[U-Boot] [PATCH v3 2/2] ARM: dts: imx6ull-colibri: pre-reloc for uart pinmux modes

[Stefano Babic]

Hi Igor,

On 03/11/19 17:21, Igor Opaniuk wrote:
> Hi Stefano,
> 
> On Wed, Oct 16, 2019 at 12:39 PM Igor Opaniuk <igor.opaniuk at gmail.com> wrote:
>>
>> From: Igor Opaniuk <igor.opaniuk at toradex.com>
>>
>> Add u-boot,dm-pre-reloc properties for uart pinmux configuration
>> nodes, which enables UART as early as possible (before relocation).
>>
>> Without this we miss almost the half of output (U-boot version,
>> CPU defails, Reset cause, DRAM details etc.).
>>
>> Fixes: cd69e8ef9b ("colibri-imx6ull: migrate pinctrl and regulators to dtb/dm")
>> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
>> Reviewed-by: Fabio Estevam <festevam at gmail.com>
>> Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
>> ---
>>
>>  arch/arm/dts/imx6ull-colibri-u-boot.dtsi | 8 ++++++++
>>  1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/dts/imx6ull-colibri-u-boot.dtsi b/arch/arm/dts/imx6ull-colibri-u-boot.dtsi
>> index e81ac8cb27..531cdcc4da 100644
>> --- a/arch/arm/dts/imx6ull-colibri-u-boot.dtsi
>> +++ b/arch/arm/dts/imx6ull-colibri-u-boot.dtsi
>> @@ -2,3 +2,11 @@
>>  /*
>>   * Copyright 2019 Toradex AG
>>   */
>> +
>> +&pinctrl_uart1 {
>> +       u-boot,dm-pre-reloc;
>> +};
>> +
>> +&pinctrl_uart1_ctrl1 {
>> +       u-boot,dm-pre-reloc;
>> +};
>> --
>> 2.17.1
>>
> 
> Could you please also apply this patchset?
> 

This patchset is in "Changes requested" in patchwork. I tried to pick
them up and patches need a rebase on current master. Can you rebase them
and repost ? Thanks !

Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================