[U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
simon.k.r.goldschmidt at gmail.com
Mon Dec 2 14:27:49 CET 2019
On Mon, Dec 2, 2019 at 11:25 AM <chee.hong.ang at intel.com> wrote:
>
> From: "Ang, Chee Hong" <chee.hong.ang at intel.com>
>
> New U-boot flow with ARM Trusted Firmware (ATF) support:
> SPL (EL3) -> ATF-BL31 (EL3) -> U-Boot Proper (EL2) -> Linux (EL1)
Adding support for ATF means that using U-Boot on Stratix10 and Agilex without
ATF keeps working, right?
>
> SPL loads the u-boot.itb which consist of:
> 1) u-boot-nodtb.bin (U-Boot Proper image)
> 2) u-boot.dtb (U-Boot Proper DTB)
> 3) bl31.bin (ATF-BL31 image)
>
> Supported Platform: Intel SoCFPGA 64bits (Stratix10 & Agilex)
>
> Now, U-Boot Proper is running in non-secure mode (EL2), it invokes
> SMC/PSCI calls provided by ATF to perform COLD reset, System Manager
> register accesses and mailbox communications with Secure Device Manager
> (SDM).
>
> Steps to build the U-Boot with ATF support:
> 1) Build U-Boot
> 2) Build ATF BL31
> 3) Copy ATF BL31 binary image into U-Boot's root folder
> 4) "make u-boot.itb" to generate u-boot.itb
>
> These patchsets have dependency on:
> [U-Boot,v8,00/19] Add Intel Agilex SoC support:
> https://patchwork.ozlabs.org/cover/1201373/
>
> Chee Hong Ang (19):
> arm: socfpga: add fit source file for pack itb with ATF
> arm: socfpga: Add function for checking description from FIT image
> arm: socfpga: Load FIT image with ATF support
> arm: socfpga: Override 'lowlevel_init' to support ATF
> configs: socfpga: Enable FIT image loading with ATF support
> arm: socfpga: Disable "spin-table" method for booting Linux
> arm: socfpga: Add SMC helper function for Intel SOCFPGA (64bits)
> arm: socfpga: Define SMC function identifiers for PSCI SiP services
> arm: socfpga: Add secure register access helper functions for SoC
> 64bits
> arm: socfpga: Secure register access for clock manager (SoC 64bits)
> arm: socfpga: Secure register access in PHY mode setup
> arm: socfpga: Secure register access for reading PLL frequency
> mmc: dwmmc: socfpga: Secure register access in MMC driver
> net: designware: socfpga: Secure register access in MAC driver
> arm: socfpga: Secure register access in Reset Manager driver
> arm: socfpga: stratix10: Initialize timer in SPL
> arm: socfpga: stratix10: Refactor FPGA reconfig driver to support ATF
> arm: socfpga: Bridge reset now invokes SMC calls to query FPGA config
> status
> sysreset: socfpga: Invoke PSCI call for COLD reset
>
> Dalon Westergreen (1):
> configs: stratix10: Remove CONFIG_OF_EMBED
This one is included in another series already:
https://patchwork.ozlabs.org/user/todo/uboot/?series=132976
Does this mean that one will be abandonen?
So the combined hex output part of that series is not required any more?
Regards,
Simon
>
> arch/arm/mach-socfpga/Kconfig | 2 -
> arch/arm/mach-socfpga/Makefile | 4 +
> arch/arm/mach-socfpga/board.c | 10 +
> arch/arm/mach-socfpga/clock_manager_agilex.c | 5 +-
> arch/arm/mach-socfpga/clock_manager_s10.c | 5 +-
> arch/arm/mach-socfpga/include/mach/misc.h | 3 +
> .../mach-socfpga/include/mach/secure_reg_helper.h | 20 ++
> arch/arm/mach-socfpga/lowlevel_init.S | 48 +++
> arch/arm/mach-socfpga/misc_s10.c | 47 ++-
> arch/arm/mach-socfpga/reset_manager_s10.c | 31 +-
> arch/arm/mach-socfpga/secure_reg_helper.c | 67 ++++
> arch/arm/mach-socfpga/timer_s10.c | 3 +-
> arch/arm/mach-socfpga/wrap_pll_config_s10.c | 9 +-
> board/altera/soc64/its/fit_spl_atf.its | 51 +++
> configs/socfpga_agilex_defconfig | 8 +-
> configs/socfpga_stratix10_defconfig | 9 +-
> drivers/fpga/stratix10.c | 261 ++++----------
> drivers/mmc/socfpga_dw_mmc.c | 7 +-
> drivers/net/dwmac_socfpga.c | 5 +-
> drivers/sysreset/sysreset_socfpga_s10.c | 4 +-
> include/configs/socfpga_soc64_common.h | 2 +-
> include/linux/intel-smc.h | 374 +++++++++++++++++++++
> 22 files changed, 732 insertions(+), 243 deletions(-)
> create mode 100644 arch/arm/mach-socfpga/include/mach/secure_reg_helper.h
> create mode 100644 arch/arm/mach-socfpga/lowlevel_init.S
> create mode 100644 arch/arm/mach-socfpga/secure_reg_helper.c
> create mode 100644 board/altera/soc64/its/fit_spl_atf.its
> create mode 100644 include/linux/intel-smc.h
>
> --
> 2.7.4
>
More information about the U-Boot
mailing list