[PATCH v1 2/2] treewide: Remove CONFIG_SYS_UBOOT_START from configs board files
Lukasz Majewski
lukma at denx.de
Sun Dec 8 15:24:44 CET 2019
On Fri, 6 Dec 2019 15:01:49 +0100
Patrice Chotard <patrice.chotard at st.com> wrote:
> As previous CONFIG_SYS_UBOOT_START is now set by default to
> CONFIG_SYS_TEXT_BASE when not defined, CONFIG_SYS_UBOOT_START
> can be removed from include/configs board files.
>
> Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
>
> ---
>
> include/configs/gardena-smart-gateway-at91sam.h | 1 -
> include/configs/ls1046a_common.h | 1 -
> include/configs/mccmon6.h | 1 -
> include/configs/microblaze-generic.h | 2 --
> include/configs/mt7623.h | 1 -
> include/configs/mt7629.h | 1 -
> include/configs/mt8518.h | 1 -
> include/configs/omap3_cairo.h | 1 -
> include/configs/pumpkin.h | 1 -
> include/configs/tegra-common.h | 1 -
> include/configs/x600.h | 1 -
> include/configs/xilinx_zynqmp_r5.h | 2 --
> include/configs/zynq-common.h | 2 --
> 13 files changed, 16 deletions(-)
>
> diff --git a/include/configs/gardena-smart-gateway-at91sam.h
> b/include/configs/gardena-smart-gateway-at91sam.h index
> 482e4714b1..f5ee65cb8a 100644 ---
> a/include/configs/gardena-smart-gateway-at91sam.h +++
> b/include/configs/gardena-smart-gateway-at91sam.h @@ -64,7 +64,6 @@
> #define CONFIG_SPL_NAND_RAW_ONLY
> #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
> #define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000
> -#define CONFIG_SYS_UBOOT_START
> CONFIG_SYS_TEXT_BASE #define
> CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define
> CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
> diff --git a/include/configs/ls1046a_common.h
> b/include/configs/ls1046a_common.h index cc8f4c0210..6543cfd868 100644
> --- a/include/configs/ls1046a_common.h
> +++ b/include/configs/ls1046a_common.h
> @@ -98,7 +98,6 @@
> CONFIG_SPL_BSS_MAX_SIZE)
> #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
> #define CONFIG_SYS_MONITOR_LEN 0x100000
> -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> #endif
>
> /* NAND SPL */
> diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h
> index 045a9f7bdf..0aee1e1cf6 100644
> --- a/include/configs/mccmon6.h
> +++ b/include/configs/mccmon6.h
> @@ -12,7 +12,6 @@
> #define CONFIG_SPL_LIBCOMMON_SUPPORT
> #include "imx6_spl.h"
>
> -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
> #define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
>
> diff --git a/include/configs/microblaze-generic.h
> b/include/configs/microblaze-generic.h index 385b30c99b..8ca0e83c78
> 100644 --- a/include/configs/microblaze-generic.h
> +++ b/include/configs/microblaze-generic.h
> @@ -173,8 +173,6 @@
> /* Just for sure that there is a space for stack */
> #define CONFIG_SPL_STACK_SIZE 0x100
>
> -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> -
> #define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
> CONFIG_SYS_INIT_RAM_ADDR - \
> CONFIG_SYS_MALLOC_F_LEN - \
> diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h
> index e5182aeea8..faab0913fc 100644
> --- a/include/configs/mt7623.h
> +++ b/include/configs/mt7623.h
> @@ -31,7 +31,6 @@
> #define CONFIG_ENV_OVERWRITE
>
> /* Preloader -> Uboot */
> -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE
> + SZ_2M - \ GENERATED_GBL_DATA_SIZE)
>
> diff --git a/include/configs/mt7629.h b/include/configs/mt7629.h
> index 4aef894c6e..6a6c2f2414 100644
> --- a/include/configs/mt7629.h
> +++ b/include/configs/mt7629.h
> @@ -40,7 +40,6 @@
> #define CONFIG_SYS_UBOOT_BASE (CONFIG_SPI_ADDR +
> CONFIG_SPL_PAD_TO)
> /* SPL -> Uboot */
> -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE
> + SZ_2M - \ GENERATED_GBL_DATA_SIZE)
>
> diff --git a/include/configs/mt8518.h b/include/configs/mt8518.h
> index a7fe83a605..514722be99 100644
> --- a/include/configs/mt8518.h
> +++ b/include/configs/mt8518.h
> @@ -29,7 +29,6 @@
> #define CONFIG_SYS_BOOTM_LEN SZ_64M
>
> /* Uboot definition */
> -#define CONFIG_SYS_UBOOT_START
> CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_INIT_SP_ADDR
> (CONFIG_SYS_TEXT_BASE + \ SZ_2M - \
> GENERATED_GBL_DATA_SIZE)
> diff --git a/include/configs/omap3_cairo.h
> b/include/configs/omap3_cairo.h index 1b1a56d7cd..c76c81ddd5 100644
> --- a/include/configs/omap3_cairo.h
> +++ b/include/configs/omap3_cairo.h
> @@ -26,7 +26,6 @@
> * other needs. We use this rather than the inherited defines from
> * ti_armv7_common.h for backwards compatibility.
> */
> -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> #define CONFIG_SPL_BSS_START_ADDR 0x80000000
> #define CONFIG_SPL_BSS_MAX_SIZE (512 << 10) /*
> 512 KB */ #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
> diff --git a/include/configs/pumpkin.h b/include/configs/pumpkin.h
> index 35e28be950..9c52cae41d 100644
> --- a/include/configs/pumpkin.h
> +++ b/include/configs/pumpkin.h
> @@ -23,7 +23,6 @@
> #define CONFIG_SYS_NS16550_COM1 0x11005000
> #define CONFIG_SYS_NS16550_CLK 26000000
>
> -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE
> + SZ_2M - \ GENERATED_GBL_DATA_SIZE)
>
> diff --git a/include/configs/tegra-common.h
> b/include/configs/tegra-common.h index b4da1f8428..f2cdd9c019 100644
> --- a/include/configs/tegra-common.h
> +++ b/include/configs/tegra-common.h
> @@ -61,7 +61,6 @@
> #define PHYS_SDRAM_1 NV_PA_SDRC_CS0
> #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
>
> -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
>
> #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
> diff --git a/include/configs/x600.h b/include/configs/x600.h
> index 63092b24a5..8b6caae7be 100644
> --- a/include/configs/x600.h
> +++ b/include/configs/x600.h
> @@ -27,7 +27,6 @@
> #define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
> #define CONFIG_SYS_UBOOT_BASE
> (CONFIG_SYS_FLASH_BASE + \ CONFIG_SYS_SPL_LEN)
> -#define CONFIG_SYS_UBOOT_START
> CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_BASE
> CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_MONITOR_LEN
> 0x60000
> diff --git a/include/configs/xilinx_zynqmp_r5.h
> b/include/configs/xilinx_zynqmp_r5.h index 38d952d0c0..155d7fe883
> 100644 --- a/include/configs/xilinx_zynqmp_r5.h
> +++ b/include/configs/xilinx_zynqmp_r5.h
> @@ -35,8 +35,6 @@
> /* Extend size of kernel image for uncompression */
> #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
>
> -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> -
> #define CONFIG_SKIP_LOWLEVEL_INIT
>
> /* 0x0 - 0x40 is used for placing exception vectors */
> diff --git a/include/configs/zynq-common.h
> b/include/configs/zynq-common.h index 274cc19112..189ca81bbe 100644
> --- a/include/configs/zynq-common.h
> +++ b/include/configs/zynq-common.h
> @@ -274,6 +274,4 @@
>
> #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
>
> -#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> -
> #endif /* __CONFIG_ZYNQ_COMMON_H */
Acked-by: Lukasz Majewski <lukma at denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191208/af449129/attachment.sig>
More information about the U-Boot
mailing list