i.MX8MM-EVK Boot failure

[Fabio Estevam]

Hi Adam,

On Wed, Dec 11, 2019 at 9:58 AM Adam Ford <aford173 at gmail.com> wrote:

> For what it's worth, I went to use the firmware from 7.9 as stated in
> part of the readme (since the README states both 8.0 and 7.9), and I
> used the ATF from 4.19.35_1.1.0, and it booted once I commented out
> the sdhc2 cd-gpio lines.

Thanks for the suggestion. I can boot imx8mq-evk if I use the
imx_4.19.35_1.0.0 ATF branch.

I will send a patch updating the imx8mq-evk README.

Thanks