[U-Boot] [PATCH v1 00/20] Enable ARM Trusted Firmware for U-Boot

Ang, Chee Hong chee.hong.ang at intel.com
Mon Dec 2 14:38:10 CET 2019


> On Mon, Dec 2, 2019 at 11:25 AM <chee.hong.ang at intel.com> wrote:
> >
> > From: "Ang, Chee Hong" <chee.hong.ang at intel.com>
> >
> > New U-boot flow with ARM Trusted Firmware (ATF) support:
> > SPL (EL3) -> ATF-BL31 (EL3) -> U-Boot Proper (EL2) -> Linux (EL1)
> 
> Adding support for ATF means that using U-Boot on Stratix10 and Agilex without
> ATF keeps working, right?
ATF is needed in order for Stratix10 and Agilex's U-Boot to work.
> >
> > SPL loads the u-boot.itb which consist of:
> > 1) u-boot-nodtb.bin (U-Boot Proper image)
> > 2) u-boot.dtb (U-Boot Proper DTB)
> > 3) bl31.bin (ATF-BL31 image)
> >
> > Supported Platform: Intel SoCFPGA 64bits (Stratix10 & Agilex)
> >
> > Now, U-Boot Proper is running in non-secure mode (EL2), it invokes
> > SMC/PSCI calls provided by ATF to perform COLD reset, System Manager
> > register accesses and mailbox communications with Secure Device
> > Manager (SDM).
> >
> > Steps to build the U-Boot with ATF support:
> > 1) Build U-Boot
> > 2) Build ATF BL31
> > 3) Copy ATF BL31 binary image into U-Boot's root folder
> > 4) "make u-boot.itb" to generate u-boot.itb
> >
> > These patchsets have dependency on:
> > [U-Boot,v8,00/19] Add Intel Agilex SoC support:
> > https://patchwork.ozlabs.org/cover/1201373/
> >
> > Chee Hong Ang (19):
> >   arm: socfpga: add fit source file for pack itb with ATF
> >   arm: socfpga: Add function for checking description from FIT image
> >   arm: socfpga: Load FIT image with ATF support
> >   arm: socfpga: Override 'lowlevel_init' to support ATF
> >   configs: socfpga: Enable FIT image loading with ATF support
> >   arm: socfpga: Disable "spin-table" method for booting Linux
> >   arm: socfpga: Add SMC helper function for Intel SOCFPGA (64bits)
> >   arm: socfpga: Define SMC function identifiers for PSCI SiP services
> >   arm: socfpga: Add secure register access helper functions for SoC
> >     64bits
> >   arm: socfpga: Secure register access for clock manager (SoC 64bits)
> >   arm: socfpga: Secure register access in PHY mode setup
> >   arm: socfpga: Secure register access for reading PLL frequency
> >   mmc: dwmmc: socfpga: Secure register access in MMC driver
> >   net: designware: socfpga: Secure register access in MAC driver
> >   arm: socfpga: Secure register access in Reset Manager driver
> >   arm: socfpga: stratix10: Initialize timer in SPL
> >   arm: socfpga: stratix10: Refactor FPGA reconfig driver to support ATF
> >   arm: socfpga: Bridge reset now invokes SMC calls to query FPGA config
> >     status
> >   sysreset: socfpga: Invoke PSCI call for COLD reset
> >
> > Dalon Westergreen (1):
> >   configs: stratix10: Remove CONFIG_OF_EMBED
> 
> This one is included in another series already:
> https://patchwork.ozlabs.org/user/todo/uboot/?series=132976
> 
> Does this mean that one will be abandonen?
> So the combined hex output part of that series is not required any more?
> 
> Regards,
> Simon
> 
> >
> >  arch/arm/mach-socfpga/Kconfig                      |   2 -
> >  arch/arm/mach-socfpga/Makefile                     |   4 +
> >  arch/arm/mach-socfpga/board.c                      |  10 +
> >  arch/arm/mach-socfpga/clock_manager_agilex.c       |   5 +-
> >  arch/arm/mach-socfpga/clock_manager_s10.c          |   5 +-
> >  arch/arm/mach-socfpga/include/mach/misc.h          |   3 +
> >  .../mach-socfpga/include/mach/secure_reg_helper.h  |  20 ++
> >  arch/arm/mach-socfpga/lowlevel_init.S              |  48 +++
> >  arch/arm/mach-socfpga/misc_s10.c                   |  47 ++-
> >  arch/arm/mach-socfpga/reset_manager_s10.c          |  31 +-
> >  arch/arm/mach-socfpga/secure_reg_helper.c          |  67 ++++
> >  arch/arm/mach-socfpga/timer_s10.c                  |   3 +-
> >  arch/arm/mach-socfpga/wrap_pll_config_s10.c        |   9 +-
> >  board/altera/soc64/its/fit_spl_atf.its             |  51 +++
> >  configs/socfpga_agilex_defconfig                   |   8 +-
> >  configs/socfpga_stratix10_defconfig                |   9 +-
> >  drivers/fpga/stratix10.c                           | 261 ++++----------
> >  drivers/mmc/socfpga_dw_mmc.c                       |   7 +-
> >  drivers/net/dwmac_socfpga.c                        |   5 +-
> >  drivers/sysreset/sysreset_socfpga_s10.c            |   4 +-
> >  include/configs/socfpga_soc64_common.h             |   2 +-
> >  include/linux/intel-smc.h                          | 374 +++++++++++++++++++++
> >  22 files changed, 732 insertions(+), 243 deletions(-)  create mode
> > 100644 arch/arm/mach-socfpga/include/mach/secure_reg_helper.h
> >  create mode 100644 arch/arm/mach-socfpga/lowlevel_init.S
> >  create mode 100644 arch/arm/mach-socfpga/secure_reg_helper.c
> >  create mode 100644 board/altera/soc64/its/fit_spl_atf.its
> >  create mode 100644 include/linux/intel-smc.h
> >
> > --
> > 2.7.4
> >


More information about the U-Boot mailing list