[PATCH v2] cosmetic: Fix spelling and whitespace errors
Kever Yang
kever.yang at rock-chips.com
Fri Dec 13 04:26:14 CET 2019
Hi Thomas,
Could you add commit message for patch and split the patch into
multi patches
base on the module?
Thanks,
- Kever
On 2019/11/14 上午10:18, Thomas Hebb wrote:
> Signed-off-by: Thomas Hebb <tommyhebb at gmail.com>
> ---
> Makefile | 2 +-
> README | 16 +++++++++-------
> arch/arm/cpu/armv8/sec_firmware.c | 2 +-
> arch/arm/mach-rockchip/Kconfig | 2 +-
> arch/arm/mach-rockchip/bootrom.c | 4 ++--
> arch/arm/mach-rockchip/rk3399/Kconfig | 6 +++---
> arch/arm/mach-rockchip/spl-boot-order.c | 2 +-
> board/rockchip/evb_rk3399/README | 2 +-
> common/spl/Kconfig | 6 +++---
> doc/README.SPL | 2 +-
> doc/README.TPL | 2 +-
> doc/uImage.FIT/source_file_format.txt | 2 +-
> tools/binman/README | 2 +-
> tools/binman/README.entries | 4 ++--
> 14 files changed, 28 insertions(+), 26 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index 5c8c4c971f..c5d4bd533b 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1663,7 +1663,7 @@ u-boot.sym: u-boot FORCE
> # make sure no implicit rule kicks in
> $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
>
> -# Handle descending into subdirectories listed in $(vmlinux-dirs)
> +# Handle descending into subdirectories listed in $(u-boot-dirs)
> # Preset locale variables to speed up the build process. Limit locale
> # tweaks to this spot to avoid wrong language settings when running
> # make menuconfig etc.
> diff --git a/README b/README
> index 1389e8ff12..d047b3b3dd 100644
> --- a/README
> +++ b/README
> @@ -3082,14 +3082,16 @@ Low Level (hardware related) configuration options:
> instruction cache) is still performed.
>
> - CONFIG_SPL_BUILD
> - Modifies the behaviour of start.S when compiling a loader
> - that is executed before the actual U-Boot. E.g. when
> - compiling a NAND SPL.
> + Set when the currently-running compilation is for an artifact
> + that will end up in the SPL (as opposed to the TPL or U-Boot
> + proper). Code that needs stage-specific behavior should check
> + this.
>
> - CONFIG_TPL_BUILD
> - Modifies the behaviour of start.S when compiling a loader
> - that is executed after the SPL and before the actual U-Boot.
> - It is loaded by the SPL.
> + Set when the currently-running compilation is for an artifact
> + that will end up in the TPL (as opposed to the SPL or U-Boot
> + proper). Code that needs stage-specific behavior should check
> + this.
>
> - CONFIG_SYS_MPC85XX_NO_RESETVEC
> Only for 85xx systems. If this variable is specified, the section
> @@ -3306,7 +3308,7 @@ Testing of U-Boot Modifications, Ports to New Hardware, etc.:
> If you have modified U-Boot sources (for instance added a new board
> or support for new devices, a new CPU, etc.) you are expected to
> provide feedback to the other developers. The feedback normally takes
> -the form of a "patch", i. e. a context diff against a certain (latest
> +the form of a "patch", i.e. a context diff against a certain (latest
> official or latest in the git repository) version of U-Boot sources.
>
> But before you submit such a patch, please verify that your modifi-
> diff --git a/arch/arm/cpu/armv8/sec_firmware.c b/arch/arm/cpu/armv8/sec_firmware.c
> index 8dc0ac9266..4b3eb71cef 100644
> --- a/arch/arm/cpu/armv8/sec_firmware.c
> +++ b/arch/arm/cpu/armv8/sec_firmware.c
> @@ -353,7 +353,7 @@ bool sec_firmware_support_hwrng(void)
> return true;
> #endif
> if (sec_firmware_addr & SEC_FIRMWARE_RUNNING) {
> - return true;
> + return true;
> }
>
> return false;
> diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
> index f5a80b4f0c..1b7f82f596 100644
> --- a/arch/arm/mach-rockchip/Kconfig
> +++ b/arch/arm/mach-rockchip/Kconfig
> @@ -265,7 +265,7 @@ config TPL_ROCKCHIP_COMMON_BOARD
> Rockchip SoCs have similar boot process, prefer to use TPL for DRAM
> init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL
> common board is a basic TPL board init which can be shared for most
> - of SoCs to avoid copy-pase for different SoCs.
> + of SoCs to avoid copy-paste for different SoCs.
>
> config ROCKCHIP_BOOT_MODE_REG
> hex "Rockchip boot mode flag register address"
> diff --git a/arch/arm/mach-rockchip/bootrom.c b/arch/arm/mach-rockchip/bootrom.c
> index 9ccb45e6ac..10614c99d9 100644
> --- a/arch/arm/mach-rockchip/bootrom.c
> +++ b/arch/arm/mach-rockchip/bootrom.c
> @@ -39,8 +39,8 @@ void back_to_bootrom(enum rockchip_bootrom_cmd brom_cmd)
> * to check it and back to bootrom at very early bootstage(before
> * some basic configurations(such as interrupts) been
> * changed by TPL/SPL, as the bootrom download operation
> - * relys on many default settings(such as interrupts) by
> - * it's self.
> + * relies on many default settings(such as interrupts) by
> + * itself.
> */
> static bool check_back_to_brom_dnl_flag(void)
> {
> diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
> index 6660d05349..8e43e52e3c 100644
> --- a/arch/arm/mach-rockchip/rk3399/Kconfig
> +++ b/arch/arm/mach-rockchip/rk3399/Kconfig
> @@ -6,9 +6,9 @@ choice
> config TARGET_EVB_RK3399
> bool "RK3399 evaluation board"
> help
> - RK3399evb is a evaluation board for Rockchp rk3399,
> - with full function and phisical connectors support like type-C ports,
> - usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial...
> + RK3399evb is a evaluation board for Rockchip RK3399,
> + with full function and physical connectors support like Type-C ports,
> + USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial...
>
> config TARGET_PUMA_RK3399
> bool "Theobroma Systems RK3399-Q7 (Puma)"
> diff --git a/arch/arm/mach-rockchip/spl-boot-order.c b/arch/arm/mach-rockchip/spl-boot-order.c
> index fa8e096426..c147d5821e 100644
> --- a/arch/arm/mach-rockchip/spl-boot-order.c
> +++ b/arch/arm/mach-rockchip/spl-boot-order.c
> @@ -35,7 +35,7 @@ static int spl_node_to_boot_device(int node)
> /*
> * This should eventually move into the SPL code, once SPL becomes
> * aware of the block-device layer. Until then (and to avoid unneeded
> - * delays in getting this feature out, it lives at the board-level).
> + * delays in getting this feature out), it lives at the board-level.
> */
> if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) {
> struct udevice *dev;
> diff --git a/board/rockchip/evb_rk3399/README b/board/rockchip/evb_rk3399/README
> index ea3258cf37..da7ae89ab1 100644
> --- a/board/rockchip/evb_rk3399/README
> +++ b/board/rockchip/evb_rk3399/README
> @@ -9,7 +9,7 @@ RK3399 key features we might use in U-Boot:
> * DRAM: 4GB-128MB dual-channel
> * eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50
> * SD/MMC: support SD 3.0, MMC 4.51
> -* USB: USB3.0 typc-C port *2 with dwc3 controller
> +* USB: USB3.0 type-C port *2 with dwc3 controller
> * USB2.0 EHCI host port *2
> * Display: RGB/HDMI/DP/MIPI/EDP
>
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index 8f0ba8ef83..f0d89afa0b 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -268,7 +268,7 @@ config SPL_BANNER_PRINT
> default y
> help
> If this option is enabled, SPL will print the banner with version
> - info. Disabling this option could be useful to reduce TPL boot time
> + info. Disabling this option could be useful to reduce SPL boot time
> (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
>
> config TPL_BANNER_PRINT
> @@ -276,8 +276,8 @@ config TPL_BANNER_PRINT
> depends on TPL
> default y
> help
> - If this option is enabled, SPL will not print the banner with version
> - info. Disabling this option could be useful to reduce SPL boot time
> + If this option is enabled, TPL will print the banner with version
> + info. Disabling this option could be useful to reduce TPL boot time
> (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
>
> config SPL_EARLY_BSS
> diff --git a/doc/README.SPL b/doc/README.SPL
> index 6eed83f8c5..3c931ec720 100644
> --- a/doc/README.SPL
> +++ b/doc/README.SPL
> @@ -75,7 +75,7 @@ with:
> - the nodes with one pre-relocation property:
> 'u-boot,dm-pre-reloc' or 'u-boot,dm-spl'
>
> -ftgrep is also used to remove:
> +fdtgrep is also used to remove:
> - the properties defined in CONFIG_OF_SPL_REMOVE_PROPS
> - all the pre-relocation properties
> ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl')
> diff --git a/doc/README.TPL b/doc/README.TPL
> index c94129fdc9..72027fd692 100644
> --- a/doc/README.TPL
> +++ b/doc/README.TPL
> @@ -31,7 +31,7 @@ make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD.
>
> The SPL options are shared by SPL and TPL, the board config file should
> determine which SPL options to choose based on whether CONFIG_TPL_BUILD
> -is set. Source files can be compiled for TPL with options choosed in the
> +is set. Source files can be compiled for TPL with options chosen in the
> board config file.
>
> TPL use a small device tree (u-boot-tpl.dtb), containing only the nodes with
> diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt
> index f8e27ed34e..18d2aedcb7 100644
> --- a/doc/uImage.FIT/source_file_format.txt
> +++ b/doc/uImage.FIT/source_file_format.txt
> @@ -262,7 +262,7 @@ o config-1
> - loadables : Unit name containing a list of additional binaries to be
> loaded at their given locations. "loadables" is a comma-separated list
> of strings. U-Boot will load each binary at its given start-address and
> - may optionaly invoke additional post-processing steps on this binary based
> + may optionally invoke additional post-processing steps on this binary based
> on its component image node type.
> - compatible : The root compatible string of the U-Boot device tree that
> this configuration shall automatically match when CONFIG_FIT_BEST_MATCH is
> diff --git a/tools/binman/README b/tools/binman/README
> index c96a564226..47254bd1e6 100644
> --- a/tools/binman/README
> +++ b/tools/binman/README
> @@ -73,7 +73,7 @@ any dependencies between them
> and brought in as needed
> - Provides for a standard image description available in the build and at
> run-time
> -- SoC-specific image-signing tools can be accomodated
> +- SoC-specific image-signing tools can be accommodated
> - Avoids cluttering the U-Boot build system with image-building code
> - The image description is automatically available at run-time in U-Boot,
> SPL. It can be made available to other software also
> diff --git a/tools/binman/README.entries b/tools/binman/README.entries
> index 1099433521..0576e63a86 100644
> --- a/tools/binman/README.entries
> +++ b/tools/binman/README.entries
> @@ -519,7 +519,7 @@ Properties / Entry arguments:
>
> This file contains code used by the SoC that is required to make it work.
> The Management Engine is like a background task that runs things that are
> -not clearly documented, but may include keyboard, deplay and network
> +not clearly documented, but may include keyboard, display and network
> access. For platform that use ME it is not possible to disable it. U-Boot
> does not directly execute code in the ME binary.
>
> @@ -593,7 +593,7 @@ Entry: powerpc-mpc85xx-bootpg-resetvec: PowerPC mpc85xx bootpg + resetvec code f
> Properties / Entry arguments:
> - filename: Filename of u-boot-br.bin (default 'u-boot-br.bin')
>
> -This enrty is valid for PowerPC mpc85xx cpus. This entry holds
> +This entry is valid for PowerPC mpc85xx cpus. This entry holds
> 'bootpg + resetvec' code for PowerPC mpc85xx CPUs which needs to be
> placed at offset 'RESET_VECTOR_ADDRESS - 0xffc'.
>
More information about the U-Boot
mailing list