6: ddr: Factor out SDQS configuration code
sbabic at denx.de
- [U-Boot] [PATCH v1 13/29] imx6: aristainetos: convert to DM_USB
sbabic at denx.de
- [U-Boot] [PATCH v1 09/29] imx6: aristainetos: prepare dts for other board versions
sbabic at denx.de
- [U-Boot] [PATCH v1 2/2] MAINTAINERS: change colibri_imx6/imx6ull/t30/vf maintainers
sbabic at denx.de
- [U-Boot] [PATCH v1 24/29] imx6: aristainetos: WDT DM conversion enable WDT reset
sbabic at denx.de
- [U-Boot] [RESEND PATCH 06/10] configs: ppd: DM for USB and regulators PPD
sbabic at denx.de
- [U-Boot] [PATCH v1 1/2] MAINTAINERS: change apalis_imx6/colibri_imx6 maintainers
sbabic at denx.de
- [U-Boot] [PATCH v1 14/29] imx6: aristainetos: convert CONFIG_DM_SPI
sbabic at denx.de
- [U-Boot] [PATCH v1 11/29] imx6: aristainetos: convert to DM_MMC
sbabic at denx.de
- [U-Boot] [RESEND PATCH 03/10] configs: bx50v3: Fix boot hang with video
sbabic at denx.de
- [PATCH 2/3] mx7dsabre: Enable DM_ETH
sbabic at denx.de
- [U-Boot] [PATCH v1 21/29] imx6: aristainetos: add AUTOBOOT_KEYED
sbabic at denx.de
- [PATCH v6] imx: Add support for i.MX28 based XEA board
sbabic at denx.de
- [U-Boot] [PATCH v1 25/29] imx6: aristainetos: cleanup default Environment
sbabic at denx.de
- [U-Boot] [PATCH 4/4] imx: cx9020: use distro boot
sbabic at denx.de
- [U-Boot] [PATCH v1 06/29] imx6: aristainetos: add device tree from linux
sbabic at denx.de
- [U-Boot] [PATCH 2/4] imx: cx9020: migrate cx9020 to CONFIG_DM_USB
sbabic at denx.de
- [U-Boot] [PATCH v1 20/29] imx6: aristainetos: add i2c eeprom support
sbabic at denx.de
- [U-Boot] [RESEND PATCH 08/10] board: ge: pass rtc_status via device tree
sbabic at denx.de
- [U-Boot] [PATCH v1 1/6] ARM: dts: imx6_colibri: introduce fec node
sbabic at denx.de
- [U-Boot] [PATCH v1 12/29] imx6: aristainetos: convert gpio pins to DM and DTS
sbabic at denx.de
- [U-Boot] [PATCH 2/2] board: cm_fx6: Enable CONFIG_DM_ETH
sbabic at denx.de
- [U-Boot] [RESEND PATCH 09/10] board: ge: bx50v3: use imx wdt
sbabic at denx.de
- [U-Boot] [PATCH v1 16/29] imx6: aristainetos: add DM_VIDEO support
sbabic at denx.de
- [U-Boot] [PATCH v1 6/6] colibri_imx7: migrate to DM_ETH
sbabic at denx.de
- [PATCH v2 1/5] colibri_imx7: add update_uboot wrapper
sbabic at denx.de
- [U-Boot] [PATCH v1 28/29] imx6: aristainetos: add aristainetos 2b csl
sbabic at denx.de
- Raspberry Pi Compute Module 1 mini-UART
edrose
- [PATCH] rockchip: make_fit_atf: explicitly use python3
ml at embed.me.uk
- [PATCH] configs: socfpga: fix building Stratix10 and Agilex
simon.k.r.goldschmidt at gmail.com
- [U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 01/20] configs: stratix10: Remove CONFIG_OF_EMBED
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 02/20] arm: socfpga: add fit source file for pack itb with ATF
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 03/20] arm: socfpga: Add function for checking description from FIT image
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 04/20] arm: socfpga: Load FIT image with ATF support
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 05/20] arm: socfpga: Override 'lowlevel_init' to support ATF
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 06/20] configs: socfpga: Enable FIT image loading with ATF support
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 07/20] arm: socfpga: Disable "spin-table" method for booting Linux
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 08/20] arm: socfpga: Add SMC helper function for Intel SOCFPGA (64bits)
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 09/20] arm: socfpga: Define SMC function identifiers for PSCI SiP services
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 10/20] arm: socfpga: Add secure register access helper functions for SoC 64bits
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 11/20] arm: socfpga: Secure register access for clock manager (SoC 64bits)
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 12/20] arm: socfpga: Secure register access in PHY mode setup
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 13/20] arm: socfpga: Secure register access for reading PLL frequency
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 14/20] mmc: dwmmc: socfpga: Secure register access in MMC driver
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 15/20] net: designware: socfpga: Secure register access in MAC driver
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 16/20] arm: socfpga: Secure register access in Reset Manager driver
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 17/20] arm: socfpga: stratix10: Initialize timer in SPL
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 18/20] arm: socfpga: stratix10: Refactor FPGA reconfig driver to support ATF
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 19/20] arm: socfpga: Bridge reset now invokes SMC calls to query FPGA config status
chee.hong.ang at intel.com
- [U-Boot] [PATCH v1 20/20] sysreset: socfpga: Invoke PSCI call for COLD reset
chee.hong.ang at intel.com
- [PATCH 1/2] rpi: fix dram bank initialization
matthias.bgg at kernel.org
- [PATCH 2/2] rpi: Enable DRAM bank initialization on arm64
matthias.bgg at kernel.org
- [PATCH v2 1/3] rpi: fix dram bank initialization
matthias.bgg at kernel.org
- [PATCH v2 2/3] rpi: Enable DRAM bank initialization on arm64
matthias.bgg at kernel.org
- [PATCH v2 3/3] ARM: defconfig: Fix 32bit config for RPi4
matthias.bgg at kernel.org
- [PATCH 0/7] Add support for MediaTek MT8512 Soc
mingming lee
- [PATCH 1/7] ARM: MediaTek: Add support for MediaTek MT8512 SoC
mingming lee
- [PATCH 2/7] clk: mediatek: adjust common driver for mt8512
mingming lee
- [PATCH 3/7] clk: mediatek: add driver support for MT8512
mingming lee
- [PATCH 4/7] pinctrl: mediatek: add driver for MT8512
mingming lee
- [PATCH 5/7] mmc: mtk-sd: add support for MediaTek MT8512/MT8110 SoCs
mingming lee
- [PATCH 6/7] mmc: mtk-sd: fix hang when data read quickly
mingming lee
- [PATCH 7/7] ARM: MediaTek: add basic support for MT8512 boards
mingming lee
- [PATCH v2 0/8] Add support for MediaTek MT8512 Soc
mingming lee
- [PATCH v2 1/8] ARM: MediaTek: Add support for MediaTek MT8512 SoC
mingming lee
- [PATCH v2 2/8] clk: mediatek: add driver support for MT8512
mingming lee
- [PATCH v2 3/8] clk: mediatek: add set_clr_upd mux type flow
mingming lee
- [PATCH v2 4/8] clk: mediatek: add configurable pcw_chg_reg/ibits/fmin to mtk_pll
mingming lee
- [PATCH v2 5/8] pinctrl: mediatek: add driver for MT8512
mingming lee
- [PATCH v2 6/8] mmc: mtk-sd: add support for MediaTek MT8512/MT8110 SoCs
mingming lee
- [PATCH v2 7/8] mmc: mtk-sd: fix hang when data read quickly
mingming lee
- [PATCH v2 8/8] ARM: MediaTek: add basic support for MT8512 boards
mingming lee
- [PATCHv2 0/2] Intel Stratix10/Agilex Additions
thor.thayer at linux.intel.com
- [PATCHv2 1/2] arm: socfpga: stratix10: Enable SMMU access
thor.thayer at linux.intel.com
- [PATCHv2 2/2] ddr: socfpga: Enable ARM64 Non-Secure SDRAM ECC Access
thor.thayer at linux.intel.com
- [U-Boot] [PATCH] board: Remove unnecessary inclusion of micrel.h from boards
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH v3] gpio: at91_gpio: Add bank names
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH v2 0/4] mtd: spi: spi-nor-core: Add SST vendor specific SFDP parser
Eugen.Hristev at microchip.com
- [U-Boot-Custodians] [ANN] U-Boot v2020.01-rc4 released
Eugen.Hristev at microchip.com
- [PATCH 2/2] video: make BPP and ANSI configs optional
Eugen.Hristev at microchip.com
- [PATCH] configs: sama5d27_som1_ek: Add default config to read ENV from QSPI
Eugen.Hristev at microchip.com
- [PULL] u-boot-atmel-fixes-2020.01-a
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] configs: sama5d27_som1_ek: Add default config to read ENV from QSPI
Swapna.Gurumani at microchip.com
- Sunxi (pine64-lts) SPL load BL32
adam parker
- s5p4418: friendlyarm nanopi2: add support
pm.stefan
- [PATCH 01/12] i2c: designware_i2c: Add more registers
pt
- U-boot: device tree overlay and symbols path
laurent vaudoit
Last message date:
Tue Dec 31 23:51:34 CET 2019
Archived on: Tue Dec 31 23:51:40 CET 2019
This archive was generated by
Pipermail 0.09 (Mailman edition).